This change adds support for horizontal scroll to ps/2 mouse device
code. The code is implemented to match the logic of linux kernel
which is used as a reference.
Signed-off-by: Dmitry Petrov <dpetroff@gmail.com>
Message-Id: <20220108153947.171861-2-dpetroff@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Previously, the large modes (>1080p) that were generated by Qemu in its EDID
were all 50 Hz. If we provide them to a Guest OS and the user selects
one of these modes, then the OS by default only gets 50 FPS. This is
especially true for Windows OS. With this patch, we are now exposing a
3840x2160@60 Hz which will allow the guest OS to get 60 FPS.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Satyeshwar Singh <satyeshwar.singh@intel.com>
Message-Id: <20211116221103.27128-1-dongwon.kim@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently QEMU defaults to a resolution of 1024x768 when exposing EDID
info to the guest OS. The EDID default info is important as this will
influence what resolution many guest OS will configure the screen with
on boot. It can also potentially influence what resolution the firmware
will configure the screen with, though until very recently EDK2 would
not handle EDID info.
One important thing to bear in mind is that the default graphics card
driver provided by Windows will leave the display set to whatever
resolution was enabled by the firmware on boot. Even if sufficient
VRAM is available, the resolution can't be changed without installing
new drivers. IOW, the default resolution choice is quite important
for usability of Windows.
Modern real world monitor hardware for desktop/laptop has supported
resolutions higher than 1024x768 for a long time now, perhaps as long
as 15+ years. There are quite a wide variety of native resolutions in
use today, however, and in wide screen form factors the height may not
be all that tall.
None the less, it is considered that there is scope for making the
QEMU default resolution slightly larger.
In considering what possible new default could be suitable, choices
considered were 1280x720 (720p), 1280x800 (WXGA) and 1280x1024 (SXGA).
In many ways, vertical space is the most important, and so 720p was
discarded due to loosing vertical space, despite being 25% wider.
The SXGA resolution would be good, but when taking into account
window titlebars/toolbars and window manager desktop UI, this might
be a little too tall for some users to fit the guest on their physical
montior.
This patch thus suggests a modest change to 1280x800 (WXGA). This
only consumes 1 MB per colour channel, allowing double buffered
framebuffer in 8 MB of VRAM. Width wise this is 25% larger than
QEMU's current default, but height wise this only adds 5%, so the
difference isn't massive on the QEMU side.
Overall there doesn't appear to be a compelling reason to stick
with 1024x768 resolution.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20211129140508.1745130-1-berrange@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Introduce TYPE_VGA_MMIO, a sysbus device.
While there is no change in the vga_mmio_init()
interface, this is a migration compatibility break
of the MIPS Acer Pica 61 Jazz machine (pica61).
Suggested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20211206224528.563588-4-f4bug@amsat.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
There is no ISA bus part in the MMIO VGA device, so rename:
* hw/display/vga-isa-mm.c -> hw/display/vga-mmio.c
* CONFIG_VGA_ISA_MM -> CONFIG_VGA_MMIO
* ISAVGAMMState -> VGAMmioState
* isa_vga_mm_init() -> vga_mmio_init()
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211206224528.563588-2-f4bug@amsat.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When closing the QEMU Gtk display window, it can occasionaly warn:
qemu-system-x86_64: Gtk: gtk_clipboard_set_with_data: assertion 'targets != NULL' failed
#3 0x00007ffff4f02f22 in gtk_clipboard_set_with_data (clipboard=<optimized out>, targets=<optimized out>, n_targets=<optimized out>, get_func=<optimized out>, clear_func=<optimized out>, user_data=<optimized out>) at /usr/src/debug/gtk3-3.24.30-4.fc35.x86_64/gtk/gtkclipboard.c:672
