Fixes the following errors:
* ERROR: line over 90 characters
* ERROR: code indent should never use tabs
* ERROR: space prohibited after that open square bracket '['
* ERROR: do not initialise statics to 0 or NULL
* ERROR: "(foo*)" should be "(foo *)"
Signed-off-by: Emil Condrea <emilcondrea@gmail.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Quan Xu <xuquan8@huawei.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
The Cadence UART device emulator stores 'baud rate generator'
and 'baud rate divider' values, used in computing speed, in two
registers. The device specification defines their range and
their reset value. Use their correct value when resetting the
device in cadence_uart_reset.
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-id: 1477378140-2670-1-git-send-email-ppandit@redhat.com
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that all front end use qemu_chr_fe_init(), we can move chardev
claiming in init(), and add a function deinit() to release the chardev
and cleanup handlers.
The qemu_chr_fe_claim_no_fail() for property are gone, since the
property will raise an error instead. In other cases, where there is
already an error path, an error is raised instead. Finally, other cases
are handled by &error_abort in qemu_chr_fe_init().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-19-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Store the property in a CharBackend instead of CharDriverState*. This
also replace systematically chr by chr.chr to access the
CharDriverState*. The following patches will replace it with calls to
qemu_chr_fe CharBackend functions.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-12-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
16550A UART device uses an oscillator to generate frequencies
(baud base), which decide communication speed. This speed could
be changed by dividing it by a divider. If the divider is
greater than the baud base, speed is set to zero, leading to a
divide by zero error. Add check to avoid it.
Reported-by: Huawei PSIRT <psirt@huawei.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <1476251888-20238-1-git-send-email-ppandit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now all the usages of the old version of VMSTATE_VIRTIO_DEVICE are gone,
so we can get rid of the conditionals, and the old macro.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Ports enter a "throttled" state when writing to the chardev would block.
The current output VirtQueueElement is kept around until the chardev
becomes writable again.
There are several places in the virtio-serial lifecycle where the
VirtQueueElement should be thrown away. For example, if the virtio
device is reset then virtqueue elements are no longer valid.
This patch adds the discard_throttle_data() function to unmap the
scatter-gather list and decrement vq->inuse. This ensures that the
VirtQueueElement is freed properly.
Cc: amit.shah@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add support for enabling the virtio 1.0 "emergency write"
(VIRTIO_CONSOLE_F_EMERG_WRITE) feature. The previous patch introduced
the plumbing required for this; now we expose the virtio feature to
the guest. The feature is disabled for compatibility machines to avoid
exposing a new feature to existing guests.
As required by the virtio 1.0 spec, the emergency write functionality
is available to the guest even if the guest doesn't negotatiate the
feature, as well as before feature negotation.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add the infrastructure required for the virtio 1.0 "emergency write"
(VIRTIO_CONSOLE_F_EMERG_WRITE) feature. Because we don't touch the
size of the configuration area, guests will not be able to actually
make use of this without further patches.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The qemu_chr_fe_write method will return -1 on EAGAIN if the
chardev backend write would block. Almost no callers of the
qemu_chr_fe_write() method check the return value, instead
blindly assuming data was successfully sent. In most cases
this will lead to silent data loss on interactive consoles,
but in some cases (eg RNG EGD) it'll just cause corruption
of the protocol being spoken.
We unfortunately can't fix the virtio-console code, due to
a bug in the Linux guest drivers, which would cause the
entire Linux kernel to hang if we delay processing of the
incoming data in any way. Fixing this requires first fixing
the guest driver to not hold spinlocks while writing to the
hvc device backend.
Fixes bug: https://bugs.launchpad.net/qemu/+bug/1586756
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1473170165-540-4-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The write_console_data() method in sclpconsole-lm.c checks
whether the return value of qemu_chr_fe_write() has the
value of -EAGAIN and if so then increments the buffer offset
by the value of EAGAIN. Fortunately qemu_chr_fe_write() will
never return EAGAIN directly, rather it returns -1 with
errno set to EAGAIN, so this broken code path was not
reachable. The behaviour on EAGAIN was stil bad though,
causing the write_console_data() to busy_wait repeatedly
calling qemu_chr_fe_write() with no sleep between iters.
Just remove all this loop logic and replace with a call
to qemu_chr_fe_write_all().
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1473170165-540-3-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The isa_register_portio_list() function allocates ioports
data/state. Let's keep the reference to this data on some owner. This
isn't enough to fix leaks, but at least, ASAN stops complaining of
direct leaks. Further cleanup would require calling
portio_list_del/destroy().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
The virtio-console.c file handles both serial consoles
and interactive consoles, since they're backed by the
same device model.
