Since version 5.2 commit 6eb7a07129 ("hw/block/nvme: change controller
pci id"), the emulated NVMe controller has defaulted to a non-Intel PCI
identifier.
Deprecate the compatibility parameter so we can get rid of it once and
for all.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
The Linux kernel quirks the QEMU NVMe controller pretty heavily because
of the namespace identifier mess. Since this is now fixed, bump the
firmware revision number to allow the quirk to be disabled for this
revision.
As of now, bump the firmware revision number to be equal to the QEMU
release version number.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Do not report the "null uuid" (all zeros) in the namespace
identification descriptors.
Reported-by: Luis Chamberlain <mcgrof@kernel.org>
Reported-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Do not default to generate an UUID for namespaces if it is not
explicitly specified.
This is a technically a breaking change in behavior. However, since the
UUID changes on every VM launch, it is not spec compliant and is of
little use since the UUID cannot be used reliably anyway and the
behavior prior to this patch must be considered buggy.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
We cannot provide auto-generated unique or persistent namespace
identifiers (EUI64, NGUID, UUID) easily. Since 6.1, namespaces have been
assigned a generated EUI64 of the form "52:54:00:<namespace counter>".
This is will be unique within a QEMU instance, but not globally.
Revert that this is assigned automatically and immediately deprecate the
compatibility parameter. Users can opt-in to this with the
`eui64-default=on` device parameter or set it explicitly with
`eui64=UINT64`.
Cc: libvir-list@redhat.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
The Identify Controller Serial Number (SN) is the serial number for the
NVM subsystem and must be the same across all controller in the NVM
subsystem.
Enforce this.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Pass the right constant to nvme_smart_event(). The NVME_AER* values hold
the bit position in the SMART byte, not the shifted value that we expect
it to be in nvme_smart_event().
Fixes: c62720f137 ("hw/block/nvme: trigger async event during injecting smart warning")
Acked-by: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Current implementation have problem in the read part of copy command.
Because there is no metadata mangling before nvme_dif_check invocation,
reftag error could be thrown for blocks of namespace that have not been
previously written to.
Signed-off-by: Dmitry Tikhov <d.tihov@yadro.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Since there is no return after nvme_dsm_cb invocation, metadata
associated with non-zero block range is currently zeroed. Also this
behaviour leads to segfault since we schedule iocb->bh two times.
First when entering nvme_dsm_cb with iocb->idx == iocb->nr and
second because of missing return on call stack unwinding by calling
blk_aio_pwrite_zeroes and subsequent nvme_dsm_cb callback.
Fixes: d7d1474fd8 ("hw/nvme: reimplement dsm to allow cancellation")
Signed-off-by: Dmitry Tikhov <d.tihov@yadro.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Since nlbas is of type int, it does not work with large namespace size
values, e.g., 9 TB size of file backing namespace and 8 byte metadata
with 4096 bytes lbasz gives negative nlbas value, which is later
promoted to negative int64_t type value and results in negative
ns->moff which breaks namespace
Signed-off-by: Dmitry Tikhov <ddtikhov@gmail.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
We have "-sdl" and "-curses", but no "-gtk" and no "-cocoa" ...
these old-style options are rather confusing than helpful nowadays.
Now that the deprecation period is over, let's remove them, so we
get a cleaner interface (where "-display" is the only way to select
the user interface).
Message-Id: <20220519155625.1414365-4-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The "-display sdl" option still uses a hand-crafted parser for its
parameters since we didn't want to drag an interface we considered
somewhat flawed into the QAPI schema. Since the flaws are gone now,
it's time to QAPIfy.
This introduces the new "DisplaySDL" QAPI struct that is used to hold
the parameters that are unique to the SDL display. The only specific
parameter is currently "grab-mod" that is used to specify the required
modifier keys to escape from the mouse grabbing mode.
Message-Id: <20220519155625.1414365-3-thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Storage key controlled protection is currently not honored when
emulating instructions.
If available, enable key protection for the MEM_OP ioctl, thereby
enabling it for the s390_cpu_virt_mem_* functions, when using kvm.
As a result, the emulation of the following instructions honors storage
keys:
* CLP
The Synch I/O CLP command would need special handling in order
to support storage keys, but is currently not supported.
* CHSC
Performing commands asynchronously would require special
handling, but commands are currently always synchronous.
* STSI
* TSCH
Must (and does) not change channel if terminated due to
protection.
* MSCH
Suppressed on protection, works because fetching instruction.
* SSCH
Suppressed on protection, works because fetching instruction.
* STSCH
* STCRW
Suppressed on protection, this works because no partial store is
possible, because the operand cannot span multiple pages.
* PCISTB
* MPCIFC
* STPCIFC
Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Message-Id: <20220506153956.2217601-3-scgl@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The machine name already contains the words "ccw" and "virtio", so
using "VirtIO-ccw" in the description likely does not really help
the average user to get an idea what this machine type is about.
Thus let's switch to "Virtual s390x machine" now, since "virtual
machine" should be a familiar term, and "s390x" signals that this
is about 64-bit guests (unlike S390 which could mean that it is
31-bit only).
Also expand "v" to "version", since this makes it easier to use
this macro also with non-numeric machine names in downstream.
Message-Id: <20220506065026.513590-1-thuth@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
According to the M68040 Users Manual, section 8.4.3,
Six word stack frame (format 2), Trace (and others) is
supposed to record the next insn in PC and the address
of the trapping instruction in ADDRESS.
