The QERR_ macros are leftovers from the days of "rich" error objects.
We've been trying to reduce their remaining use.
The stubbed out Rocker monitor commands are the last remaining users
of QERR_FEATURE_DISABLED. They fail like this:
(qemu) info rocker mumble
Error: The feature 'rocker' is not enabled
The real rocker commands fail like this when the named object doesn't
exist:
Error: rocker mumble not found
If that's good enough when Rocker is enabled, then it's good enough
when it's disabled, so replace QERR_FEATURE_DISABLED with that, and
drop the macro.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230207075115.1525-13-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Currently, VMXNET3_MAX_MTU itself (being 9000) is not considered a
valid value for the MTU, but a guest running ESXi 7.0 might try to
set it and fail the assert [0].
In the Linux kernel, dev->max_mtu itself is a valid value for the MTU
and for the vmxnet3 driver it's 9000, so a guest running Linux will
also fail the assert when trying to set an MTU of 9000.
VMXNET3_MAX_MTU and s->mtu don't seem to be used in relation to buffer
allocations/accesses, so allowing the upper limit itself as a value
should be fine.
[0]: https://forum.proxmox.com/threads/114011/
Fixes: d05dcd94ae ("net: vmxnet3: validate configuration values during activate (CVE-2021-20203)")
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
With the `size += 4` before the call to `crc32`, the CRC calculation
would overrun the buffer. Size is used in the while loop starting on
line 1009 to determine how much data to write back, with the last
four bytes coming from `crc_ptr`, so do need to increase it, but should
do this after the computation.
I'm unsure why this use of uninitialized memory in the CRC doesn't
result in CRC errors, but it seems clear to me that it should not be
included in the calculation.
Signed-off-by: Stephen Longfield <slongfield@google.com>
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20221220221437.3303721-1-slongfield@google.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The 'hwaddr' type is defined in "exec/hwaddr.h" as:
hwaddr is the type of a physical address
(its size can be different from 'target_ulong').
All definitions use the 'HWADDR_' prefix, except TARGET_FMT_plx:
$ fgrep define include/exec/hwaddr.h
#define HWADDR_H
#define HWADDR_BITS 64
#define HWADDR_MAX UINT64_MAX
#define TARGET_FMT_plx "%016" PRIx64
^^^^^^
#define HWADDR_PRId PRId64
#define HWADDR_PRIi PRIi64
#define HWADDR_PRIo PRIo64
#define HWADDR_PRIu PRIu64
#define HWADDR_PRIx PRIx64
#define HWADDR_PRIX PRIX64
Since hwaddr's size can be *different* from target_ulong, it is
very confusing to read one of its format using the 'TARGET_FMT_'
prefix, normally used for the target_long / target_ulong types:
$ fgrep TARGET_FMT_ include/exec/cpu-defs.h
#define TARGET_FMT_lx "%08x"
#define TARGET_FMT_ld "%d"
#define TARGET_FMT_lu "%u"
#define TARGET_FMT_lx "%016" PRIx64
#define TARGET_FMT_ld "%" PRId64
#define TARGET_FMT_lu "%" PRIu64
Apparently this format was missed during commit a8170e5e97
("Rename target_phys_addr_t to hwaddr"), so complete it by
doing a bulk-rename with:
$ sed -i -e s/TARGET_FMT_plx/HWADDR_FMT_plx/g $(git grep -l TARGET_FMT_plx)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230110212947.34557-1-philmd@linaro.org>
[thuth: Fix some warnings from checkpatch.pl along the way]
Signed-off-by: Thomas Huth <thuth@redhat.com>
PCIDeviceClass and PCIDevice are defined in pci.h. Many users of the
header don't actually need them. Similar structs live in their own
headers: PCIBusClass and PCIBus in pci_bus.h, PCIBridge in
pci_bridge.h, PCIHostBridgeClass and PCIHostState in pci_host.h,
PCIExpressHost in pcie_host.h, and PCIERootPortClass, PCIEPort, and
PCIESlot in pcie_port.h.
Move PCIDeviceClass and PCIDeviceClass to new pci_device.h, along with
the code that needs them. Adjust include directives.
