target/hppa: Fix boot and reboot for SMP machines
Fix some SMP-related boot and reboot issues with HP-UX and Linux by
correctly initializing the CPU PSW bits, disabling data and instruction
translations and unhalting the CPU in the qemu hppa_machine_reset()
function.
To work correctly some fixes are needed in the SeaBIOS-hppa firmware too,
which is why this series updates it to version 8 which includes those
fixes and enhancements:
Fixes
- boot of HP-UX with SMP, and
- reboot of Linux and HP-UX with SMP
Enhancements:
- show qemu version in boot menu
- adds exit menu entry in boot menu to quit emulation
- allow to trace PCD_CHASSIS codes more specifically
Signed-off-by: Helge Deller <deller@gmx.de>
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZJbYWAAKCRD3ErUQojoP
# X6ExAQCmOXqwJw3SjSE/+hvphJ2mMTJe3i6dU3AWOGlACxxVzAEA7dKSU4d8EtRj
# NZpGKB9NE9eWwQFGJVbVgFeikap44gs=
# =8zCK
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 24 Jun 2023 01:49:44 PM CEST
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* tag 'hppa-boot-reboot-fixes-pull-request' of https://github.com/hdeller/qemu-hppa:
target/hppa: Update to SeaBIOS-hppa version 8
target/hppa: Provide qemu version via fw_cfg to firmware
target/hppa: Fix OS reboot issues
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Give current QEMU version string to SeaBIOS-hppa via fw_cfg interface so
that the firmware can show the QEMU version in the boot menu info.
Signed-off-by: Helge Deller <deller@gmx.de>
When the OS triggers a reboot, the reset helper function sends a
qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET) together with an
EXCP_HLT exception to halt the CPUs.
So, at reboot when initializing the CPUs again, make sure to set all
instruction pointers to the firmware entry point, disable any interrupts,
disable data and instruction translations, enable PSW_Q bit and tell qemu
to unhalt (halted=0) the CPUs again.
This fixes the various reboot issues which were seen when rebooting a
Linux VM, including the case where even the monarch CPU has been virtually
halted from the OS (e.g. via "chcpu -d 0" inside the Linux VM).
Signed-off-by: Helge Deller <deller@gmx.de>
Analysis of the MacOS toolbox ROM code shows that on startup it attempts 2
separate reads of the seconds registers with commands 0x9d...0x91 followed by
0x8d..0x81 without resetting the command to its initial value. The PRAM seconds
value is only accepted when the values of the 2 separate reads match.
From this we conclude that bit 4 of the rtc command is not decoded or we don't
care about its value when reading the PRAM seconds registers. Implement this
decoding change so that both reads return successfully which allows the MacOS
toolbox ROM to correctly set the date/time.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20230621085353.113233-25-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The current use of aliased memory regions causes us 2 problems: firstly the
output of "info qom-tree" is absolutely huge and difficult to read, and
secondly we have already reached the internal limit for memory regions as
adding any new memory region into the mac-io region causes QEMU to assert
with "phys_section_add: Assertion `map->sections_nb < TARGET_PAGE_SIZE'
failed".
Implement the mac-io region aliasing using a single IO memory region that
applies IO_SLICE_MASK representing the maximum size of the aliased region and
then forwarding the access to the existing mac-io memory region using the
address space API.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20230621085353.113233-12-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We use the user_ss[] array to hold the user emulation sources,
and the softmmu_ss[] array to hold the system emulation ones.
Hold the latter in the 'system_ss[]' array for parity with user
emulation.
Mechanical change doing:
$ sed -i -e s/softmmu_ss/system_ss/g $(git grep -l softmmu_ss)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-10-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The Linux kernel added a flood check for RX data recently in commit
496a4471b7c3 ("serial: imx: work-around for hardware RX flood"). This
check uses the wake bit in the UART status register 2. The wake bit
indicates that the receiver detected a start bit on the RX line. If the
kernel sees a number of RX interrupts without the wake bit being set, it
treats this as spurious data and resets the UART port. imx_serial does
never set the wake bit and triggers the kernel's flood check.
