Commit 31d2dda ("build-system: remove per-test GCOV reporting", 2018-06-20)
removed users of the variables, since those uses can be replaced by a simple
overall report produced by gcovr. However, the variables were never removed.
Do it now.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[thuth: Fixed up contextual conflicts with the patch from Eric]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Block layer patches:
- qcow2 cache option default changes (Linux: 32 MB maximum, limited by
whatever cache size can be made use of with the specific image;
default cache-clean-interval of 10 minutes)
- reopen: Allow specifying unchanged child node references, and changing
a few generic options (discard, detect-zeroes)
- Fix werror/rerror defaults for -device drive=<node-name>
- Test case fixes
# gpg: Signature made Mon 01 Oct 2018 18:17:35 BST
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (23 commits)
tests/test-bdrv-drain: Fix too late qemu_event_reset()
test-replication: Lock AioContext around blk_unref()
qcow2: Fix cache-clean-interval documentation
block-backend: Set werror/rerror defaults in blk_new()
qcow2: Explicit number replaced by a constant
qcow2: Set the default cache-clean-interval to 10 minutes
qcow2: Resize the cache upon image resizing
qcow2: Increase the default upper limit on the L2 cache size
qcow2: Assign the L2 cache relatively to the image size
qcow2: Avoid duplication in setting the refcount cache size
qcow2: Make sizes more humanly readable
include: Add a lookup table of sizes
qcow2: Options' documentation fixes
block: Allow changing 'detect-zeroes' on reopen
block: Allow changing 'discard' on reopen
file-posix: Forbid trying to change unsupported options during reopen
block: Forbid trying to change unsupported options during reopen
block: Allow child references on reopen
block: Don't look for child references in append_open_options()
block: Remove child references from bs->{options,explicit_options}
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fixing cache-clean-interval documentation following the recent change to
a default of 600 seconds on supported plarforms (only Linux currently).
Signed-off-by: Leonid Bloch <lbloch@janustech.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The default cache-clean-interval is set to 10 minutes, in order to lower
the overhead of the qcow2 caches (before the default was 0, i.e.
disabled).
* For non-Linux platforms the default is kept at 0, because
cache-clean-interval is not supported there yet.
Signed-off-by: Leonid Bloch <lbloch@janustech.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The upper limit on the L2 cache size is increased from 1 MB to 32 MB
on Linux platforms, and to 8 MB on other platforms (this difference is
caused by the ability to set intervals for cache cleaning on Linux
platforms only).
This is done in order to allow default full coverage with the L2 cache
for images of up to 256 GB in size (was 8 GB). Note, that only the
needed amount to cover the full image is allocated. The value which is
changed here is just the upper limit on the L2 cache size, beyond which
it will not grow, even if the size of the image will require it to.
Signed-off-by: Leonid Bloch <lbloch@janustech.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Sufficient L2 cache can noticeably improve the performance when using
large images with frequent I/O.
Previously, unless 'cache-size' was specified and was large enough, the
L2 cache was set to a certain size without taking the virtual image size
into account.
Now, the L2 cache assignment is aware of the virtual size of the image,
and will cover the entire image, unless the cache size needed for that is
larger than a certain maximum. This maximum is set to 1 MB by default
(enough to cover an 8 GB image with the default cluster size) but can
be increased or decreased using the 'l2-cache-size' option. This option
was previously documented as the *maximum* L2 cache size, and this patch
makes it behave as such, instead of as a constant size. Also, the
existing option 'cache-size' can limit the sum of both L2 and refcount
caches, as previously.
Signed-off-by: Leonid Bloch <lbloch@janustech.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds edid support to the qemu stdvga. It is turned off by
default and can be enabled with the new edid property. The patch also
adds xres and yres properties to specify the video mode you want the
guest use. Works only with edid enabled and updated guest driver.
The mmio bar of the stdvga has some unused address space at the start.
It was reserved just in case it'll be needed for virtio, but it turned
out to not be needed for that. So let's use that region to place the
EDID data block there.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180925075646.25114-6-kraxel@redhat.com
It's the same as -no-user-config and marked as deprecated since three
releases already. Time to remove it now.
Acked-by: Peter Krempa <pkrempa@redhat.com>
Acked-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We consciously chose in commit 1a9a507b to hide QAPI type names
from the introspection output on the wire, but added a command
line option -u to unmask the type name when doing a debug build.
The unmask option still remains useful to some other forms of
automated analysis, so it will not be removed; however, when it
is not in use, the generated .c file can be hard to read. At
the time when we first introduced masking, the generated file
consisted only of a monolithic C string, so there was no clean
way to inject any comments.
Later, in commit 7d0f982b, we switched the generation to output
a QLit object, in part to make it easier for future addition of
conditional compilation. In fact, commit d626b6c1 took advantage
of this by passing a tuple instead of a bare object for encoding
the output of conditionals. By extending that tuple, we can now
interject strategic comments.
For now, type name debug aid comments are only output once per
meta-type, rather than at all uses of the number used to encode
the type within the introspection data. But this is still a lot
more convenient than having to regenerate the file with the
unmask operation temporarily turned on - merely search the
generated file for '"NNN" =' to learn the corresponding source
name and associated definition of type NNN.
