xen_piix_pci_write_config_client() is implemented in the xen sub tree and
uses PIIX constants internally, thus creating a direct dependency on
PIIX. Now that xen_set_pci_link_route() is stubbable, the logic of
xen_piix_pci_write_config_client() can be moved to PIIX which resolves
the dependency.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <20220626094656.15673-3-shentey@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
PCI interrupt wiring was performed in create() functions which are
obsolete. Move these tasks into QOM functions to modernize the code.
In order to avoid duplicate checking for xen_enabled() the realize
methods are now split.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220603185045.143789-10-shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
When QOMifying a device it is typical to use _init() as the suffix for an
instance_init function, however this name is already in use by the legacy
piix4_pm_init() wrapper function. Eventually the wrapper function will be
removed, but for now rename it to piix4_pm_initfn() to avoid a naming
collision.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220528091934.15520-7-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
replaces adhoc build_isa_devices_aml() with generic AcpiDevAmlIf
way to build bridge AML including all devices that are attached
to its ISA bus.
Later when PCI is converted to AcpiDevAmlIf, build_q35_isa_bridge()
will also be dropped since PCI parts itself will take care of
building device prologue/epilogue AML for each enumerated PCI device.
Expected AML change is contextual, where ISA devices are moved from
separately declared _SB.PCI0.ISA scope, directly under Device(ISA)
node.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220608135340.3304695-21-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
replaces ad-hoc build_isa_devices_aml() with generic AcpiDevAmlIf
way to build bridge AML including all devices that are attached to
its ISA bus.
Later when PCI is converted to AcpiDevAmlIf, build_piix4_isa_bridge()
will also be dropped since PCI parts itself will take care of
building device prologue/epilogue AML for each enumerated PCI
device.
Expected AML change is contextual, where ISA devices are moved
from separately declared _SB.PCI0.ISA scope , directly under
Device(ISA) node.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220608135340.3304695-20-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To allow incremental conversion from ISADeviceClass::build_aml
to AcpiDevAmlIf, add support for the later without removing
the former. Once conversion is complete, another commit will
drop ISADeviceClass::build_aml related code.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220608135340.3304695-3-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A global boolean variable "vga_interface_created"(declared in softmmu/globals.c)
has been used to track the creation of vga interface. If the vga flag is passed
in the command line "default_vga"(declared in softmmu/vl.c) variable is set to 0.
To warn user, the condition checks if vga_interface_created is false
and default_vga is equal to 0. If "-vga none" is passed, this patch will not warn the
user regarding the creation of VGA device.
The warning "A -vga option was passed but this
machine type does not use that option; no VGA device has been created"
is logged if vga flag is passed but no vga device is created.
This patch has been tested for x86_64, i386, sparc, sparc64 and arm boards.
Signed-off-by: Gautam Agrawal <gautamnagrawal@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/581
Message-Id: <20220501122505.29202-1-gautamnagrawal@gmail.com>
[thuth: Fix wrong warning with "-device" in some cases as reported by Paolo]
Signed-off-by: Thomas Huth <thuth@redhat.com>
All isabus_dev_print() did was to print up to two IRQ numbers per
device. This is redundant if the IRQ numbers are present as QOM
properties (see e.g. the modified tests/qemu-iotests/172.out).
Now that the last devices relying on isabus_dev_print() had their IRQ
numbers QOM'ified, the contribution of this function ultimately became
redundant. Remove it.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220301220037.76555-5-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220307134353.1950-12-philippe.mathieu.daude@gmail.com>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Exposing the IRQ number as a QOM property not only allows it to be
configurable but also to be displayed in HMP:
Before:
(qemu) info qtree
...
dev: mc146818rtc, id ""
gpio-out "" 1
base_year = 0 (0x0)
lost_tick_policy = "discard"
After:
dev: mc146818rtc, id ""
gpio-out "" 1
base_year = 0 (0x0)
irq = 8 (0x8)
lost_tick_policy = "discard"
The reason the IRQ number didn's show up before is that this device does not
call isa_init_irq().
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220301220037.76555-2-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220307134353.1950-9-philippe.mathieu.daude@gmail.com>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
This is a follow-up on patch "malta: Move PCI interrupt handling from
gt64xxx_pci to piix4". gt64xxx_pci used magic constants, and probably
didn't want to use piix4-specific constants. Now that the interrupt
handing resides in piix4, its constants can be used.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20220217101924.15347-7-shentey@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This is a follow-up on patch "malta: Move PCI interrupt handling from
gt64xxx_pci to piix4" where i8259[] was moved from MaltaState to
PIIX4State to make the code movement more obvious. However, i8259[]
seems redundant to *isa, so remove it.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20220217101924.15347-4-shentey@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
When building the Pegasos2 machine stand-alone we get:
$ qemu-system-ppc -M pegasos2 -bios pegasos2.rom
ERROR:qom/object.c:714:object_new_with_type: assertion failed: (type != NULL)
Bail out! ERROR:qom/object.c:714:object_new_with_type: assertion failed: (type != NULL)
Looking at the backtraces:
Thread 1 "qemu-system-ppc" received signal SIGABRT, Aborted.
