CONFIG_TPM is defined to a rather weird $(CONFIG_SOFTMMU) so that it
expands to the right thing in hw/Makefile.objs. This however is not
needed anymore and it has a corresponding hack in create_config
to turn it into "#define CONFIG_TPM 1". Clean up.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Copy and pasting from Thunderbird's "view source" window results in double
encoding of multibyte UTF-8 sequences. The appearance of those sequences is
very peculiar, so detect it and give an error despite the (low) possibility
of false positives.
As the major offender, I am also adding the same check to my applypatch-msg
and commit-msg hooks, but this will also cause patchew to croak loudly when
this mistake happens.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1558099140-53240-1-git-send-email-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Bugfixes.
# gpg: Signature made Fri 05 Jul 2019 21:21:52 BST
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream:
ioapic: use irq number instead of vector in ioapic_eoi_broadcast
hw/i386: Fix linker error when ISAPC is disabled
Makefile: generate header file with the list of devices enabled
target/i386: kvm: Fix when nested state is needed for migration
minikconf: do not include variables from MINIKCONF_ARGS in config-all-devices.mak
target/i386: fix feature check in hyperv-stub.c
ioapic: clear irq_eoi when updating the ioapic redirect table entry
intel_iommu: Fix unexpected unmaps during global unmap
intel_iommu: Fix incorrect "end" for vtd_address_space_unmap
i386/kvm: Fix build with -m32
checkpatch: do not warn for multiline parenthesized returned value
pc: fix possible NULL pointer dereference in pc_machine_get_device_memory_region_size()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When minikconf writes config-devices.mak, it includes all variables including
those from MINIKCONF_ARGS. This causes values from config-host.mak to "stick" to
the ones used in generating config-devices.mak, because config-devices.mak is
included after config-host.mak. Avoid this by omitting assignments coming
from the command line in the output of minikconf.
Reported-by: Christophe de Dinechin <dinechin@redhat.com>
Reviewed-by: Christophe de Dinechin <dinechin@redhat.com>
Tested-by: Christophe de Dinechin <dinechin@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It's not obvious that something named __init__.py actually houses
important code that isn't relevant to python packaging glue. Move the
QEMUMachine and related error classes out into their own module.
Adjust users to the new import location.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20190627212816.27298-2-jsnow@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Use git archive to create tarballs of qemu and submodules instead of
cloning the repository and the submodules. This is a order of magnitude
faster because it doesn't fetch the submodules from the internet each
time the script runs.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190520124716.30472-2-kraxel@redhat.com>
[AJB: fixed up tabs]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
QAPIDoc uses a state machine to for processing of documentation lines.
Its state is encoded as an enum QAPIDoc._state (well, as enum-like
class actually, thanks to our infatuation with Python 2).
All we ever do with the state is calling the state's function to
process a line of documentation. The enum values effectively serve as
handles for the functions.
Eliminate the rather wordy indirection: store the function to call in
QAPIDoc._append_line. Update and improve comments.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190606153803.5278-8-armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
[Commit message typo fixed]
Documentation comments follow a certain structure: First, we have a text
with a general description (called QAPIDoc.body). After this,
descriptions of the arguments follow. Finally, we have a part that
contains various named sections.
The code doesn't show this structure, but just checks various attributes
that indicate indirectly which part is being processed, so it happens to
do the right set of things in the right phase. This is hard to follow,
and adding support for documentation of features would be even harder.
This patch restructures the code so that the three parts are clearly
separated. The code becomes a bit longer, but easier to follow. The
resulting output remains unchanged.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20190606153803.5278-5-armbru@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Sometimes, the behaviour of QEMU changes without a change in the QMP
syntax (usually by allowing values or operations that previously
resulted in an error). QMP clients may still need to know whether
they can rely on the changed behavior.
Let's add feature flags to the QAPI schema language, so that we can make
such changes visible with schema introspection.