This also enables the next commit.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221222100330.380143-6-armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To support configure interrupt for vhost-vdpa
Introduce VIRTIO_CONFIG_IRQ_IDX -1 as configure interrupt's queue index,
Then we can reuse the functions guest_notifier_mask and guest_notifier_pending.
Add the check of queue index in these drivers, if the driver does not support
configure interrupt, the function will just return
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20221222070451.936503-2-lulu@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch aims to fix unexpected negotiation features for
vhost-user netdev interface.
When openvswitch reconnect Qemu after an unexpected disconnection
and Qemu therefore start the vhost_dev, acked_features field in
vhost_dev is initialized with value fetched from acked_features
field in NetVhostUserState, which should be up-to-date at that
moment but Qemu could not make it actually during the time window
of virtio features negotiation.
So we save the acked_features right after being configured by
guest virtio driver so it can be used to restore acked_features
field in vhost_dev correctly.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Signed-off-by: Guoyi Tu <tugy@chinatelecom.cn>
Signed-off-by: Liuxiangdong <liuxiangdong5@huawei.com>
Message-Id: <b9f8cf5561a79ea65ea38960e5a5e6d3707eef0a.1671627406.git.huangy81@chinatelecom.cn>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Size is used at lines 1088/1188 for the loop, which reads the last 4
bytes from the crc_ptr so it does need to get increased, however it
shouldn't be increased before the buffer is passed to CRC computation,
or the crc32 function will access uninitialized memory.
This was pointed out to me by clg@kaod.org during the code review of
a similar patch to hw/net/ftgmac100.c
Change-Id: Ib0464303b191af1e28abeb2f5105eb25aadb5e9b
Signed-off-by: Stephen Longfield <slongfield@google.com>
Reviewed-by: Patrick Venture <venture@google.com>
Message-id: 20221221183202.3788132-1-slongfield@google.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It seems a little bit weird that the para-virtualized x86 VMWare
devices "vmware-svga" and "vmxnet3" also show up in non-x86 targets.
They are likely pretty useless there (since the guest OSes likely
do not have any drivers for those enabled), so let's change this and
only enable those devices by default for the classical x86 targets.
Message-Id: <20221213095144.42355-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Miscellaneous patches for 2022-12-14
# gpg: Signature made Wed 14 Dec 2022 15:23:02 GMT
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* tag 'pull-misc-2022-12-14' of https://repo.or.cz/qemu/armbru:
ppc4xx_sdram: Simplify sdram_ddr_size() to return
block/vmdk: Simplify vmdk_co_create() to return directly
cleanup: Tweak and re-run return_directly.cocci
io: Tidy up fat-fingered parameter name
qapi: Use returned bool to check for failure (again)
sockets: Use ERRP_GUARD() where obviously appropriate
qemu-config: Use ERRP_GUARD() where obviously appropriate
qemu-config: Make config_parse_qdict() return bool
monitor: Use ERRP_GUARD() in monitor_init()
monitor: Simplify monitor_fd_param()'s error handling
error: Move ERRP_GUARD() to the beginning of the function
error: Drop a few superfluous ERRP_GUARD()
error: Drop some obviously superfluous error_propagate()
Drop more useless casts from void * to pointer
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The has_FOO for pointer-valued FOO are redundant, except for arrays.
They are also a nuisance to work with. Recent commit "qapi: Start to
elide redundant has_FOO in generated C" provided the means to elide
them step by step. This is the step for qapi/rocker.json.
Said commit explains the transformation in more detail. The invariant
violations mentioned there do not occur here.
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221104160712.3005652-23-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The has_FOO for pointer-valued FOO are redundant, except for arrays.
They are also a nuisance to work with. Recent commit "qapi: Start to
elide redundant has_FOO in generated C" provided the means to elide
them step by step. This is the step for qapi/net.json.
Said commit explains the transformation in more detail. The invariant
violations mentioned there do not occur here.
