It's easy to accidentally define two cpregs which both try
to reset the same underlying state field (for instance a
clash between an AArch64 EL3 definition and an AArch32
banked register definition). if the two definitions disagree
about the reset value then the result is dependent on which
one happened to be reached last in the hashtable enumeration.
Add a consistency check to detect and assert in these cases:
after reset, we run a second pass where we check that the
reset operation doesn't change the value of the register.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1436797559-20835-1-git-send-email-peter.maydell@linaro.org
The SCTLR_EL3 cpreg definition was implicitly resetting the
register state to 0, which is both wrong and clashes with
the reset done via the SCTLR definition (since sctlr[3]
is unioned with sctlr_s). This went unnoticed until recently,
when an unrelated change (commit a903c449b4) happened to
perturb the order of enumeration through the cpregs hashtable for
reset such that the erroneous reset happened after the correct one
rather than before it. Fix this by marking SCTLR_EL3 as an alias,
so its reset is left up to the AArch32 view.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Remove semihosting_enabled and semihosting_target and replace them with
SemihostingConfig structure containing equivalent fields. The structure
is defined in vl.c where it is actually set.
Also introduce separate header file include/exec/semihost.h allowing to
access semihosting config related stuff from target specific semihosting
code.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1434643256-16858-2-git-send-email-leon.alrae@imgtec.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
cp_reg_reset() is called from g_hash_table_foreach() which does not
define a specific ordering of the hash table iteration. Thus doing reset
for registers marked as ALIAS would give an ambiguous result when
resetvalue is different for original and alias registers. Exit
cp_reg_reset() early when passed an alias register. Then clean up alias
register definitions from needless resetvalue and resetfn.
In particular, this fixes a bug in the handling of the PMCR register,
which had different resetvalues for its 32 and 64-bit views.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1434554713-10220-1-git-send-email-serge.fdrv@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When we're using KVM, the kernel's internal idea of the MPIDR
affinity fields must match the values we tell it for the guest
vcpu cluster configuration in the device tree. Since at the moment
the kernel doesn't support letting userspace tell it the correct
affinity fields to use, we must read the kernel's view and
reflect that back in the device tree.
Signed-off-by: Shlomo Pongratz <shlomo.pongratz@huawei.com>
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Message-id: 02f601d0a1e6$90c7d630$b2578290$@samsung.com
[PMM: Use a local #define rather than a global variable for
the TCG ARM_CPUS_PER_CLUSTER setting. Tweak a comment. Update the
commit message.]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The old ARMv5-style page table format includes a kind of second level
descriptor named the "extended small page" format, whose primary purpose
is to allow specification of the TEX memory attribute bits on a 4K page.
This exists on ARMv6 and also (as an implementation extension) on XScale
CPUs; it's UNPREDICTABLE on v5.
We were mishandling this in two ways:
(1) we weren't implementing it for v6 (probably never noticed because
Linux will use the new-style v6 page table format there)
(2) we were not correctly setting the page_size, which is 4K, not 1K
The latter bug went unnoticed for years because the only thing which
the page_size affects is which TLB entries get flushed when the guest
does a TLB invalidate on an address in the page, and prior to commit
2f0d8631b7 we were doing a full TLB flush very frequently due to Linux's
habit of writing the SCTLR pointlessly a lot.
(We can assume that after commit 2f0d8631b7 the bug went unnoticed
for a year because nobody's actually using the Zaurus/XScale emulation...)
Report the correct page size for these descriptors, and permit them
on ARMv6 CPUs. This fixes a problem where a kernel image for Zaurus
can boot the kernel OK but gets random segfaults when it tries to
run userspace programs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1432844085-16441-1-git-send-email-peter.maydell@linaro.org
Adds CPTR_EL2/3 system registers definitions and access function.
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
[PMM: merge CPTR_EL2 and HCPTR definitions into a single
def using STATE_BOTH;
don't use readfn/writefn to implement RAZ/WI registers;
don't use accessfn for the no-EL2 CPTR_EL2;
fix cpacr_access logic to catch EL2 accesses to CPACR being
trapped to EL3;
use new CP_ACCESS_TRAP_EL[23] rather than setting
exception.target_el directly]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Updated the interrupt handling to utilize and report through the target EL
exception field. This includes consolidating and cleaning up code where
needed. Target EL is now calculated once in arm_cpu_exec_interrupt() and
do_interrupt was updated to use the target_el exception field. The
necessary code from arm_excp_target_el() was merged in where needed and the
function removed.
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1429722561-12651-4-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move the code which sets exception information out of
arm_cpu_handle_mmu_fault and into tlb_fill. tlb_fill
is the only caller which wants to raise_exception()
so it makes more sense for it to handle the whole of
the exception setup.
As part of this cleanup, move the user-mode-only
implementation function for the handle_mmu_fault CPU
method into cpu.c so we don't need to make it globally
visible, and rename the softmmu-only utility function
arm_cpu_handle_mmu_fault to arm_tlb_fill so it's clear
that it's not the same thing.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
The extra information is not yet used but it is now available.
This requires minor changes through all of the tcg backends.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Rename the field holding CPACR_EL1 system register state in AArch64
naming style.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
[PMM: also fixed a couple of missed occurrences in cpu.c]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a transaction attribute indicating that a memory access is being
done from user-mode (unprivileged). This corresponds to an equivalent
signal in ARM AMBA buses.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Factor out the page table walk memory accesses into their own function,
so that we can specify the correct S/NS memory attributes for them.
This will also provide a place to use the correct endianness and
handle the need for a stage-2 translation when virtualization is
supported.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Honour the NS bit in ARM page tables:
* when adding entries to the TLB, include the Secure/NonSecure
transaction attribute
* set the NS bit in the PAR when doing ATS operations
Note that we don't yet correctly use the NSTable bit to
cause the page table walk itself to use the right attributes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