An example for a schema definition using feature flags looks like this:
{ 'struct': 'TestType',
'data': { 'number': 'int' },
'features': [ 'allow-negative-numbers' ] }
Introspection information then looks like this:
{ "name": "TestType", "meta-type": "object",
"members": [
{ "name": "number", "type": "int" } ],
"features": [ "allow-negative-numbers" ] }
This patch implements feature flags only for struct types. We'll
implement them more widely as needed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20190606153803.5278-2-armbru@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
clean-header-guards.pl fails to recognize a header guard #endif when
it's followed by a // comment, or multiple comments. Fix that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190604181618.19980-3-armbru@redhat.com>
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
target-arm queue:
* Stop using variable length array in dc_zva
* Implement M-profile XPSR GE bits
* Don't enable ARMV7M_EXCP_DEBUG from reset
* armv7m_nvic: NS BFAR and BFSR are RAZ/WI if BFHFNMINS == 0
* armv7m_nvic: Check subpriority in nvic_recompute_state_secure()
* fix various minor issues to allow building for Windows-on-ARM64
* aspeed: Set SDRAM size
* Allow system registers for KVM guests to be changed by QEMU code
* raspi: Diagnose requests for too much RAM
* virt: Support firmware configuration with -blockdev
# gpg: Signature made Tue 07 May 2019 12:59:30 BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20190507:
target/arm: Stop using variable length array in dc_zva
target/arm: Implement XPSR GE bits
hw/intc/armv7m_nvic: Don't enable ARMV7M_EXCP_DEBUG from reset
hw/intc/armv7m_nvic: NS BFAR and BFSR are RAZ/WI if BFHFNMINS == 0
hw/arm/armv7m_nvic: Check subpriority in nvic_recompute_state_secure()
osdep: Fix mingw compilation regarding stdio formats
util/cacheinfo: Use uint64_t on LLP64 model to satisfy Windows ARM64
qga: Fix mingw compilation warnings on enum conversion
QEMU_PACKED: Remove gcc_struct attribute in Windows non x86 targets
arm: aspeed: Set SDRAM size
arm: Allow system registers for KVM guests to be changed by QEMU code
hw/arm/raspi: Diagnose requests for too much RAM
hw/arm/virt: Support firmware configuration with -blockdev
pflash_cfi01: New pflash_cfi01_legacy_drive()
pc: Rearrange pc_system_firmware_init()'s legacy -drive loop
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Assuming that the ISA clearly describes how to determine
the length of the instruction, and the ISA has a reasonable
maximum instruction length, the input to the decoder can be
right-justified in an appropriate insn word.
This is not 100% convenient, as out-of-line %fields are
numbered relative to the maximum instruction length, but
this appears to still be usable.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
target/hppa/trace-events only contains disabled events, resulting in a
trace-dtrace.dtrace file that says "provider qemu {}". SystemTap's
dtrace(1) tool prints a warning when processing this input file.
This patch avoids the error by emitting an empty file instead of
"provider qemu {}" when there are no enabled trace events.
Fixes: 23c3d569f4 ("target/hppa: add TLB trace events")
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Message-id: 20190321170831.6539-3-stefanha@redhat.com
Message-Id: <20190321170831.6539-3-stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The result of this typo would be that "select_foo" would be treated as a "select"
keyword followed by "_foo". Nothing too bad, but easy to fix so let's be clean.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In commit d0dead3b6d we changed to shipping the u-boot
sources as a tarball, to work around a problem where they
contained a file and directory that had the same name except
for case, which was preventing QEMU's source tarball being
unpacked on case-insensitive filesystems.
In commit f2a3b549e3 we updated our u-boot blob
and sources to v2019.01, which no longer has this problem,
so we can finally remove our workaround (effectively
reverting d0dead3b6d).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Message-id: 20190314155628.8822-1-peter.maydell@linaro.org
Break out documentation to docs/devel/.
Add support for pattern groups.
Other misc cleanups for multiple decode functions.
# gpg: Signature made Tue 12 Mar 2019 16:59:37 GMT
# gpg: using RSA key 64DF38E8AF7E215F
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* remotes/rth/tags/pull-dt-20190312:
decodetree: Properly diagnose fields overflowing an insn
decodetree: Prefix extract function names with decode_function
decodetree: Allow +- to begin a number initializing a field
decodetree: Produce clean output for an empty input file
decodetree: Add --static-decode option
test/decode: Add tests for PatternGroups
decodetree: Allow grouping of overlapping patterns
decodetree: Do not unconditionaly return from Pattern.output_code
decodetree: Ensure build_tree does not include values outside insnmask
decodetree: Document the usefulness of argument sets
decodetree: Move documentation to docs/devel/decodetree.rst
MAINTAINERS: Add scripts/decodetree.py to the TCG section
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Previously this would result in an exception for shifting
the field mask by a negative number.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is interesting for bisection, where an output file is plumbed,
but does not yet have patterns.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
As a consequence, the 'return false' gets pushed up one level.
This will allow us to perform some other action when the
translator returns failure.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
I'm the sole author (aside from a one line by Greg fixing encoding)
and I was asked nicely on IRC to bring it into line with the rest of
the files.
Cc: Greg Kurz <groug@kaod.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
qemu-gdb.py was committed after 2012-01-13, so the notice about
GPL v2-only contributions does not apply.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Apart from defconfig (which is a no-op),
allyesconfig/allnoconfig/randcondfig can be implemented simply by ignoring
the RHS of assignments and "default" statements. The RHS is replaced
respectively by "true", "false" or a random value.
However, allyesconfig and randconfig do not quite work, because all the
files for hw/ARCH/Kconfig are sourced and therefore you could end up
enabling some ARM boards in x86 or things like that. This is left for
future work, but I am leaving it in to help debugging minikconf itself.
allnoconfig mode is tied to a new configure option, --without-default-devices.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The make_device_config.sh script is replaced by minikconf, which
is modified to support the same command line as its predecessor.
The roots of the parsing are default-configs/*.mak, Kconfig.host and
hw/Kconfig. One difference with make_device_config.sh is that all symbols
have to be defined in a Kconfig file, including those coming from the
configure script. This is the reason for the Kconfig.host file introduced
in the previous patch. Whenever a file in default-configs/*.mak used
$(...) to refer to a config-host.mak symbol, this is replaced by a
Kconfig dependency; this part must be done already in this patch
for bisectability.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190123065618.3520-28-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