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221104160712.3005652-19-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[Fixes for MacOS squashed in]
virtio: regression fix
Fixes regression with migration and vsock, as fixing that
exposes some known issues in vhost user cleanup, this attempts
to fix those as well. More work on vhost user is needed :)
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmOIWaEPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRp+RQH/2PVAjD/GA3zF5F3Z07vH51c55T6tluZ85c3
# 4u66SSkF5JR1hATCujYCtrt9V0mnqhmhhm4gJH5xcsynFjjyIXd2dDrTFRpCtRgn
# icXOmYCc9pCu8XsluJnWvY/5r/KEDxqmGVE8Kyhz551QjvsBkezhI9x9vhJZJLCn
# Xn1XQ/3jpUcQLwasu8AxZb0IDW8WdCtonbke6xIyMzOYGR2bnRdXlDXVVG1zJ/SZ
# eS3HUad71VekhfzWq0fx8yEJnfvbes9vo007y8rOGdHOcMneWGAie52W1dOBhclh
# Zt56zID55t1USEwlPxkZSj7UXNbVl7Uz/XU5ElN0yTesttP4Iq0=
# =ZkaX
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 01 Dec 2022 02:37:05 EST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu:
include/hw: VM state takes precedence in virtio_device_should_start
hw/virtio: generalise CHR_EVENT_CLOSED handling
hw/virtio: add started_vu status field to vhost-user-gpio
vhost: enable vrings in vhost_dev_start() for vhost-user devices
tests/qtests: override "force-legacy" for gpio virtio-mmio tests
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Commit 02b61f38d3 ("hw/virtio: incorporate backend features in features")
properly negotiates VHOST_USER_F_PROTOCOL_FEATURES with the vhost-user
backend, but we forgot to enable vrings as specified in
docs/interop/vhost-user.rst:
If ``VHOST_USER_F_PROTOCOL_FEATURES`` has not been negotiated, the
ring starts directly in the enabled state.
If ``VHOST_USER_F_PROTOCOL_FEATURES`` has been negotiated, the ring is
initialized in a disabled state and is enabled by
``VHOST_USER_SET_VRING_ENABLE`` with parameter 1.
Some vhost-user front-ends already did this by calling
vhost_ops.vhost_set_vring_enable() directly:
- backends/cryptodev-vhost.c
- hw/net/virtio-net.c
- hw/virtio/vhost-user-gpio.c
But most didn't do that, so we would leave the vrings disabled and some
backends would not work. We observed this issue with the rust version of
virtiofsd [1], which uses the event loop [2] provided by the
vhost-user-backend crate where requests are not processed if vring is
not enabled.
Let's fix this issue by enabling the vrings in vhost_dev_start() for
vhost-user front-ends that don't already do this directly. Same thing
also in vhost_dev_stop() where we disable vrings.
[1] https://gitlab.com/virtio-fs/virtiofsd
[2] https://github.com/rust-vmm/vhost/blob/240fc2966/crates/vhost-user-backend/src/event_loop.rs#L217
Fixes: 02b61f38d3 ("hw/virtio: incorporate backend features in features")
Reported-by: German Maglione <gmaglione@redhat.com>
Tested-by: German Maglione <gmaglione@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20221123131630.52020-1-sgarzare@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20221130112439.2527228-3-alex.bennee@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pc,virtio: regression, test fixes
fixes regressions:
virtio error message triggered by seabios
failure in vhost due to VIRTIO_F_RING_RESET
broken keyboard under seabios
some biosbits test fixes
there's still a known regression with migration and vsock,
not fixed yet.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmN8os4PHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpw+UH/2JOoxqzkkq4QyV5PzmjsiyyMbrBqFSOTro2
# 98k9MwxNWHIk6fi3FVIz+LX1EdwDbMl44IHQ88xo7k39V7ThvVvLfjaQySSeoCfE
# 04++AvkOQ/O8W7sob17r2iPWIHKPIndq8uB652T89o1I/nhmFMsUkdRWmVQ3XsDk
# DnPZxjBQnKY0oSvBd7SmSI3C+eA4lF1tht50ZxmOshLx4OSjK/maFVpIyLsUGTMn
# 6OMxKffDjfvw5z94+pGN1RQm9xu7OwtFZyUnH16xoQUmWSXjzcYXUZ3buTY+eAyJ
# I5j9ox27Cqn1wGcypUiTCKLIExEMBfvNY4ovyRa1xvW+MXluVyE=
# =bF2U
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 22 Nov 2022 05:22:06 EST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu:
virtio: disable error for out of spec queue-enable
acpi/tests/avocado/bits: keep the work directory when BITS_DEBUG is set in env
tests/avocado: configure acpi-bits to use avocado timeout
MAINTAINERS: add mst to list of biosbits maintainers
tests: acpi: x86: update expected DSDT after moving PRQx fields in _SB scope
acpi: x86: move RPQx field back to _SB scope
tests: acpi: whitelist DSDT before moving PRQx to _SB scope
vhost: mask VIRTIO_F_RING_RESET for vhost and vhost-user devices
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Commit 69e1c14aa2 ("virtio: core: vq reset feature negotation support")
enabled VIRTIO_F_RING_RESET by default for all virtio devices.