This patch adds support for the wake bit. wake is set when we receive a
new character (it's not set for break events). It seems that wake is
cleared by the kernel driver, the hardware does not have to clear it
automatically after data was read.
The wake bit can be configured as an interrupt source. Support this
mechanism as well.
Co-developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The nrf51_timer has a free-running counter which we implement using
the pattern of using two fields (update_counter_ns, counter) to track
the last point at which we calculated the counter value, and the
counter value at that time. Then we can find the current counter
value by converting the difference in wall-clock time between then
and now to a tick count that we need to add to the counter value.
Unfortunately the nrf51_timer's implementation of this has a bug
which means it loses time every time update_counter() is called.
After updating s->counter it always sets s->update_counter_ns to
'now', even though the actual point when s->counter hit the new value
will be some point in the past (half a tick, say). In the worst case
(guest code in a tight loop reading the counter, icount mode) the
counter is continually queried less than a tick after it was last
read, so s->counter never advances but s->update_counter_ns does, and
the guest never makes forward progress.
The fix for this is to only advance update_counter_ns to the
timestamp of the last tick, not all the way to 'now'. (This is the
pattern used in hw/misc/mps2-fpgaio.c's counter.)
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-id: 20230606134917.3782215-1-peter.maydell@linaro.org
QEMU allows qemu_irq lines to transfer arbitrary integers. However
the convention is that for a simple IRQ line the values transferred
are always 0 and 1. The A10 SD controller device instead assumes a
0-vs-non-0 convention, which happens to work with the interrupt
controller it is wired up to.
Coerce the value to boolean to follow our usual convention.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20230606104609.3692557-3-peter.maydell@linaro.org
In commit 2c5fa0778c we fixed an endianness bug in the Allwinner
A10 PIC model; however in the process we introduced a regression.
This is because the old code was robust against the incoming 'level'
argument being something other than 0 or 1, whereas the new code was
not.
In particular, the allwinner-sdhost code treats its IRQ line
as 0-vs-non-0 rather than 0-vs-1, so when the SD controller
set its IRQ line for any reason other than transmit the
interrupt controller would ignore it. The observed effect
was a guest timeout when rebooting the guest kernel.
Handle level values other than 0 or 1, to restore the old
behaviour.
Fixes: 2c5fa0778c ("hw/intc/allwinner-a10-pic: Don't use set_bit()/clear_bit()")
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20230606104609.3692557-2-peter.maydell@linaro.org
pull-loongarch-20230616
# -----BEGIN PGP SIGNATURE-----
#
# iLMEAAEIAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZIwysgAKCRBAov/yOSY+
# 39FYA/465KtY2jDt4xG6AdwZDHckfxZQWlrfhyZvtapOkUG4AprOBV2nSS/ukyD4
# V8bg2/6cLS0GRKfDsqA3DcxSASWCAggIU4fTSj+DlYOZhNUIq14qzwqciZnO5CIH
# QDczSqu2LKRdP9j6MCtzIaZq/8pPDcOlgm7Dyct/kDo/64E2sg==
# =rD4j
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 16 Jun 2023 12:00:18 PM CEST