(gdb) bt
#0 0x00007ffff53877d5 in raise () at /lib64/libc.so.6
#1 0x00007ffff5370895 in abort () at /lib64/libc.so.6
#2 0x00007ffff6dc4b6c in g_assertion_message_expr.cold () at /lib64/libglib-2.0.so.0
#3 0x00007ffff6e229ff in g_assertion_message_expr () at /lib64/libglib-2.0.so.0
#4 0x0000555555a0c8f4 in object_new_with_type (type=0x0) at qom/object.c:714
#5 0x0000555555a0c9d5 in object_new (typename=0x555555c7afe4 "isa-pit") at qom/object.c:747
#6 0x0000555555a053b8 in qdev_new (name=0x555555c7afe4 "isa-pit") at hw/core/qdev.c:153
#7 0x00005555557cdd05 in isa_new (name=0x555555c7afe4 "isa-pit") at hw/isa/isa-bus.c:160
#8 0x00005555557cf518 in i8254_pit_init (bus=0x55555603d140, base=64, isa_irq=0, alt_irq=0x0) at include/hw/timer/i8254.h:54
#9 0x00005555557d12f9 in vt8231_realize (d=0x5555563d9770, errp=0x7fffffffcc28) at hw/isa/vt82c686.c:704
(gdb) bt
#0 0x00007ffff54bd7d5 in raise () at /lib64/libc.so.6
#1 0x00007ffff54a6895 in abort () at /lib64/libc.so.6
#2 0x00005555558f7796 in object_new (typename=0x555555ad4889 "isa-parallel") at qom/object.c:749
#3 object_new (typename=type0x555555ad4889 "isa-parallel") at qom/object.c:743
#4 0x00005555558f0d46 in qdev_new (name=0x555555ad4889 "isa-parallel") at hw/core/qdev.c:153
#5 0x000055555576b669 in isa_new (name=0x555555ad4889 "isa-parallel") at hw/isa/isa-bus.c:160
#6 0x000055555576bbe8 in isa_superio_realize (dev=0x555555f15910, errp=<optimized out>) at hw/isa/isa-superio.c:54
#7 0x000055555576d5ed in via_superio_realize (d=0x555555f15910, errp=0x7fffffffcb30) at hw/isa/vt82c686.c:292
#8 0x00005555558f12c1 in device_set_realized (obj=<optimized out>, ...) at hw/core/qdev.c:761
#9 0x00005555558f5066 in property_set_bool (obj=0x555555f15910, ..., errp=0x7fffffffcbb0) at qom/object.c:2262
#10 0x00005555558f7f38 in object_property_set (obj=0x555555f15910, name=0x555555b1b1e3 "realized", ...) at qom/object.c:1407
#11 0x00005555558fb2d0 in object_property_set_qobject (obj=0x555555f15910, name=0x555555b1b1e3 "realized", ...) at qom/qom-qobject.c:28
#12 0x00005555558f8525 in object_property_set_bool (obj=0x555555f15910, name=0x555555b1b1e3 "realized", ...) at qom/object.c:1477
#13 0x00005555558f18ee in qdev_realize (dev=0x555555f15910, bus=0x55555602a610, errp=<optimized out>) at hw/core/qdev.c:389
#14 0x00005555558f197f in qdev_realize_and_unref (dev=0x555555f15910, bus=0x55555602a610, errp=<optimized out>) at hw/core/qdev.c:396
#15 0x000055555576b709 in isa_realize_and_unref (errp=<optimized out>, bus=0x55555602a610, dev=0x555555f15910) at hw/isa/isa-bus.c:179
#16 isa_create_simple (bus=0x55555602a610, name=0x555555adc33b "vt8231-superio") at hw/isa/isa-bus.c:173
#17 0x000055555576d9b7 in vt8231_realize (d=0x555556186a50, errp=<optimized out>) at hw/isa/vt82c686.c:706
The "isa-pit" type (TYPE_I8254) and "isa-parallel" are missing. Add them.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20210515173716.358295-12-philmd@redhat.com>
[PMD: Added "isa-parallel" later]
The VT82C686 device model misses various dependencies:
/usr/bin/ld: libcommon.fa.p/hw_isa_vt82c686.c.o: in function `vt82c686b_realize':
hw/isa/vt82c686.c:622: undefined reference to `i8259_init'
/usr/bin/ld: hw/isa/vt82c686.c:624: undefined reference to `i8257_dma_init'
/usr/bin/ld: hw/isa/vt82c686.c:627: undefined reference to `mc146818_rtc_init'
Add them.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20210515173716.358295-11-philmd@redhat.com>
QEMU currently crashes when the user tries to do something like:
qemu-system-x86_64 -M x-remote -device piix3-ide
This happens because the "isabus" variable is not initialized with
the x-remote machine yet. Add a proper check for this condition
and propagate the error to the caller, so we can fail there gracefully.