Create gen_raise_exception_format2 to record the trapping
pc in env->mmu.ar. Update m68k_interrupt_all to pass the
value to do_stack_frame. Update cpu_loop to handle EXCP_TRACE.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220602013401.303699-9-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
According to the M68040 Users Manual, section 8.4.3,
Six word stack frame (format 2), Zero Div (and others)
is supposed to record the next insn in PC and the
address of the trapping instruction in ADDRESS.
While the N, Z and V flags are documented to be undefine on DIV0,
the C flag is documented as always cleared.
Update helper_div* to take the instruction length as an argument
and use raise_exception_format2. Hoist the reset of the C flag
above the division by zero check.
Update m68k_interrupt_all to pass mmu.ar to do_stack_frame.
Update cpu_loop to pass mmu.ar to siginfo.si_addr, as the
kernel does in trap_c().
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220602013401.303699-8-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
According to the M68040 Users Manual, section 8.4.3,
Six word stack frame (format 2), CHK, CHK2 (and others)
are supposed to record the next insn in PC and the
address of the trapping instruction in ADDRESS.
Create a raise_exception_format2 function to centralize recording
of the trapping pc in mmu.ar, plus advancing to the next insn.
Update m68k_interrupt_all to pass mmu.ar to do_stack_frame.
Update cpu_loop to pass mmu.ar to siginfo.si_addr, as the
kernel does in trap_c().
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220602013401.303699-7-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Various testing updates
- fix some gitlab container dependencies
- report meson test results via JUnit
- fix meson display of enabled cross compilers
- convert more cross build containers to lcitool and Debian 11
- re-factor cross compiler detection
- use test cross-compilers for building ROMs
- disable CI runs by default (see docs)
- fix some broken links in development documentation
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmKXqXYACgkQ+9DbCVqe
# KkTaogf+PpslFcqKzcT+CY2zkmen7+531fSHQ2oP6+lMPSuIDXi7jn/d/IXQ1gcI
# BfCvnAsictBzBqCPNhKYd8zxZwdzSYT3QtRWR4D86G26tyL5Zsuw+HrXuja/af7A
# RDULBl8HGKuZKY83QI1wTekjamfdFQeWn1t9051np5mPt0buPe4S3xELl0A/QGX+
# f3H9hqYeQ+tb11a5KXEsbWrQqKRCNrjFKI2iKyz5rZa73Go0ODjHrtTfBccBNJv4
# TBFxAW/XU+AUTI3vgtAsBIonEz7AcJyqlMffnx93GIttuChn5KRIIMPuz7Oztn89
# OFHtGajs3DSEWjfEg9xncCaL7EFasA==
# =9Iod
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 01 Jun 2022 11:01:26 AM PDT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-testing-next-010622-3' of https://github.com/stsquad/qemu: (33 commits)
docs/devel: clean-up the CI links in the docs
gitlab: don't run CI jobs in forks by default
gitlab: convert build/container jobs to .base_job_template
gitlab: convert static checks to .base_job_template
gitlab: convert Cirrus jobs to .base_job_template
gitlab: introduce a common base job template
configure: remove unused variables from config-host.mak
configure: enable cross compilation of vof
configure: enable cross-compilation of optionrom
configure: enable cross-compilation of s390-ccw
configure: move symlink configuration earlier
configure: include more binutils in tests/tcg makefile
configure: introduce --cross-prefix-*=
configure: handle host compiler in probe_target_compiler
configure: add missing cross compiler fallbacks
tests/tcg: merge configure.sh back into main configure script
tests/tcg: correct target CPU for sparc32
configure, meson: move symlinking of ROMs to meson
build: do a full build before running TCG tests
build: add a more generic way to specify make->ninja dependencies
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There where some broken links so fix those up with proper references
to the devel docs. I also did a little light copy-editing to reflect
the current state and broke up a paragraph to reduce the "wall of
text" effect.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220527153603.887929-34-alex.bennee@linaro.org>
To preserve CI shared runner credits we don't want to run
pipelines on every push.
This sets up the config so that pipelines are never created
for contributors by default. To override this the QEMU_CI
variable can be set to a non-zero value. If set to 1, the
pipeline will be created but all jobs will remain manually
started. The contributor can selectively run jobs that they
care about. If set to 2, the pipeline will be created and
all jobs will immediately start.
This behavior can be controlled using push variables
git push -o ci.variable=QEMU_CI=1
To make this more convenient define an alias
git config --local alias.push-ci "push -o ci.variable=QEMU_CI=1"
git config --local alias.push-ci-now "push -o ci.variable=QEMU_CI=2"
Which lets you run
git push-ci
to create the pipeline, or
git push-ci-now
to create and run the pipeline
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220526110705.59952-6-berrange@redhat.com>
[AJB: fix typo, replicate alias tips in ci.rst]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220527153603.887929-33-alex.bennee@linaro.org>
This converts the main build and container jobs to use the
base job rules, defining the following new variables
- QEMU_JOB_SKIPPED - jobs that are known to be currently
broken and should not be run. Can still be manually
launched if desired.
- QEMU_JOB_AVOCADO - jobs that run the Avocado integration
test harness.
- QEMU_JOB_PUBLISH - jobs that publish content after the
branch is merged upstream
As build-tools-and-docs runs on master we declare the requirement of
building amd64-debian-container optional as it should already exits
once we merge.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220526110705.59952-5-berrange@redhat.com>
[AJB: fix upstream typo, mention optional container req]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220527153603.887929-32-alex.bennee@linaro.org>