#4 0x00007ffff552cd75 in gd_clipboard_update_info (gd=0x5555579a9e00, info=0x555557ba4b50) at ../ui/gtk-clipboard.c:98
#5 0x00007ffff552ce00 in gd_clipboard_notify (notifier=0x5555579aaba8, data=0x7fffffffd720) at ../ui/gtk-clipboard.c:128
#6 0x000055555603e0ff in notifier_list_notify (list=0x555556657470 <clipboard_notifiers>, data=0x7fffffffd720) at ../util/notify.c:39
#7 0x000055555594e8e0 in qemu_clipboard_update (info=0x555557ba4b50) at ../ui/clipboard.c:54
#8 0x000055555594e840 in qemu_clipboard_peer_release (peer=0x55555684a5b0, selection=QEMU_CLIPBOARD_SELECTION_PRIMARY) at ../ui/clipboard.c:40
#9 0x000055555594e786 in qemu_clipboard_peer_unregister (peer=0x55555684a5b0) at ../ui/clipboard.c:19
#10 0x000055555595f044 in vdagent_disconnect (vd=0x55555684a400) at ../ui/vdagent.c:852
#11 0x000055555595f262 in vdagent_chr_fini (obj=0x55555684a400) at ../ui/vdagent.c:908
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20211216083233.1166504-1-marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
On the last added dbus patch, I left a tiny BO:
==441487==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x611000025a70 at pc 0x7f0817bb764c bp 0x7ffde672ae60 sp 0x7ffde672ae58
WRITE of size 8 at 0x611000025a70 thread T0
#0 0x7f0817bb764b in dbus_vc_class_init ../ui/dbus.c:401
A cookie for ASAN! not you C :)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Fixes: 7f767ca35e ("ui/dbus: register D-Bus VC handler")
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211222144032.443424-1-marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Quote from:
High Definition Audio Specification 1.0a, section 3.3.35
Offset 80: {IOB}SDnCTL Stream Reset (SRST): Writing a 1 causes
the corresponding stream to be reset. The Stream Descriptor
registers (except the SRST bit itself) ... are reset.
Change the code to reset the Stream Descriptor Control and Status
registers except the SRST bit.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/757
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20211226154017.6067-3-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Audio recordings with the DirectSound backend don't sound right.
A look a the Microsoft online documentation tells us why.
From the DirectSound Programming Guide, Capture Buffer Information:
'You can safely copy data from the buffer only up to the read
cursor.'
Change the code to read up to the read cursor instead of the
capture cursor.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20211226154017.6067-2-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
On Windows the jack_set_thread_creator() function and on MacOS the
pthread_setname_np() function with a thread pointer paramater is
not available. Use #ifdefs to remove the jack_set_thread_creator()
function call and the qjack_thread_creator() function in both
cases.
The qjack_thread_creator() function just sets the name of the
created thread for debugging purposes and isn't really necessary.
From the jack_set_thread_creator() documentation:
(...)
No normal application/client should consider calling this. (...)
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/785
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <20211226154017.6067-1-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The GDB statck is as follows:
(gdb) bt
0 __lll_lock_wait (futex=futex@entry=0x56211df20360, private=0) at lowlevellock.c:52
1 0x00007f263caf20a3 in __GI___pthread_mutex_lock (mutex=0x56211df20360) at ../nptl/pthread_mutex_lock.c:80
2 0x000056211a757364 in qemu_mutex_lock_impl (mutex=0x56211df20360, file=0x56211a804857 "../ui/vnc-jobs.h", line=60)
at ../util/qemu-thread-posix.c:80
3 0x000056211a0ef8c7 in vnc_lock_output (vs=0x56211df14200) at ../ui/vnc-jobs.h:60
4 0x000056211a0efcb7 in vnc_clipboard_send (vs=0x56211df14200, count=1, dwords=0x7ffdf1701338) at ../ui/vnc-clipboard.c:138
5 0x000056211a0f0129 in vnc_clipboard_notify (notifier=0x56211df244c8, data=0x56211dd1bbf0) at ../ui/vnc-clipboard.c:209
