Migration pull request
- Avihai's fix to allow vmstate iterators to not starve for VFIO
- Maksim's fix on additional check on precopy load error
- Fabiano's fix on fdatasync() hang in mapped-ram
- Jonathan's fix on vring cached access over MMIO regions
- Cedric's cleanup patches 1-4 out of his error report series
- Yu's fix for RDMA migration (which used to be broken even for 8.2)
- Anthony's small cleanup/fix on err message
- Steve's patches on privatize migration.h
- Xiang's patchset to enable zero page detections in multifd threads
# -----BEGIN PGP SIGNATURE-----
#
# iIgEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZe9+uBIccGV0ZXJ4QHJl
# ZGhhdC5jb20ACgkQO1/MzfOr1wamaQD/SvmpMEcuRndT9LPSxzXowAGDZTBpYUfv
# 5XAbx80dS9IBAO8PJJgQJIBHBeacyLBjHP9CsdVtgw5/VW+wCsbfV4AB
# =xavb
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 11 Mar 2024 21:59:20 GMT
# gpg: using EDDSA key B9184DC20CC457DACF7DD1A93B5FCCCDF3ABD706
# gpg: issuer "peterx@redhat.com"
# gpg: Good signature from "Peter Xu <xzpeter@gmail.com>" [marginal]
# gpg: aka "Peter Xu <peterx@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: B918 4DC2 0CC4 57DA CF7D D1A9 3B5F CCCD F3AB D706
* tag 'migration-20240311-pull-request' of https://gitlab.com/peterx/qemu: (34 commits)
migration/multifd: Add new migration test cases for legacy zero page checking.
migration/multifd: Enable multifd zero page checking by default.
migration/multifd: Implement ram_save_target_page_multifd to handle multifd version of MigrationOps::ram_save_target_page.
migration/multifd: Implement zero page transmission on the multifd thread.
migration/multifd: Add new migration option zero-page-detection.
migration/multifd: Allow clearing of the file_bmap from multifd
migration/multifd: Allow zero pages in file migration
migration: purge MigrationState from public interface
migration: delete unused accessors
migration: privatize colo interfaces
migration: migration_file_set_error
migration: migration_is_device
migration: migration_thread_is_self
migration: export vcpu_dirty_limit_period
migration: export migration_is_running
migration: export migration_is_active
migration: export migration_is_setup_or_active
migration: remove migration.h references
migration: export fewer options
migration: Fix format in error message
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that zero page checking is done on the multifd sender threads by
default, we still provide an option for backward compatibility. This
change adds a qtest migration test case to set the zero-page-detection
option to "legacy" and run multifd migration with zero page checking on the
migration main thread.
Signed-off-by: Hao Xiang <hao.xiang@bytedance.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20240311180015.3359271-8-hao.xiang@linux.dev
Signed-off-by: Peter Xu <peterx@redhat.com>
1. Set default "zero-page-detection" option to "multifd". Now
zero page checking can be done in the multifd threads and this
becomes the default configuration.
2. Handle migration QEMU9.0 -> QEMU8.2 compatibility. We provide
backward compatibility where zero page checking is done from the
migration main thread.
Signed-off-by: Hao Xiang <hao.xiang@bytedance.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20240311180015.3359271-7-hao.xiang@linux.dev
Signed-off-by: Peter Xu <peterx@redhat.com>
1. Add zero_pages field in MultiFDPacket_t.
2. Implements the zero page detection and handling on the multifd
threads for non-compression, zlib and zstd compression backends.
3. Added a new value 'multifd' in ZeroPageDetection enumeration.
4. Adds zero page counters and updates multifd send/receive tracing
format to track the newly added counters.
Signed-off-by: Hao Xiang <hao.xiang@bytedance.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240311180015.3359271-5-hao.xiang@linux.dev
Signed-off-by: Peter Xu <peterx@redhat.com>
We currently only need to clear the mapped-ram file bitmap from the
migration thread during save_zero_page.
We're about to add support for zero page detection on the multifd
thread, so allow ramblock_set_file_bmap_atomic() to also clear the
bits.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240311180015.3359271-3-hao.xiang@linux.dev
Signed-off-by: Peter Xu <peterx@redhat.com>
Currently, it's an error to have no data pages in the multifd file
migration because zero page detection is done in the migration thread
and zero pages don't reach multifd. This is enforced with the
pages->num assert.