This feature is not currently emulated by QEMU, so for vhost and
vhost-user devices we need to make sure it is supported by the offloaded
device emulation (in-kernel or in another process).
To do this we need to add VIRTIO_F_RING_RESET to the features bitmap
passed to vhost_get_features(). This way it will be masked if the device
does not support it.
This issue was initially discovered with vhost-vsock and vhost-user-vsock,
and then also tested with vhost-user-rng which confirmed the same issue.
They fail when sending features through VHOST_SET_FEATURES ioctl or
VHOST_USER_SET_FEATURES message, since VIRTIO_F_RING_RESET is negotiated
by the guest (Linux >= v6.0), but not supported by the device.
Fixes: 69e1c14aa2 ("virtio: core: vq reset feature negotation support")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1318
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20221121101101.29400-1-sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Acked-by: Jason Wang <jasowang@redhat.com>
There are two Tx Descriptor formats called mode 0 and mode 1. The mode
is determined by the Large Send bit.
CP_TX_IPCS (bit 18) is defined in mode 1 but the code checks the bit
unconditionally. In mode 0 bit 18 is part of the Large Send MSS value.
Explicitly check the Large Send bit to distinguish Tx command modes.
This avoids bugs where modes are confused. Note that I didn't find any
actual bugs aside from needlessly computing the IP checksum when the
Large Send bit is enabled.
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221117165554.1773409-3-stefanha@redhat.com>
The device turns the Tx Descriptor into a Tx Status descriptor after
fully reading the descriptor. This involves clearing Tx Own (bit 31) to
indicate that the driver has ownership of the descriptor again as well
as several other bits.
The code keeps the first dword of the Tx Descriptor in the txdw0 local
variable. txdw0 is reused to build the first word of the Tx Status
descriptor. Later on the code uses txdw0 again, incorrectly assuming
that it still contains the first dword of the Tx Descriptor. The tx
offloading code misbehaves because it sees bogus bits in txdw0.
Use a separate local variable for Tx Status and preserve Tx Descriptor
in txdw0.
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221117165554.1773409-2-stefanha@redhat.com>
Run shell script:
cat << EOF | valgrind qemu-system-i386 -display none -machine accel=qtest, -m \
512M -M q35 -nodefaults -device virtio-net,netdev=net0 -netdev \
user,id=net0 -qtest stdio
outl 0xcf8 0x80000810
outl 0xcfc 0xc000
outl 0xcf8 0x80000804
outl 0xcfc 0x01
outl 0xc00d 0x0200
outl 0xcf8 0x80000890
outb 0xcfc 0x4
outl 0xcf8 0x80000889
outl 0xcfc 0x1c000000
outl 0xcf8 0x80000893
outw 0xcfc 0x100
EOF
Got:
==68666== Invalid read of size 8
==68666== at 0x688536: virtio_net_queue_enable (virtio-net.c:575)
==68666== by 0x6E31AE: memory_region_write_accessor (memory.c:492)
==68666== by 0x6E098D: access_with_adjusted_size (memory.c:554)
==68666== by 0x6E4DB3: memory_region_dispatch_write (memory.c:1521)
==68666== by 0x6E31AE: memory_region_write_accessor (memory.c:492)
==68666== by 0x6E098D: access_with_adjusted_size (memory.c:554)
==68666== by 0x6E4DB3: memory_region_dispatch_write (memory.c:1521)
==68666== by 0x6EBCD3: flatview_write_continue (physmem.c:2820)
==68666== by 0x6EBFBF: flatview_write (physmem.c:2862)
==68666== by 0x6EF5E7: address_space_write (physmem.c:2958)
==68666== by 0x6DFDEC: cpu_outw (ioport.c:70)
==68666== by 0x6F6DF0: qtest_process_command (qtest.c:480)
==68666== Address 0x29087fe8 is 24 bytes after a block of size 416 in arena "client"
That is reported by Alexander Bulekov. https://gitlab.com/qemu-project/qemu/-/issues/1309
Here, the queue_index is the index of the cvq, but in some cases cvq
does not have the corresponding NetClientState, so overflow appears.
