Store the property in a CharBackend instead of CharDriverState*. This
also replace systematically chr by chr.chr to access the
CharDriverState*. The following patches will replace it with calls to
qemu_chr_fe CharBackend functions.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-12-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If a name is provided, the same name is assigned to both the I2C
controllers. Leaving it NULL, causes names to be automatically
assigned with an ID suffix, giving unique names to each
controller. This helps us to uniquely identify each controller in the
device tree, for example when adding an I2C device.
Signed-off-by: Vijay Kumar B. <vijaykumar@zilogic.com>
Reviewed-by: Deepak S. <deepak@zilogic.com>
Message-id: 1476351885-8905-1-git-send-email-vijaykumar@zilogic.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When kernel and device tree are specified in the QEMU commandline, then
this device tree may be modified e.g. to add virtio_mmio devices.
With a bootloader e.g. on a flash device these extra devices are not
available.
With this change, the device tree can be specified at the QEMU commandline.
The modified device tree made available to the bootloader with the same
mechanism already supported by device trees fully generated by QEMU.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
Message-id: 1473520054-402-1-git-send-email-m.olbrich@pengutronix.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The SMC controllers on the Aspeed AST2500 SoC are very similar to the
ones found on the AST2400. The differences are on the number of
supported flash modules and their default mappings in the SoC address
space.
The Aspeed AST2500 has one SPI controller for the BMC firmware and two
for the host firmware. All controllers have now the same set of
registers compatible with the AST2400 FMC controller and the legacy
'SMC' controller is fully gone.
We keep the FMC object to act as the BMC SPI controller and add a new
SPI controller for the host. We also have to introduce new type names
to handle the differences in the flash modules memory mappping.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 1474977462-28032-5-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This will ease the definition of the new controllers for the AST2500
SoC and also ease the support of the segment registers, which provide
a way to reconfigure the mapping window of each slave.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 1474977462-28032-3-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Aspeed SoC has three different types of SMC (Static Memory
Controller) controllers: the SMC (legacy), the FMC (the new one) and
the SPI for the host PNOR. The FMC and the SPI models are now
converging on the AST2500 SoC and the SMC, which was still available
on the AST2400 SoC, was removed.
The Aspeed SoC does not provide support for the legacy SMC
controller. So, let's rename the 'smc' object to 'fmc' to clarify its
nature.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 1474977462-28032-2-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Replace repeated pattern
for (i = 0; i < nb_numa_nodes; i++) {
if (test_bit(idx, numa_info[i].node_cpu)) {
...
break;
with a helper function to lookup numa node index for cpu.
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Functions of type FindSysbusDeviceFunc currently return an integer.
However, this return value is always ignored by the caller in
find_sysbus_device().
This changes the function type to return void, to avoid confusion over
the function semantics.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Let's define an object class for each Aspeed SoC we support. A
AspeedSoCInfo struct gathers the SoC specifications which can later be
used by an instance of the class or by a board using the SoC.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 1473438177-26079-4-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is a name replacement to prepare ground for other SoCs.
Let's also remove the AST2400_SMC_BASE definition from the address
space mappings, as it is not used. This controller was removed from
the Aspeed SoC AST2500, so this provides us a better common base for
the address space mapping on both SoCs.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1473438177-26079-3-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The qemu_chr_fe_write method will return -1 on EAGAIN if the
chardev backend write would block. Almost no callers of the
qemu_chr_fe_write() method check the return value, instead
blindly assuming data was successfully sent. In most cases
this will lead to silent data loss on interactive consoles,
but in some cases (eg RNG EGD) it'll just cause corruption
of the protocol being spoken.
We unfortunately can't fix the virtio-console code, due to
a bug in the Linux guest drivers, which would cause the
entire Linux kernel to hang if we delay processing of the
incoming data in any way. Fixing this requires first fixing
the guest driver to not hold spinlocks while writing to the
hvc device backend.
Fixes bug: https://bugs.launchpad.net/qemu/+bug/1586756
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1473170165-540-4-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Current QEMU will stall guest VM booting under ACPI mode when vcpu count
is >= 12. Analyzing the booting log, it turns out that DSDT table can't
be loaded correctly due to "Invalid character(s) in name (0x62303043),
repaired: [C00*]". This is because existing QEMU uses a lower case AML
ID for CPU devices (e.g. C000, C001, ..., C00a, C00b). The ACPI code
inside guest VM detects this lower case character as an invalid character
(see acpi_ut_valid_acpi_char() in drivers/acpi/acpica/utstring.c file)
and converts it to "*". This causes duplicated IDs (i.e. "C00a" ==>"C00*"
and "C00b" ==> "C00*"). So ACPI refuses to load the table.
This patch fixes the problem by changing the format with a upper case
character. It matches the CPU ID formats used in other parts of QEMU
code.