We're about to add zero page detection on the multifd thread. Fix the
file_write_ramblock_iov() to stop considering p->iovs_num=0 an error.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240311180015.3359271-2-hao.xiang@linux.dev
Signed-off-by: Peter Xu <peterx@redhat.com>
A small number of migration options are accessed by migration clients,
but to see them clients must include all of options.h, which is mostly
for migration core code. migrate_mode() in particular will be needed by
multiple clients.
Refactor the option declarations so clients can see the necessary few via
misc.h, which already exports a portion of the client API.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Link: https://lore.kernel.org/r/1710179319-294320-1-git-send-email-steven.sistare@oracle.com
Signed-off-by: Peter Xu <peterx@redhat.com>
qga-pull-2024-03-11-2
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEwsLBCepDxjwUI+uE711egWG6hOcFAmXvMF4ACgkQ711egWG6
# hOd7GQ/9H11bXH5U2HZHAyEv68rCuGxHt57yjy9GfrSGAE7kqkLJ0bHwxdgoj09A
# mmaTOakOEhM5tyrkFYsROde3ta0fAwdFQXyhqpWDHG0ZwDDCAlsNsEuDd541KXbg
# qFTue26BM4EJEwTYy94nEEhOHD+2GgEAuPIsUCF6QDhrq+sBqUts1pH3uUM+E3Sg
# 7HSXaF9O/RbgYR6J8FVA53tvNOP4WgOYZ/SZoFwKYzIOAblcaRgJvVbm600OqQDb
# DUZ96s6HUBVBazKx4t24WwPOkgcvYgp7b8QYj2VVfjRU2IHnFumv9A47KuEdJEUl
# meZlo8TsgfL+uSiYWiRvps1Eo1uoS2M4s4FYGbuOeABYviLr3XhJM7VarNyPp7nf
# lupuyeqydXCic5LFbjSg5gkpaIhFYQ9gANYr6JZjPPjX5G8hmgCeB6YsZT98Ygmi
# yG1np2luapvFGsDCPd8kgNpfTkKhOpKghUnTC3UESReV8mjBGhJHRQTd+lMV7YWJ
# reMRxlqrqNq69lDUnlNuSXOqPJX1qHHGkWuV9pdz641tFvw7vigE07qhvsCr8Y7b
# tAg6oDcw+1uuq2t3nHmfkzic6WTxb4lFmSpShsDu2sRA7MqWE3lCefNoS75R+xaI
# FebdrkjkFxdbazyl6oKXwxkOkAR7rFoTvVKKbG79DVMIBDiu4BE=
# =Xt/n
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 11 Mar 2024 16:25:02 GMT
# gpg: using RSA key C2C2C109EA43C63C1423EB84EF5D5E8161BA84E7
# gpg: Good signature from "Kostiantyn Kostiuk (Upstream PR sign) <kkostiuk@redhat.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: C2C2 C109 EA43 C63C 1423 EB84 EF5D 5E81 61BA 84E7
* tag 'qga-pull-2024-03-11-2' of https://github.com/kostyanf14/qemu:
qga-win: Add support of Windows Server 2025 in get-osinfo command
qga/commands-win32: Do not set matrix_lookup_t/win_10_0_t arrays size
qga/commands-win32: Declare const qualifier before type
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If the access is bigger than the MemoryRegion supports,
flatview_read/write_continue() will attempt to update the Memory Region.
but the address passed to flatview_translate() is relative to the cache, not
to the FlatView.
On arm/virt with interleaved CXL memory emulation and virtio-blk-pci this
lead to the first part of descriptor being read from the CXL memory and the
second part from PA 0x8 which happens to be a blank region
of a flash chip and all ffs on this particular configuration.
Note this test requires the out of tree ARM support for CXL, but
the problem is more general.
Avoid this by adding new address_space_read_continue_cached()
and address_space_write_continue_cached() which share all the logic
with the flatview versions except for the MemoryRegion lookup which
is unnecessary as the MemoryRegionCache only covers one MemoryRegion.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240307153710.30907-5-Jonathan.Cameron@huawei.com
Signed-off-by: Peter Xu <peterx@redhat.com>
The calls to flatview_read/write[_continue]() have parameters addr and
addr1 but the names give no indication of what they are addresses of.
Rename addr1 to mr_addr to reflect that it is the translated address
offset within the MemoryRegion returned by flatview_translate().
Similarly rename the parameter in address_space_read/write_cached_slow()
Suggested-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20240307153710.30907-2-Jonathan.Cameron@huawei.com
Signed-off-by: Peter Xu <peterx@redhat.com>
In commit 3fa9642ff7 change was made to convert the RDMA backend to
accept MigrateAddress struct. However, the assignment of "host" leads
to data corruption on the target host and the failure of migration.
isock->host = rdma->host;
By allocating the memory explicitly for it with g_strdup_printf(), the
issue is fixed and the migration doesn't fail any more.