I add a check here, ignore illegal queue_index and cvq queue_index.
Note the queue_index is below the VIRTIO_QUEUE_MAX but greater or equal
than cvq index could hit this. Other devices are similar.
Fixes: 7f863302 ("virtio-net: support queue_enable")
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/1309
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Message-Id: <20221110095739.130393-1-xuanzhuo@linux.alibaba.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch is part of adding vhost-user vhost_dev_start support. The
motivation is to improve backend configuration speed and reduce live
migration VM downtime.
Moving the device start routines after finishing all the necessary device
and VQ configuration, further aligning to the virtio specification for
"device initialization sequence".
Following patch will add vhost-user vhost_dev_start support.
Signed-off-by: Yajun Wu <yajunw@nvidia.com>
Acked-by: Parav Pandit <parav@nvidia.com>
Message-Id: <20221017064452.1226514-2-yajunw@nvidia.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There were several different ways to deal with the situation where the
vector specified for a msix function is out of bound:
- early return a function and keep progresssing
- propagate the error to the caller
- mark msix unusable
- assert it is in bound
- just ignore
An out-of-bound vector should not be specified if the device
implementation is correct so let msix functions always assert that the
specified vector is in range.
An exceptional case is virtio-pci, which allows the guest to configure
vectors. For virtio-pci, it is more appropriate to introduce its own
checks because it is sometimes too late to check the vector range in
msix functions.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20220829083524.143640-1-akihiko.odaki@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Yuval Shaia <yuval.shaia.ml@gmail.com>
Signed-off-by: Akihiko Odaki <<a href="mailto:akihiko.odaki@daynix.com" target="_blank">akihiko.odaki@daynix.com</a>><br>
Support queue_enable in vhost-kernel scenario. It can be called when
a vq reset operation has been performed and the vq is restared.
It should be noted that we can restart the vq when the vhost has
already started. When launching a new vhost device, the vhost is not
started and all vqs are not initalized until VIRTIO_PCI_COMMON_STATUS
is written. Thus, we should use vhost_started to differentiate the
two cases: vq reset and device start.
Currently it only supports vhost-kernel.
Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-14-xuanzhuo@linux.alibaba.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtio-net and vhost-kernel implement queue reset.
Queued packets in the corresponding queue pair are flushed
or purged.
For virtio-net, userspace datapath will be disabled later in
__virtio_queue_reset(). It will set addr of vring to 0 and idx to 0.
Thus, virtio_net_receive() and virtio_net_flush_tx() will not receive
or send packets.
For vhost-net, the datapath will be disabled in vhost_net_virtqueue_reset().
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-13-xuanzhuo@linux.alibaba.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce vhost_net_virtqueue_restart(), which can restart the
specific virtqueue when the vhost net started running before.
If it fails to restart the virtqueue, the device will be stopped.
Here we do not reuse vhost_net_start_one() or vhost_dev_start()
because they work at queue pair level. The mem table and features
do not change, so we can call the vhost_virtqueue_start() to
restart a specific queue.
This patch only considers the case of vhost-kernel, when
NetClientDriver is NET_CLIENT_DRIVER_TAP.
Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-11-xuanzhuo@linux.alibaba.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce vhost_virtqueue_reset(), which can reset the specific
virtqueue in the device. Then it will unmap vrings and the desc
of the virtqueue.
Here we do not reuse the vhost_net_stop_one() or vhost_dev_stop(),
because they work at queue pair level. We do not use
vhost_virtqueue_stop() because it may stop the device in the
backend.
This patch only considers the case of vhost-kernel, when
NetClientDriver is NET_CLIENT_DRIVER_TAP.
Furthermore, we do not need net->nc->info->poll() because
it enables userspace datapath and we want to stop all
datapaths for this reset virtqueue here.
Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-10-xuanzhuo@linux.alibaba.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* Fix and test the VISTR instruction on s390x
* Some more small s390x fixes and maintainer updates
* Make sure to remove all temporary files from qtests
* OpenBSD VM test update to version 7.2
* Add sndio to FreeBSD tests
* More patches to enable the qtests on Windows
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmNb1x8RHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbXmcA//TCliiFkhprVxzIqy7zb9uz2Odu+sS4dT
# azUSlXvC14fECm/Rb/rd2VLqCu5x2er8CYauxKQ4VhRImzcDta4kvpt/HKIppN2t
# sqw5tipJL0DYcWBwYL1llvfutM26M+Oh0igwR8uV7b+W1FjojEZdcOr9IZ6E6V55
# wQCE5OHm0VCr61QeI5IBfZTsiPo+DFomUCpj7w66j6i0CVDvmpoe36tCmvGgrcpZ
# SP7ep7/Iq+dnGh2YnJyoUOPlXeeiBCxAygOVnIRXptDeniGoliCFn7ksLdKDQ9qY
# 69pSPR/W7mTZB/HkCRalAbYuYrI9Rcqxdu6c9vcyB8Pr0snQLTf8qThY+BJ2oC4w
# JSGgWVniAk5MmrDazwNRkSbgngYLYf+CcT1h5AANuU5Kt50Bdy9Y3TuL5YVmofEp
# N4bypV0ICImQyDECz76+i5/iJOcWiRyjMfLT6y00dspeuy983xHakrsHGD8xj0U/
# 3IVxnF9bDnUSVg6lFhYrgCB3dRG1TNPJoYQOM7raS5MAPRrDtIuSabwtyn84jo4+
# 9kZRPJBriMBHNsCjGVlJ9CATmaK1SKVAbRcabjgOKoIwhZTpAe6JalykREUJlTys
# hB2V//lWWYPaSpzwY+OkvxoOmJIziixEskOmx6hPcoxID5v/bqlR69W15aUlKuLq
# VWFb+/yMvaE=
# =h0Ep
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 28 Oct 2022 09:20:31 EDT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2022-10-28' of https://gitlab.com/thuth/qemu: (21 commits)
tests/qtest: libqtest: Correct the timeout unit of blocking receive calls for win32
tests/qtest: libqos: Do not build virtio-9p unconditionally
tests/qtest: migration-test: Make sure QEMU process "to" exited after migration is canceled
tests/qtest: libqtest: Introduce qtest_wait_qemu()
tests/qtest: Use EXIT_FAILURE instead of magic number
tests/qtest: device-plug-test: Reverse the usage of double/single quotes
tests/qtest: Support libqtest to build and run on Windows
tests/qtest: Use send/recv for socket communication
accel/qtest: Support qtest accelerator for Windows
tests: Add sndio to the FreeBSD CI containers / VM
tests/vm: update openbsd to release 7.2
tests/qtest/libqos/e1000e: Use e1000_regs.h
tests/qtest/cxl-test: Remove temporary directories after testing
tests/qtest/tpm: Clean up remainders of swtpm
MAINTAINERS: target/s390x/: add Ilya as reviewer
tests/tcg/s390x: Add a test for the vistr instruction
target/s390x: Fix emulation of the VISTR instruction
tests/tcg/s390x: Test compiler flags only once, not every time
s390x/tod-kvm: don't save/restore the TOD in PV guests
s390x: step down as general arch maintainer
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The register definitions in tests/qtest/libqos/e1000e.c had names
different from hw/net/e1000_regs.h, which made it hard to understand
what test codes corresponds to the implementation. Use
hw/net/e1000_regs.h from tests/qtest/libqos/e1000e.c to remove
these duplications.