Since serial devices are expected to be reliable and
need to notify the guest when the backend is opened
or closed, the virtio-console.c file wires up support
for chardev events. This affects both serial consoles
and interactive consoles, using a network connection
based chardev backend such as 'socket', but not when
using a PTY based backend or plain 'file' backends.
When the host side is not connected the handle_output()
method in virtio-serial-bus.c will drop any data sent
by the guest, before it even reaches the virtio-console.c
code. This means that if the chardev has a logfile
configured, the data will never get logged.
Consider for example, configuring a x86_64 guest with a
plain UART serial port
-chardev socket,id=charserial1,host=127.0.0.1,port=9001,server,nowait,logfile=console1.log,logappend=on
-device isa-serial,chardev=charserial1,id=serial1
vs a s390 guest which has to use the virtio-console port
-chardev socket,id=charconsole1,host=127.0.0.1,port=9000,server,nowait,logfile=console2.log,logappend=on
-device virtconsole,chardev=charconsole1,id=console1
The isa-serial one gets data written to the log regardless
of whether a client is connected, while the virtioconsole
one only gets data written to the log when a client is
connected.
There is no need for virtio-serial-bus.c to aggressively
drop the data for console devices, as the chardev code is
prefectly capable of discarding the data itself.
So this patch changes virtconsole devices so that they
are always marked as having the host side open. This
ensures that the guest OS will always send any data it
has (Linux virtio-console hvc driver actually ignores
the host open state and sends data regardless, but we
should not rely on that), and also prevents the
virtio-serial-bus code prematurely discarding data.
The behaviour of virtserialport devices is *not* changed,
only virtconsole, because for the former, it is important
that the guest OSknow exactly when the host side is opened
/ closed so it can do any protocol re-negotiation that may
be required.
Fixes bug: https://bugs.launchpad.net/qemu/+bug/1599214
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1470241360-3574-2-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Forcibly convert it to a vmstate wrapper; proper conversion
comes later.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tracked down with an ugly, brittle and probably buggy Perl script.
Also move includes converted to <...> up so they get included before
ours where that's obviously okay.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Otherwise, a serial port can get stuck if it is migrated while flow control
is in effect.
Tested-by: Bret Ketchum <bcketchum@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Otherwise, this can cause serial_xmit to be entered with LSR.TEMT=0,
which is invalid and causes an assertion failure.
Reported-by: Bret Ketchum <bcketchum@gmail.com>
Tested-by: Bret Ketchum <bcketchum@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
g_source_attach can return any value between 1 and UINT_MAX if you let
QEMU run long enough. However, qemu_chr_fe_add_watch can also return
a negative errno value when the device is disconnected or does not
support chr_add_watch. Change it to return zero to avoid overloading
these values.
Fix the cadence_uart which asserts in this case (easily obtained with
"-serial pty").
Tested-by: Bret Ketchum <bcketchum@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
serial_xmit starts transmission of whatever is in the transmitter
register, THR or FIFO; serial_watch_cb is a wrapper around it and is
only used as a qemu_chr_fe_add_watch callback.
Tested-by: Bret Ketchum <bcketchum@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move common code outside the if, and reset tsr_retry even in loopback mode.
Right now it cannot become non-zero, but it will be possible as soon as
we start respecting the baud rate.
Tested-by: Bret Ketchum <bcketchum@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It can never become negative; reflect this in the type of the field
and simplify the conditions.
Tested-by: Bret Ketchum <bcketchum@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
# gpg: Signature made Mon 20 Jun 2016 21:29:27 BST
# gpg: using RSA key 0x9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/tracing-pull-request: (42 commits)
trace: split out trace events for linux-user/ directory
trace: split out trace events for qom/ directory
trace: split out trace events for target-ppc/ directory
trace: split out trace events for target-s390x/ directory
trace: split out trace events for target-sparc/ directory
trace: split out trace events for net/ directory
trace: split out trace events for audio/ directory
trace: split out trace events for ui/ directory
trace: split out trace events for hw/alpha/ directory
trace: split out trace events for hw/arm/ directory
trace: split out trace events for hw/acpi/ directory
trace: split out trace events for hw/vfio/ directory
trace: split out trace events for hw/s390x/ directory
trace: split out trace events for hw/pci/ directory
trace: split out trace events for hw/ppc/ directory
trace: split out trace events for hw/9pfs/ directory
trace: split out trace events for hw/i386/ directory
trace: split out trace events for hw/isa/ directory
trace: split out trace events for hw/sd/ directory
trace: split out trace events for hw/sparc/ directory
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The old milkymist.org domain just forwards to mm-labs.hk nowadays. I've
created a mirror of the documents.
Signed-off-by: Michael Walle <michael@walle.cc>
qemu/osdep.h checks whether MAP_ANONYMOUS is defined, but this check
is bogus without a previous inclusion of sys/mman.h. Include it in
sysemu/os-posix.h and remove it from everywhere else.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