# gpg: using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C 6C2C 40A2 FFF2 3926 3EDF
* tag 'pull-loongarch-20230616' of https://gitlab.com/gaosong/qemu:
target/loongarch: Fix CSR.DMW0-3.VSEG check
hw/loongarch: Supplement cpu topology arguments
hw/loongarch: Add numa support
hw/intc: Set physical cpuid route for LoongArch ipi device
hw/loongarch/virt: Add cpu arch_id support
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
xenpvh5
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCgAdFiEE0E4zq6UfZ7oH0wrqiU+PSHDhrpAFAmSLo0QACgkQiU+PSHDh
# rpB1Gw/9H5Cx7wQZVyKfFwnyOoP2QTedCISxC0HL5qFmUGcJY21gXaJZ10JaU/HM
# zHEJj2M17EgVCTkZVqZeKuj+nzyjbRKatT3YmFqKqFNNt5M1yQxC9BfVgso4PND/
# SY0/8BvqumgJEqD3sf76KbQAILKwahPtA42LTM7S7r2ZsmQpvmOpdOhCVugpnqs/
# FheP8N6hdlZ7GnRGtXv9QnKxMVThuE3mRCUWCyYsV/Roz6uvPsvskrdSeC3LzzBd
# Ewq56vB+qQg+WbNTgK2BcVOzV/89k9tjWsUnamfhjD2lUxfHrne1FBclhKMcHhUv
# T53zjhxjlRfmzUxC4917Krt4Tw/AaDW7v1pn6RokUq5U059Wb8q0IjzL75FOeD3o
# e9DNp+RR8py44ejfi2WHR7jqayMPVIO86uJ3usshiZ9YgK5efFAtlwN/KNR5JX8k
# Y1BR9O8BebtRymljtiLWUFXlu3xywGSA23KotT7XtzXKEaTZkIHdI395YKksYPkG
# pil0C0bh5ZW3ZWd4M/CNcVOb69R53p15O77mjmKtjnkQYJAPD6Kbc9thZ1zdWwPR
# ivFPdiTJb0FElS0ywZwezKYRKXje6E9ejXgAzgFuZI/rFdeO0HfkifiNoro1NAxK
# g4V+LE5oPt09GpL2nuHrh/y9g9MnLlXyNBhPV0CRelU6fPKIk1w=
# =543t
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 16 Jun 2023 01:48:20 AM CEST
# gpg: using RSA key D04E33ABA51F67BA07D30AEA894F8F4870E1AE90
# gpg: Good signature from "Stefano Stabellini <sstabellini@kernel.org>" [unknown]
# gpg: aka "Stefano Stabellini <stefano.stabellini@eu.citrix.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: D04E 33AB A51F 67BA 07D3 0AEA 894F 8F48 70E1 AE90
* tag 'xenpvh5-tag' of https://gitlab.com/sstabellini/qemu:
test/qtest: add xepvh to skip list for qtest
meson.build: enable xenpv machine build for ARM
hw/arm: introduce xenpvh machine
meson.build: do not set have_xen_pci_passthrough for aarch64 targets
hw/xen/xen-hvm-common: Use g_new and error_report
hw/xen/xen-hvm-common: skip ioreq creation on ioreq registration failure
include/hw/xen/xen_common: return error from xen_create_ioreq_server
xen-hvm: reorganize xen-hvm and move common function to xen-hvm-common
hw/i386/xen/xen-hvm: move x86-specific fields out of XenIOState
hw/i386/xen: rearrange xen_hvm_init_pc
hw/i386/xen/: move xen-mapcache.c to hw/xen/
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add a new machine xenpvh which creates a IOREQ server to register/connect with
Xen Hypervisor.
Optional: When CONFIG_TPM is enabled, it also creates a tpm-tis-device, adds a
TPM emulator and connects to swtpm running on host machine via chardev socket
and support TPM functionalities for a guest domain.
Extra command line for aarch64 xenpvh QEMU to connect to swtpm:
-chardev socket,id=chrtpm,path=/tmp/myvtpm2/swtpm-sock \
-tpmdev emulator,id=tpm0,chardev=chrtpm \
-machine tpm-base-addr=0x0c000000 \
swtpm implements a TPM software emulator(TPM 1.2 & TPM 2) built on libtpms and
provides access to TPM functionality over socket, chardev and CUSE interface.