The generated qapi-introspect.c changes only with the addition
of comments, such as:
| @@ -14755,6 +15240,7 @@
| { "name", QLIT_QSTR("[485]"), },
| {}
| })),
| + /* "485" = QCryptoBlockInfoLUKSSlot */
| QLIT_QDICT(((QLitDictEntry[]) {
| { "members", QLIT_QLIST(((QLitObject[]) {
| QLIT_QDICT(((QLitDictEntry[]) {
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180827213943.33524-3-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Rebased, update to qapi-code-gen.txt corrected]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The generated qapi_event_send_FOO() take an Error ** argument. They
can't actually fail, because all they do with the argument is passing it
to functions that can't fail: the QObject output visitor, and the
@qmp_emit callback, which is either monitor_qapi_event_queue() or
event_test_emit().
Drop the argument, and pass &error_abort to the QObject output visitor
and @qmp_emit instead.
Suggested-by: Eric Blake <eblake@redhat.com>
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180815133747.25032-4-peterx@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message rewritten, update to qapi-code-gen.txt corrected]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
QObject patches for 2018-08-24
# gpg: Signature made Fri 24 Aug 2018 20:28:53 BST
# gpg: using RSA key 3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-qobject-2018-08-24: (58 commits)
json: Update references to RFC 7159 to RFC 8259
json: Support %% in JSON strings when interpolating
json: Improve safety of qobject_from_jsonf_nofail() & friends
json: Keep interpolation state in JSONParserContext
tests/drive_del-test: Fix harmless JSON interpolation bug
json: Clean up headers
qobject: Drop superfluous includes of qemu-common.h
json: Make JSONToken opaque outside json-parser.c
json: Unbox tokens queue in JSONMessageParser
json: Streamline json_message_process_token()
json: Enforce token count and size limits more tightly
qjson: Have qobject_from_json() & friends reject empty and blank
json: Assert json_parser_parse() consumes all tokens on success
json: Fix streamer not to ignore trailing unterminated structures
json: Fix latent parser aborts at end of input
qjson: Fix qobject_from_json() & friends for multiple values
json: Improve names of lexer states related to numbers
json: Replace %I64d, %I64u by %PRId64, %PRIu64
json: Leave rejecting invalid interpolation to parser
json: Pass lexical errors and limit violations to callback
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Section "QGA Synchronization" specifies that sending "a raw 0xFF
sentinel byte" makes the server "reset its state and discard all
pending data prior to the sentinel." What actually happens there is a
lexical error, which will produce one or more error responses.
Moreover, it's not specific to QGA.
Create new section "Forcing the JSON parser into known-good state" to
document the technique properly. Rewrite section "QGA
Synchronization" to document just the other direction, i.e. command
guest-sync-delimited.
Section "Protocol Specification" mentions "synchronization bytes
(documented below)". Delete that.
While there, fix it not to claim '"Server" is QEMU itself', but
'"Server" is either QEMU or the QEMU Guest Agent'.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-2-armbru@redhat.com>
migration/next for 20180822
# gpg: Signature made Wed 22 Aug 2018 12:07:59 BST
# gpg: using RSA key F487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>"
# gpg: aka "Juan Quintela <quintela@trasno.org>"
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723
* remotes/juanquintela/tags/migration/20180822-1:
migration: hold the lock only if it is really needed
migration: move handle of zero page to the thread
migration: drop the return value of do_compress_ram_page
migration: introduce save_zero_page_to_file
migration: fix counting normal page for compression
migration: do not wait for free thread
migration: poll the cm event for destination qemu
tests/migration-test: Silence the kvm_hv message by default
migration: implement the shutdown for RDMA QIOChannel
migration: poll the cm event while wait RDMA work request completion
migration: invoke qio_channel_yield only when qemu_in_coroutine()
migration: implement io_set_aio_fd_handler function for RDMA QIOChannel
migration: Stop rdma yielding during incoming postcopy
migration: implement bi-directional RDMA QIOChannel
migration: create a dedicated connection for rdma return path
migration: disable RDMA WRITE after postcopy started
migrate/cpu-throttle: Add max-cpu-throttle migration parameter
docs/migration: Clarify pre_load in subsections
migration: Correctly handle subsections with no 'needed' function
qapi/migration.json: fix the description for "query-migrate" output
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Clarify that the pre_load function in a subsection is only called if
the subsection is found; to handle a missing subsection you may
set values in the pre_load of the parent vmsd.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
pc: fixes
This includes nvdimm persistence fixes queued before the release.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 20 Aug 2018 11:38:11 BST
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
migration/ram: ensure write persistence on loading all data to PMEM.
migration/ram: Add check and info message to nvdimm post copy.
mem/nvdimm: ensure write persistence to PMEM in label emulation
hostmem-file: add the 'pmem' option
configure: add libpmem support
memory, exec: switch file ram allocation functions to 'flags' parameters
memory, exec: Expose all memory block related flags.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With the recent set of CPU hardware vulnerabilities on x86, it is
increasingly difficult to understand which CPU configurations are
good to use and what flaws they might be vulnerable to.