E1000E_CTRL_EXT_TXLSFLOW is removed from E1000E_CTRL_EXT settings
because hw/net/e1000_regs.h does not have the definition and it is for
TCP segmentation offload, which does not matter for the implemented
tests.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20221013055245.28102-1-akihiko.odaki@daynix.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When virtio_net_flush_tx() reaches the tx_burst value all
the queue is not flushed and nothing restart the timer.
Fix that by doing for TX timer as we do for bottom half TX:
rearming the timer if we find any packet to send during the
virtio_net_flush_tx() call.
Fixes: e3f30488e5 ("virtio-net: Limit number of packets sent per TX flush")
Cc: alex.williamson@redhat.com
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
When virtio-net is used with the socket netdev backend, the backend
can be busy and not able to collect new packets.
In this case, net_socket_receive() returns 0 and registers a poll function
to detect when the socket is ready again.
In virtio_net_tx_bh(), virtio_net_flush_tx() forwards the 0, the virtio
notifications are disabled and the function is not re-scheduled, waiting
for the backend to be ready.
When the socket netdev backend is again able to send packets, the poll
function re-starts to flush remaining packets. This is done by
calling virtio_net_tx_complete(). It re-enables notifications and calls
again virtio_net_flush_tx().
But it seems if virtio_net_flush_tx() reaches the tx_burst value all
the queue is not flushed and no new notification is sent to re-schedule
virtio_net_tx_bh(). Nothing re-start to flush the queue and remaining
packets are stuck in the queue.
To fix that, detect in virtio_net_tx_complete() if virtio_net_flush_tx()
has been stopped by tx_burst and if yes re-schedule the bottom half
function virtio_net_tx_bh() to flush the remaining packets.
This is what is done in virtio_net_tx_bh() when the virtio_net_flush_tx()
is synchronous, and completly by-passed when the operation needs to be
asynchronous.
Fixes: a697a334b3 ("virtio-net: Introduce a new bottom half packet TX")
Cc: alex.williamson@redhat.com
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This is the first step towards moving all device config size calculation
logic into the virtio core code. In particular, this adds a struct that
contains all the necessary information for common virtio code to be able
to calculate the final config size for a device. This is expected to be
used with the new virtio_get_config_size helper, which calculates the
final length based on the provided host features.
This builds on top of already existing code like VirtIOFeature and
virtio_feature_get_config_size(), but adds additional fields, as well as
sanity checking so that device-specifc code doesn't have to duplicate it.
An example usage would be:
static const VirtIOFeature dev_features[] = {
{.flags = 1ULL << FEATURE_1_BIT,
.end = endof(struct virtio_dev_config, feature_1)},
{.flags = 1ULL << FEATURE_2_BIT,
.end = endof(struct virtio_dev_config, feature_2)},
{}
};
static const VirtIOConfigSizeParams dev_cfg_size_params = {
.min_size = DEV_BASE_CONFIG_SIZE,
.max_size = sizeof(struct virtio_dev_config),
.feature_sizes = dev_features
};
// code inside my_dev_device_realize()
size_t config_size = virtio_get_config_size(&dev_cfg_size_params,
host_features);
virtio_init(vdev, VIRTIO_ID_MYDEV, config_size);
Currently every device is expected to write its own boilerplate from the
example above in device_realize(), however, the next step of this
transition is moving VirtIOConfigSizeParams into VirtioDeviceClass,
so that it can be done automatically by the virtio initialization code.
All of the users of virtio_feature_get_config_size have been converted
to use virtio_get_config_size so it's no longer needed and is removed
with this commit.
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Message-Id: <20220906073111.353245-2-d-tatianin@yandex-team.ru>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It was returned as error before. Instead of it, simply update the
corresponding field so qemu can send it in the migration data.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Si-Wei Liu <si-wei.liu@oracle.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