Github repo: https://github.com/stefanberger/swtpm
Example for starting swtpm on host machine:
mkdir /tmp/vtpm2
swtpm socket --tpmstate dir=/tmp/vtpm2 \
--ctrl type=unixio,path=/tmp/vtpm2/swtpm-sock &
Signed-off-by: Vikram Garhwal <vikram.garhwal@amd.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
On ARM it is possible to have a functioning xenpv machine with only the
PV backends and no IOREQ server. If the IOREQ server creation fails continue
to the PV backends initialization.
Also, moved the IOREQ registration and mapping subroutine to new function
xen_do_ioreq_register().
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Signed-off-by: Vikram Garhwal <vikram.garhwal@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Paul Durrant <paul@xen.org>
This patch does following:
1. creates arch_handle_ioreq() and arch_xen_set_memory(). This is done in
preparation for moving most of xen-hvm code to an arch-neutral location,
move the x86-specific portion of xen_set_memory to arch_xen_set_memory.
Also, move handle_vmport_ioreq to arch_handle_ioreq.
2. Pure code movement: move common functions to hw/xen/xen-hvm-common.c
Extract common functionalities from hw/i386/xen/xen-hvm.c and move them to
hw/xen/xen-hvm-common.c. These common functions are useful for creating
an IOREQ server.
xen_hvm_init_pc() contains the architecture independent code for creating
and mapping a IOREQ server, connecting memory and IO listeners, initializing
a xen bus and registering backends. Moved this common xen code to a new
function xen_register_ioreq() which can be used by both x86 and ARM machines.
Following functions are moved to hw/xen/xen-hvm-common.c:
xen_vcpu_eport(), xen_vcpu_ioreq(), xen_ram_alloc(), xen_set_memory(),
xen_region_add(), xen_region_del(), xen_io_add(), xen_io_del(),
xen_device_realize(), xen_device_unrealize(),
cpu_get_ioreq_from_shared_memory(), cpu_get_ioreq(), do_inp(),
do_outp(), rw_phys_req_item(), read_phys_req_item(),
write_phys_req_item(), cpu_ioreq_pio(), cpu_ioreq_move(),
cpu_ioreq_config(), handle_ioreq(), handle_buffered_iopage(),
handle_buffered_io(), cpu_handle_ioreq(), xen_main_loop_prepare(),
xen_hvm_change_state_handler(), xen_exit_notifier(),
xen_map_ioreq_server(), destroy_hvm_domain() and
xen_shutdown_fatal_error()
3. Removed static type from below functions:
1. xen_region_add()
2. xen_region_del()
3. xen_io_add()
4. xen_io_del()
5. xen_device_realize()
6. xen_device_unrealize()
7. xen_hvm_change_state_handler()
8. cpu_ioreq_pio()
9. xen_exit_notifier()
4. Replace TARGET_PAGE_SIZE with XC_PAGE_SIZE to match the page side with Xen.
Signed-off-by: Vikram Garhwal <vikram.garhwal@amd.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
In preparation to moving most of xen-hvm code to an arch-neutral location, move:
- shared_vmport_page
- log_for_dirtybit
- dirty_bitmap
- suspend
- wakeup
out of XenIOState struct as these are only used on x86, especially the ones
related to dirty logging.
Updated XenIOState can be used for both aarch64 and x86.
Also, remove free_phys_offset as it was unused.
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Signed-off-by: Vikram Garhwal <vikram.garhwal@amd.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
In preparation to moving most of xen-hvm code to an arch-neutral location,
move non IOREQ references to:
- xen_get_vmport_regs_pfn
- xen_suspend_notifier
- xen_wakeup_notifier
- xen_ram_init
towards the end of the xen_hvm_init_pc() function.
This is done to keep the common ioreq functions in one place which will be
moved to new function in next patch in order to make it common to both x86 and
aarch64 machines.
Signed-off-by: Vikram Garhwal <vikram.garhwal@amd.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Reviewed-by: Paul Durrant <paul@xen.org>
