Adjust the interface to match what has been done to the
TCGv_i32 load/store functions.
This is less obvious, because at present the only user of
these functions, trans_VLDST_multiple, also wants to manipulate
the endianness to speed up loading multiple bytes. Thus we
retain an "internal" interface which is identical to the
current gen_aa32_{ld,st}_i64 interface.
The "new" interface will gain users as we remove the legacy
interfaces, gen_aa32_ld64 and gen_aa32_st64.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-15-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Create a finalize_memop function that computes alignment and
endianness and returns the final MemOp for the operation.
Split out gen_aa32_{ld,st}_internal_i32 which bypasses any special
handling of endianness or alignment. Adjust gen_aa32_{ld,st}_i32
so that s->be_data is not added by the callers.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210419202257.161730-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The log2_esize parameter is not used except trivially.
Drop the parameter and the deferral to gen_mte_check1.
This fixes a bug in that the parameters as documented
in the header file were the reverse from those in the
implementation. Which meant that translate-sve.c was
passing the parameters in the wrong order.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210416183106.1516563-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
After recent changes, mte_checkN does not use ESIZE,
and mte_check1 never used TSIZE. We can combine the
two into a single field: SIZEM1.
Choose to pass size - 1 because size == 0 is never used,
our immediate need in mte_probe_int is for the address
of the last byte (ptr + size - 1), and since almost all
operations are powers of 2, this makes the immediate
constant one bit smaller.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210416183106.1516563-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We were incorrectly assuming that only the first byte of an MTE access
is checked against the tags. But per the ARM, unaligned accesses are
pre-decomposed into single-byte accesses. So by the time we reach the
actual MTE check in the ARM pseudocode, all accesses are aligned.
We cannot tell a priori whether or not a given scalar access is aligned,
therefore we must at least check. Use mte_probe_int, which is already
set up for checking multiple granules.
Buglink: https://bugs.launchpad.net/bugs/1921948
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210416183106.1516563-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We were incorrectly assuming that only the first byte of an MTE access
is checked against the tags. But per the ARM, unaligned accesses are
pre-decomposed into single-byte accesses. So by the time we reach the
actual MTE check in the ARM pseudocode, all accesses are aligned.
Therefore, the first failure is always either the first byte of the
access, or the first byte of the granule.
In addition, some of the arithmetic is off for last-first -> count.
This does not become directly visible until a later patch that passes
single bytes into this function, so ptr == ptr_last.
Buglink: https://bugs.launchpad.net/bugs/1921948
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210416183106.1516563-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweaked a comment]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Arm ARM specifies that for Thumb encodings of the various plain
store insns, if the Rn field is 1111 then we must UNDEF. This is
different from the Arm encodings, where this case is either
UNPREDICTABLE or has well-defined behaviour. The exclusive stores,
store-release and STRD do not have this UNDEF case for any encoding.
Enforce the UNDEF for this case in the Thumb plain store insns.
Fixes: https://bugs.launchpad.net/qemu/+bug/1922887
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210408162402.5822-1-peter.maydell@linaro.org
The driver can query some bits in SMMUv3 IDR5 to learn which
translation granules are supported. Arm recommends that SMMUv3
implementations support at least 4K and 64K granules. But in
the vSMMUv3, there seems to be no reason not to support 16K
translation granule. In addition, if 16K is not supported,
vSVA will failed to be enabled in the future for 16K guest
kernel. So it'd better to support it.
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 1901b4967c changed the nvme device from using a bar exclusive
for MSI-x to sharing it on bar0.
Unfortunately, the msix_uninit_exclusive_bar() call remains in
nvme_exit() which causes havoc when the device is removed with, say,
device_del. Fix this.
Additionally, a subregion is added but it is not removed on exit which
causes a reference to linger and the drive to never be unlocked.
Fixes: 1901b4967c ("hw/block/nvme: move msix table and pba to BAR 0")
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There could be case that peer is NULL. This can happen when during
network device hot-add where net device needs to be added first. So
the patch check the existence of peer before trying to do the pad.
Fixes: 969e50b61a ("net: Pad short frames to minimum size before sending from SLiRP/TAP")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-id: 20210423031803.1479-1-jasowang@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When adding this file and its new content in commit 3f7a927847
("target/mips: LSA/DLSA R6 decodetree helpers") I did 2 mistakes:
1: Listed authors who haven't been involved in its development,
2: Used an incorrect GNU GPLv2 license text (using 'and' instead
of 'or').
Instead of correcting the GNU GPLv2 license text, replace the license
by the 'GNU LGPL v2.1 or later' one, to be coherent with the other
translation files in the target/mips/ folder.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210420100633.1752440-1-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Result @blocked is true when and only when result @blocked-reasons is
present. It's always non-empty when present. @blocked is redundant.
It was introduced in commit 3af8554bd0 "migration: Add blocker
information", and has not been released. This gives us a chance to
fix the interface with minimal fuss.
Unfortunately, we're already too close to the release to risk dropping
it. Deprecate it instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 20210420051907.891470-1-armbru@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fixes for rc4:
* Fix compile failures of C++ files with new glib headers
* mps3-an547: Use correct Cortex-M55 CPU and don't disable its FPU
* accel/tcg: Fix assertion failure executing from non-RAM with -icount
# gpg: Signature made Sat 17 Apr 2021 20:39:58 BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20210417:
accel/tcg: avoid re-translating one-shot instructions
target/arm: drop CF_LAST_IO/dc->condjump check
hw/arm/armsse: Make SSE-300 use Cortex-M55
hw/arm/armsse: Give SSE-300 its own Property array
include/qemu/osdep.h: Move system includes to top
osdep: protect qemu/osdep.h with extern "C"
osdep: include glib-compat.h before other QEMU headers
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
