Commit 71e6fae3a9 fixed an issue with FORM2 affinity guests with NUMA
nodes in which the distance info is absent in
machine_state->numa_state->nodes. This happens when QEMU adds a default
NUMA node and when the user adds NUMA nodes without specifying the
distances.
During the discussions of the forementioned patch [1] it was found that
FORM1 guests were behaving in a strange way in the same scenario, with
the kernel seeing the distances between the nodes as '160', as we can
see in this example with 4 NUMA nodes without distance information:
$ numactl -H
available: 4 nodes (0-3)
(...)
node distances:
node 0 1 2 3
0: 10 160 160 160
1: 160 10 160 160
2: 160 160 10 160
3: 160 160 160 10
Turns out that we have the same problem with FORM1 guests - we are
calculating associativity domain using zeroed values. And as it also
turns out, the solution from 71e6fae3a9 applies to FORM1 as well.
This patch creates a wrapper called 'get_numa_distance' that contains
the logic used in FORM2 to define node distances when this information
is absent. This helper is then used in all places where we need to read
distance information from machine_state->numa_state->nodes. That way
we'll guarantee that the NUMA node distance is always being curated
before being used.
After this patch, the FORM1 guest mentioned above will have the
following topology:
$ numactl -H
available: 4 nodes (0-3)
(...)
node distances:
node 0 1 2 3
0: 10 20 20 20
1: 20 10 20 20
2: 20 20 10 20
3: 20 20 20 10
This is compatible with what FORM2 guests and other archs do in this
case.
[1] https://lists.gnu.org/archive/html/qemu-devel/2021-11/msg01960.html
Fixes: 690fbe4295 ("spapr_numa: consider user input when defining associativity")
CC: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
CC: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
These instructions should update the GPR indicated by the field RA
instead of RT. This error caused a regression on Mac OS 9 boot and some
graphical glitches in OS X.
Fixes: a39a106634a9 ("target/ppc: Move load and store floating point instructions to decodetree")
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
virtio-net-test has an hotplug testcase that is never executed.
This is because the testcase is attached to virtio-pci interface
rather than to virtio-net-pci.
$ QTEST_QEMU_BINARY=./qemu-system-x86_64 tests/qtest/qos-test -l | grep hotplug
/x86_64/.../pci-ohci-tests/ohci_pci-test-hotplug
/x86_64/.../e1000e/e1000e-tests/hotplug
/x86_64/.../virtio-blk-pci/virtio-blk-pci-tests/hotplug
/x86_64/.../vhost-user-blk-pci/vhost-user-blk-pci-tests/hotplug
/x86_64/.../virtio-rng-pci/virtio-rng-pci-tests/hotplug
/x86_64/.../virtio-scsi/virtio-scsi-tests/hotplug
/x86_64/.../virtio-serial/virtio-serial-tests/hotplug
With this fix:
$ QTEST_QEMU_BINARY=./qemu-system-x86_64 tests/qtest/qos-test -l | grep hotplug
...
/x86_64/.../vhost-user-blk-pci/vhost-user-blk-pci-tests/hotplug
/x86_64/.../virtio-net-pci/virtio-net-pci-tests/hotplug
/x86_64/.../virtio-rng-pci/virtio-rng-pci-tests/hotplug
...
$ QTEST_QEMU_BINARY=./qemu-system-x86_64 tests/qtest/qos-test -p /x86_64/.../virtio-net-pci-tests/hotplug
/x86_64/pc/i440FX-pcihost/pci-bus-pc/pci-bus/virtio-net-pci/virtio-net-pci-tests/hotplug: OK
Fixes: 6ae333f91b ("qos-test: virtio-net test node")
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20211028173014.139692-1-lvivier@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Migration Pull request
Hi
This pull request includes:
- fix sample-pages doc by hyman
- cleanup colo pages by contiguous blocks by Rao
- reset auto-converge by checkpoint by Rao.
Please, apply.
# gpg: Signature made Tue 09 Nov 2021 09:02:37 AM CET
# gpg: using RSA key 1899FF8EDEBF58CCEE034B82F487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>" [full]
# gpg: aka "Juan Quintela <quintela@trasno.org>" [full]
* remotes/juanquintela/tags/migration-20211109-pull-request:
Reset the auto-converge counter at every checkpoint.
Reduce the PVM stop time during Checkpoint
docs: fix 'sample-pages' option tag
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
if we don't reset the auto-converge counter,
it will continue to run with COLO running,
and eventually the system will hang due to the
CPU throttle reaching DEFAULT_MIGRATE_MAX_CPU_THROTTLE.
Signed-off-by: Lei Rao <lei.rao@intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Lukas Straub <lukasstraub2@web.de>
Tested-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
When flushing memory from ram cache to ram during every checkpoint
on secondary VM, we can copy continuous chunks of memory instead of
4096 bytes per time to reduce the time of VM stop during checkpoint.
Signed-off-by: Lei Rao <lei.rao@intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Tested-by: Lukas Straub <lukasstraub2@web.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
ppc patch queue for 2021-11-09
Here's the latest set of ppc related patches for qemu-6.2, which I
hope will squeeze in just barely before the hard freeze.
This set includes a change to MAINTAINERS moving maintainership of ppc
from myself and Greg Kurz to Cédric le Goater and Daniel Henrique
Barboza. So, I expect this to be my last pull request as ppc
maintainer. It's been great, but it's time I moved onto other things.
Apart from that, this patchset is mostly a lot of updates to TCG
implementations of ISA 3.1 (POWER10) instructions from the El Dorado
team. There are also a handful of other fixes.