6 0x000056211a75dde8 in notifier_list_notify (list=0x56211afa17d0 <clipboard_notifiers>, data=0x56211dd1bbf0) at ../util/notify.c:39
7 0x000056211a0bf0e6 in qemu_clipboard_update (info=0x56211dd1bbf0) at ../ui/clipboard.c:50
8 0x000056211a0bf05d in qemu_clipboard_peer_release (peer=0x56211df244c0, selection=QEMU_CLIPBOARD_SELECTION_CLIPBOARD)
at ../ui/clipboard.c:41
9 0x000056211a0bef9b in qemu_clipboard_peer_unregister (peer=0x56211df244c0) at ../ui/clipboard.c:19
10 0x000056211a0d45f3 in vnc_disconnect_finish (vs=0x56211df14200) at ../ui/vnc.c:1358
11 0x000056211a0d4c9d in vnc_client_read (vs=0x56211df14200) at ../ui/vnc.c:1611
12 0x000056211a0d4df8 in vnc_client_io (ioc=0x56211ce70690, condition=G_IO_IN, opaque=0x56211df14200) at ../ui/vnc.c:1649
13 0x000056211a5b976c in qio_channel_fd_source_dispatch
(source=0x56211ce50a00, callback=0x56211a0d4d71 <vnc_client_io>, user_data=0x56211df14200) at ../io/channel-watch.c:84
14 0x00007f263ccede8e in g_main_context_dispatch () at /lib/x86_64-linux-gnu/libglib-2.0.so.0
15 0x000056211a77d4a1 in glib_pollfds_poll () at ../util/main-loop.c:232
16 0x000056211a77d51f in os_host_main_loop_wait (timeout=958545) at ../util/main-loop.c:255
17 0x000056211a77d630 in main_loop_wait (nonblocking=0) at ../util/main-loop.c:531
18 0x000056211a45bc8e in qemu_main_loop () at ../softmmu/runstate.c:726
19 0x000056211a0b45fa in main (argc=69, argv=0x7ffdf1701778, envp=0x7ffdf17019a8) at ../softmmu/main.c:50
From the call trace, we can see it is a deadlock bug.
vnc_disconnect_finish will acquire the output_mutex.
But, the output_mutex will be acquired again in vnc_clipboard_send.
Repeated locking will cause deadlock. So, I move
qemu_clipboard_peer_unregister() behind vnc_unlock_output();
Fixes: 0bf41cab93 ("ui/vnc: clipboard support")
Signed-off-by: Lei Rao <lei.rao@intel.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220105020808.597325-1-lei.rao@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
A device of USB video class usually uses larger desc structure, so
use larger buffer to avoid failure. (dev-video.c is ready)
This is an unlikely code path:
1, during guest startup, guest tries to probe device.
2, run 'lsusb' command in guest(or other similar commands).
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20220112015835.900619-1-pizhenwei@bytedance.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The clang in Ubuntu 18.04 (10.0.0-4ubuntu1) produces a warning
on the code added in commit f5ef0e518d where we use a
shifted expression in a boolean context:
../../linux-user/elfload.c:2423:16: error: converting the result of '<<' to a boolean always evaluates to true [-Werror,-Wtautological-constant-compare]
} else if (LO_COMMPAGE) {
^
../../linux-user/elfload.c:1102:22: note: expanded from macro 'LO_COMMPAGE'
#define LO_COMMPAGE TARGET_PAGE_SIZE
^
/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/include/exec/cpu-all.h:231:31: note: expanded from macro 'TARGET_PAGE_SIZE'
#define TARGET_PAGE_SIZE (1 << TARGET_PAGE_BITS)
^
1 error generated.
The warning is bogus because whether LO_COMMPAGE is zero or not
depends on compile-time ifdefs; shut the compiler up by adding
an explicit comparison to zero.
Fixes: f5ef0e518d ("linux-user/nios2: Map a real kuser page")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 20220111082900.3341274-1-peter.maydell@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Simplify cpu_loop by doing all of the decode in translate.
This fixes a bug in that cpu_loop was not handling the
different layout of the R6 version of break16. This fixes
a bug in that cpu_loop extracted the wrong bits for the
mips16e break16 instruction.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-17-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Rename to do_tr_or_bp, as per the kernel function.
Add a 'trap' argument, akin to the kernel's si_code, but clearer.
The return value is always 0, so change the return value to void.
Use force_sig and force_sig_fault.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-15-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