Message-Id: <20210416125256.2039734-1-thuth@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Commit e50caf4a5c ("tracing: convert documentation to rST")
converted docs/devel/tracing.txt to docs/devel/tracing.rst.
We still have several references to the old file, so let's fix them
with the following command:
sed -i s/tracing.txt/tracing.rst/ $(git grep -l docs/devel/tracing.txt)
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210517151702.109066-2-sgarzare@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
ppc patch queue 2021-05-04
Here's the first ppc pull request for qemu-6.1. It has a wide variety
of stuff accumulated during the 6.0 freeze. Highlights are:
* Multi-phase reset cleanups for PAPR
* Preliminary cleanups towards allowing !CONFIG_TCG for the ppc target
* Cleanup of AIL logic and extension to POWER10
* Further improvements to handling of hot unplug failures on PAPR
* Allow much larger numbers of CPU on pseries
* Support for the H_SCM_HEALTH hypercall
* Add support for the Pegasos II board
* Substantial cleanup to hflag handling
* Assorted minor fixes and cleanups
# gpg: Signature made Tue 04 May 2021 06:52:39 BST
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dg-gitlab/tags/ppc-for-6.1-20210504: (46 commits)
hw/ppc/pnv_psi: Use device_cold_reset() instead of device_legacy_reset()
hw/ppc/spapr_vio: Reset TCE table object with device_cold_reset()
hw/intc/spapr_xive: Use device_cold_reset() instead of device_legacy_reset()
target/ppc: removed VSCR from SPR registration
target/ppc: Reduce the size of ppc_spr_t
target/ppc: Clean up _spr_register et al
target/ppc: Add POWER10 exception model
target/ppc: rework AIL logic in interrupt delivery
target/ppc: move opcode table logic to translate.c
target/ppc: code motion from translate_init.c.inc to gdbstub.c
spapr_drc.c: handle hotunplug errors in drc_unisolate_logical()
spapr.h: increase FDT_MAX_SIZE
spapr.c: do not use MachineClass::max_cpus to limit CPUs
ppc: Rename current DAWR macros and variables
target/ppc: POWER10 supports scv
target/ppc: Fix POWER9 radix guest HV interrupt AIL behaviour
docs/system: ppc: Add documentation for ppce500 machine
roms/u-boot: Bump ppce500 u-boot to v2021.04 to fix broken pci support
roms/Makefile: Update ppce500 u-boot build directory name
ppc/spapr: Add support for implement support for H_SCM_HEALTH
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Trivial patches pull request 20210503
# gpg: Signature made Mon 03 May 2021 09:34:56 BST
# gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg: issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* remotes/vivier2/tags/trivial-branch-for-6.1-pull-request: (23 commits)
hw/rx/rx-gdbsim: Do not accept invalid memory size
docs: More precisely describe memory-backend-*::id's user
scripts: fix generation update-binfmts templates
docs/system: Document the removal of "compat" property for POWER CPUs
mc146818rtc: put it into the 'misc' category
Do not include exec/address-spaces.h if it's not really necessary
Do not include cpu.h if it's not really necessary
Do not include hw/boards.h if it's not really necessary
Do not include sysemu/sysemu.h if it's not really necessary
hw: Do not include qemu/log.h if it is not necessary
hw: Do not include hw/irq.h if it is not necessary
hw: Do not include hw/sysbus.h if it is not necessary
hw: Remove superfluous includes of hw/hw.h
ui: Fix memory leak in qemu_xkeymap_mapping_table()
hw/usb: Constify VMStateDescription
hw/display/qxl: Constify VMStateDescription
hw/arm: Constify VMStateDescription
vmstate: Constify some VMStateDescriptions
Fix typo in CFI build documentation
hw/pcmcia: Do not register PCMCIA type if not required
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The VT8231 south bridge is very similar to VT82C686B but there are
some differences in register addresses and functionality, e.g. the
VT8231 only has one serial port. This commit adds VT8231_SUPERIO
subclass based on the abstract VIA_SUPERIO class to emulate the
superio part of VT8231.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <8108809321f9ecf3fb1aea22ddaeccc7c3a57c8e.1616680239.git.balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