# gpg: Signature made Tue 09 Nov 2021 05:14:33 AM CET
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
* remotes/dgibson/tags/ppc-for-6.2-20211109: (54 commits)
spapr_numa.c: FORM2 table handle nodes with no distance info
target/ppc, hw/ppc: Change maintainers
target/ppc: cntlzdm/cnttzdm implementation without brcond
target/ppc: Implement lxvkq instruction
target/ppc: Implement xxblendvb/xxblendvh/xxblendvw/xxblendvd instructions
target/ppc: implemented XXSPLTIDP instruction
target/ppc: Implemented XXSPLTIW using decodetree
target/ppc: implemented XXSPLTI32DX
target/ppc: moved XXSPLTIB to using decodetree
target/ppc: moved XXSPLTW to using decodetree
target/ppc: added the instructions PLXVP and PSTXVP
target/ppc: added the instructions PLXV and PSTXV
target/ppc: added the instructions LXVPX and STXVPX
target/ppc: added the instructions LXVP and STXVP
target/ppc: moved stxvx and lxvx from legacy to decodtree
target/ppc: moved stxv and lxv from legacy to decodtree
target/ppc: receive high/low as argument in get/set_cpu_vsr
target/ppc: Introduce REQUIRE_VSX macro
target/ppc: Implement Vector Extract Double to VSR using GPR index insns
target/ppc: Move vinsertb/vinserth/vinsertw/vinsertd to decodetree
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
A configuration that specifies multiple nodes without distance info
results in the non-local points in the FORM2 matrix having a distance of
0. This causes Linux to complain "Invalid distance value range" because
a node distance is smaller than the local distance.
Fix this by building a simple local / remote fallback for points where
distance information is missing.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20211105135137.1584840-1-npiggin@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
As our day jobs and interests have moved onto other things, Greg and I have
been struggling to keep on top of maintainership of target/ppc and
associated pieces like the pseries and powernv machine types, with their
platform specific devices.
We've therefore discussed and plan to transfer maintainership to Cédric Le
Goater (primary) and Daniel Henrique Barboza (backup). Cédric and Daniel
have been actively contributing to the area for some time, and they're
supported in this by their current employer, IBM, who has an obvious
interest in the platform.
Greg and I do plan to stay around in some capacity for at least the next
6 months, providing reviews and advice to assist the new maintainers into
the role.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Acked-by: Cédric Le Goater <clg@kaod.org>
Implement the following PowerISA v3.1 instructions:
vextdubvlx: Vector Extract Double Unsigned Byte to VSR using
GPR-specified Left-Index
vextduhvlx: Vector Extract Double Unsigned Halfword to VSR using
GPR-specified Left-Index
vextduwvlx: Vector Extract Double Unsigned Word to VSR using
GPR-specified Left-Index
vextddvlx: Vector Extract Double Doubleword to VSR using
GPR-specified Left-Index
vextdubvrx: Vector Extract Double Unsigned Byte to VSR using
GPR-specified Right-Index
vextduhvrx: Vector Extract Double Unsigned Halfword to VSR using
GPR-specified Right-Index
vextduwvrx: Vector Extract Double Unsigned Word to VSR using
GPR-specified Right-Index
vextddvrx: Vector Extract Double Doubleword to VSR using
GPR-specified Right-Index
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20211104123719.323713-10-matheus.ferst@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Implements the following PowerISA v3.1 instructions:
vinsbvlx: Vector Insert Byte from VSR using GPR-specified Left-Index
vinshvlx: Vector Insert Halfword from VSR using GPR-specified
Left-Index
vinswvlx: Vector Insert Word from VSR using GPR-specified Left-Index
vinsbvrx: Vector Insert Byte from VSR using GPR-specified Right-Index
vinshvrx: Vector Insert Halfword from VSR using GPR-specified
Right-Index
vinswvrx: Vector Insert Word from VSR using GPR-specified Right-Index
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20211104123719.323713-8-matheus.ferst@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Implements the following PowerISA v3.1 instructions:
vinsblx: Vector Insert Byte from GPR using GPR-specified Left-Index
vinshlx: Vector Insert Halfword from GPR using GPR-specified Left-Index
vinswlx: Vector Insert Word from GPR using GPR-specified Left-Index
vinsdlx: Vector Insert Doubleword from GPR using GPR-specified
Left-Index
vinsbrx: Vector Insert Byte from GPR using GPR-specified Right-Index
vinshrx: Vector Insert Halfword from GPR using GPR-specified
Right-Index
vinswrx: Vector Insert Word from GPR using GPR-specified Right-Index
vinsdrx: Vector Insert Doubleword from GPR using GPR-specified
Right-Index
The helpers and do_vinsx receive i64 to allow code sharing with the
future implementation of Vector Insert from VSR using GPR Index.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20211104123719.323713-6-matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Test is wrong and the backend can never updated. It could have led to
a QEMU crash but since the firmware deactivates flash access if a valid
layout is not detected, it went unnoticed.
Reported-by: Coverity CID 1465223
Fixes: 35dde57662 ("ppc/pnv: Add a PNOR model")
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20211102162905.762078-1-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Move the following instructions to decodetree:
ddedpd: DFP Decode DPD To BCD
ddedpdq: DFP Decode DPD To BCD Quad
denbcd: DFP Encode BCD To DPD
denbcdq: DFP Encode BCD To DPD Quad
dscli: DFP Shift Significand Left Immediate
dscliq: DFP Shift Significand Left Immediate Quad
dscri: DFP Shift Significand Right Immediate
dscriq: DFP Shift Significand Right Immediate Quad
Also deleted dfp-ops.c.inc, now that all PPC DFP instructions were
moved to decodetree.
Signed-off-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211029192417.400707-16-luis.pires@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