Reported-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Wei Huang <wei@redhat.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Message-id: 1472852809-23042-1-git-send-email-wei@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The uboot in the previous release of the SDK was using a hardcoded
value for memory size. This is not true anymore, the value is now
retrieved from the memory controller.
Below is a model for this device, only supporting unlock and
configuration. Without it, we endup running a guest with 64MB, which
is a bit low nowdays. It uses a 'silicon-rev' property and ram_size to
build a default value. Some bits should be linked to SCU strapping
registers but it seems a bit complex to add for the current need.
The model is ready for the AST2500 SOC.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is a mostly-mechanical conversion that creates a new flat
union 'Netdev' QAPI type that covers all the branches of the
former 'NetClientOptions' simple union, where the branches are
now listed in a new 'NetClientDriver' enum rather than generated
from the simple union. The existence of a flat union has no
change to the command line syntax accepted for new code, and
will make it possible for a future patch to switch the QMP
command to parse a boxed union for no change to valid QMP; but
it does have some ripple effect on the C code when dealing with
the new types.
While making the conversion, note that the 'NetLegacy' type
remains unchanged: it applies only to legacy command line options,
and will not be ported to QMP, so it should remain a wrapper
around a simple union; to avoid confusion, the type named
'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions'
in its place. Then, in the C code, we convert from NetLegacy to
Netdev as soon as possible, so that the bulk of the net stack
only has to deal with one QAPI type, not two. Note that since
the old legacy code always rejected 'hubport', we can just omit
that branch from the new 'NetLegacyOptions' simple union.
Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>:
Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com>
although the sed script in that patch no longer applies due to
other changes in the tree since then, and I also did some manual
cleanups (such as fixing whitespace to keep checkpatch happy).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Fixup from Eric squashed in]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
AST2400_A0_SILICON_REV is defined twice. Fix this by including the
definition in the header file as well as the routine to check if a
silicon revision is supported. It will useful to reuse in other
controllers.
Let's add also AST2500_A0_SILICON_REV for future use.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 1467994016-11678-5-git-send-email-clg@kaod.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
KVM adjusts the MPIDR of guest vcpus based on the architecture of
the host, 32-bit vs. 64-bit, and, for 64-bit, also on the type of
GIC the guest is using. To be consistent and improve SGI efficiency
we make the same adjustments for TCG as 64-bit KVM hosts. We neglect
to add consistency with 32-bit KVM hosts, as that would reduce SGI
efficiency and KVM is expected to change.
As MPIDR is a system register, and thus guest visible, we only make
adjustments for current and later versioned machines.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-id: 1467378129-23302-3-git-send-email-drjones@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Considering that features are converted to global properties and
global properties are automatically applied to every new instance
of created CPU (at object_new() time), there is no point in
parsing cpu_model string every time a CPU created. So move
parsing outside CPU creation loop and do it only once.
Parsing also should be done before any CPU is created so that
features would affect the first CPU a well.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Currently CPUClass->parse_features() is used to parse -cpu
features string and set properties on created CPU instances.
But considering that features specified by -cpu apply to every
created CPU instance, it doesn't make sense to parse the same
features string for every CPU created. It also makes every target
that cares about parsing features string explicitly call
CPUClass->parse_features() parser, which gets in a way if we
consider using generic device_add for CPU hotplug as device_add
has not a clue about CPU specific hooks.
Turns out we can use global properties mechanism to set
properties on every created CPU instance for a given type. That
way it's possible to convert CPU features into a set of global
properties for CPU type specified by -cpu cpu_model and common
Device.device_post_init() will apply them to CPU of given type
automatically regardless whether it's manually created CPU or CPU
created with help of device_add.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
In various Freescale SOCs, the GPT timers can be configured to select
its input clock.
Depending on the SOC the set of available input clocks may vary.
The actual single GPT definition was no good enough and because of it
booting the sabrelite board with a i.MX6DL device tree would fail
because of an incorrect input clock definition for the i.MX6DL SOC.
This patch fixes the i.MX6DL boot failure by adding the ability to
define a different set of input clocks depending on the considered SOC.
A different class has been defined for i.MX25, i.MX31 and i.MX6 each with
its specific set of input clocks.
The patch has been tested by booting KZM, i.MX25 PDK, i.MX6Q sabrelite
and i.MX6DL sabrelite.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Message-id: 1467325619-8374-1-git-send-email-jcd@tribudubois.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: fixed spacing round '/' operator]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A set of SPI flash slaves is attached under the flash controllers of
the palmetto platform. "n25q256a" flash modules are used for the BMC
and "mx25l25635e" for the host. These types are common in the
OpenPower ecosystem.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 1467138270-32481-9-git-send-email-clg@kaod.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