Fixes: 3fa9642ff7 ("migration: convert rdma backend to accept MigrateAddress")
Cc: qemu-stable <qemu-stable@nongnu.org>
Cc: Li Zhijian <lizhijian@fujitsu.com>
Link: https://lore.kernel.org/r/CAHEcVy4L_D6tuhJ8h=xLR4WaPaprJE3nnxZAEyUnoTrxQ6CF5w@mail.gmail.com
Signed-off-by: Yu Zhang <yu.zhang@ionos.com>
[peterx: use g_strdup() instead of g_strdup_printf(), per Zhijian]
Signed-off-by: Peter Xu <peterx@redhat.com>
Commit bc38feddeb ("io: fsync before closing a file channel") added a
fsync/fdatasync at the closing point of the QIOChannelFile to ensure
integrity of the migration stream in case of QEMU crash.
The decision to do the sync at qio_channel_close() was not the best
since that function runs in the main thread and the fsync can cause
QEMU to hang for several minutes, depending on the migration size and
disk speed.
To fix the hang, remove the fsync from qio_channel_file_close().
At this moment, the migration code is the only user of the fsync and
we're taking the tradeoff of not having a sync at all, leaving the
responsibility to the upper layers.
Fixes: bc38feddeb ("io: fsync before closing a file channel")
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240305195629.9922-1-farosas@suse.de
Link: https://lore.kernel.org/r/20240305174332.2553-1-farosas@suse.de
[peterx: add more comment to the qio_channel_close()]
Signed-off-by: Peter Xu <peterx@redhat.com>
When commit bd2270608f ("migration/ram.c: add a notifier chain for
precopy") added PRECOPY_NOTIFY_SETUP notifiers at the end of
qemu_savevm_state_setup(), it didn't take into account a possible
error in the loop calling vmstate_save() or .save_setup() handlers.
Check ret value before calling the notifiers.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20240304122844.1888308-10-clg@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
VFIO migration buffer size is currently limited to 1MB. Therefore, there
is no need to check if migration rate exceeded, as in the worst case it
will exceed by only 1MB.
However, if the buffer size is later changed to a bigger value,
vfio_save_iterate() should enforce migration rate (similar to migration
RAM code).
Add a note about this in vfio_save_iterate() to serve as a reminder.
Suggested-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240304105339.20713-4-avihaih@nvidia.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Currently, vfio_save_state() returns 1 regardless of whether there is
more data to send or not. This was done to prevent a fast changing VFIO
device from potentially blocking other devices from sending their data,
as qemu_savevm_state_iterate() serialized devices.
Now that qemu_savevm_state_iterate() no longer serializes devices, there
is no need for that.
Refactor vfio_save_state() to return 0 if more data is available and 1
if no more data is available.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240304105339.20713-3-avihaih@nvidia.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Commit 90697be889 ("live migration: Serialize vmstate saving in stage
2") introduced device serialization in qemu_savevm_state_iterate(). The
rationale behind it was to first complete migration of slower changing
block devices and only then migrate the RAM, to avoid sending fast
changing RAM pages over and over.
This commit was added a long time ago, and while it was useful back
then, it is not the case anymore:
1. Block migration is deprecated, see commit 66db46ca83 ("migration:
Deprecate block migration").
2. Today there are other iterative devices besides RAM and block, such
as VFIO, which are registered for migration after RAM. With current
serialization behavior, a fast changing device can block other
devices from sending their data, which may prevent migration from
converging in some cases.
The issue described in item 2 was observed in several VFIO migration
scenarios with switchover-ack capability enabled, where some workload on
the VM prevented RAM from ever reaching a hard zero, thus blocking VFIO
initial pre-copy data from being sent. Hence, destination could not ack
switchover and migration could not converge.
Fix that by not serializing iterative devices in
qemu_savevm_state_iterate().
Note that this still doesn't fully prevent device starvation. As
correctly pointed out by Peter [1], a fast changing device might
constantly consume all allocated bandwidth and block the following
devices. However, this scenario is more likely to happen only if
max-bandwidth is low.
[1] https://lore.kernel.org/qemu-devel/Zd6iw9dBhW6wKNxx@x1n/
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240304105339.20713-2-avihaih@nvidia.com
Signed-off-by: Peter Xu <peterx@redhat.com>