This doc attempts to help management applications and administrators in
picking sensible CPU configuration on x86 hosts. It outlines which of
the named CPU models are good choices, and describes which extra CPU
flags should be enabled to allow the guest to mitigate hardware flaws.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20180627160103.13634-1-berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Invoking 'make vm-build-freebsd' and friends with V=1 should
propagate that verbosity setting down into the build run
inside the VM. Make sure we do that. This brings it into
line with how the container tests handle V=1.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180803085230.30574-4-peter.maydell@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
When QEMU emulates vNVDIMM labels and migrates vNVDIMM devices, it
needs to know whether the backend storage is a real persistent memory,
in order to decide whether special operations should be performed to
ensure the data persistence.
This boolean option 'pmem' allows users to specify whether the backend
storage of memory-backend-file is a real persistent memory. If
'pmem=on', QEMU will set the flag RAM_PMEM in the RAM block of the
corresponding memory region. If 'pmem' is set while lack of libpmem
support, a error is generated.
Signed-off-by: Junyan He <junyan.he@intel.com>
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This will build a coverage report under the current directory in
reports/coverage. At the users option a report can be generated by
directly invoking something like:
make foo/bar/coverage-report.html
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This can be used to remove any stale coverage data before any
particular test run. This is useful for analysing individual tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>---
I'm not entirely sure who's using this information and certainly in a
CI environment it just washes over as additional noise. Later patches
will provide new reporting options so a user who wants to analyse
individual tests will be able to use that to get the information.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Commit cf869d5317 "qmp: support out-of-band (oob) execution" added a
general mechanism for command-independent arguments just for an
out-of-band flag:
The "control" key is introduced to store this extra flag. "control"
field is used to store arguments that are shared by all the commands,
rather than command specific arguments. Let "run-oob" be the first.
However, it failed to reject unknown members of "control". For
instance, in QMP command
{"execute": "query-name", "id": 42, "control": {"crap": true}}
"crap" gets silently ignored.
Instead of fixing this, revert the general "control" mechanism
(because YAGNI), and do it the way I initially proposed, with key
"exec-oob". Simpler code, simpler interface.
An out-of-band command
{"execute": "migrate-pause", "id": 42, "control": {"run-oob": true}}
becomes
{"exec-oob": "migrate-pause", "id": 42}
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-13-armbru@redhat.com>
[Commit message typo fixed]
Commit cf869d5317 "qmp: support out-of-band (oob) execution" made
"id" mandatory for all commands when the client accepted capability
"oob". This is rather onerous when you play with QMP by hand, and
unnecessarily so: only out-of-band commands need an ID for reliable
matching of response to command.
Revert that part of commit cf869d5317 for now, but have documentation
advise on the need to use "id" with out-of-band commands.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180703085358.13941-8-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
OOB documentation is spread over qmp-spec.txt sections 2.2.1
Capabilities and 2.3 Issuing Commands. The amount of detail is a bit
distracting there. Move the meat of the matter to new section 2.3.1
Out of band execution.
Throw in a few other improvements while there:
* 2.2 Server Greeting: Drop advice to search entire capabilities
array; should be obvious.
* 3. QMP Examples
- 3.1 Server Greeting: Update greeting to the one we expect for the
release. Now shows capability "oob". Update qmp-intro.txt
likewise.
- 3.2 Capabilities negotiation: Show client accepting capability
"oob".
- 3.7 Out-of-band execution: New.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-4-armbru@redhat.com>
[Whitespace tidied up]
Accept 'if' key in top-level elements, accepted as string or list of
string type. The following patches will modify the test visitor to
check the value is correctly saved, and generate #if/#endif code (as a
single #if/endif line or a series for a list).
Example of 'if' key:
{ 'struct': 'TestIfStruct', 'data': { 'foo': 'int' },
'if': 'defined(TEST_IF_STRUCT)' }
The generated code is for now *unconditional*. Later patches generate
the conditionals.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180703155648.11933-2-marcandre.lureau@redhat.com>
[Commit message and Documentation improved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Out-Of-Band handlers need to protect shared state if there is any.
Mention it in the document. Meanwhile, touch up some other places too,
either with better English, or reordering of bullets.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180620073223.31964-6-peterx@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Only one existing trace event uses a floating point type. Unfortunately
float and double cannot be supported since SystemTap does not have
floating point types.
Remove float and double from the whitelist and document this limitation.
Update the migrate_transferred trace event to use uint64_t instead of
double.
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-id: 20180621150254.4922-1-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
It often happens that just a few discriminator values imply extra data in
a flat union. Existing checks did not make possible to leave other values
uncovered. Such cases had to be worked around by either stating a dummy
(empty) type or introducing another (subset) discriminator enumeration.
Both options create redundant entities in qapi files for little profit.
With this patch it is not necessary anymore to add designated union
fields for every possible value of a discriminator enumeration.
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Message-Id: <1529311206-76847-2-git-send-email-anton.nefedov@virtuozzo.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
