Use the attribute, which is supported by clang, instead of
the #pragma, which is not supported and, for some reason,
also not detected by the meson probe, so we fail by -Werror.
Include only <immintrin.h> as that is the outermost "official"
header for these intrinsics -- emmintrin.h and smmintrin -- are
older SSE2 and SSE4 specific headers, while the immintrin.h
includes all of the Intel intrinsics.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This API allows the accelerators to prevent vcpus from issuing
new ioctls while execting a critical section marked with the
accel_ioctl_inhibit_begin/end functions.
Note that all functions submitting ioctls must mark where the
ioctl is being called with accel_{cpu_}ioctl_begin/end().
This API requires the caller to always hold the BQL.
API documentation is in sysemu/accel-blocker.h
Internally, it uses a QemuLockCnt together with a per-CPU QemuLockCnt
(to minimize cache line bouncing) to keep avoid that new ioctls
run when the critical section starts, and a QemuEvent to wait
that all running ioctls finish.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221111154758.1372674-2-eesposit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* s390x header clean-ups from Philippe
* Rework and improvements of the EINTR handling by Nikita
* Deprecate the -no-hpet command line option
* Disable the qtests in the 32-bit Windows CI job again
* Some other misc fixes here and there
# gpg: Signature made Mon 09 Jan 2023 14:21:19 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2023-01-09' of https://gitlab.com/thuth/qemu:
.gitlab-ci.d/windows: Do not run the qtests in the msys2-32bit job
error handling: Use RETRY_ON_EINTR() macro where applicable
Refactoring: refactor TFR() macro to RETRY_ON_EINTR()
docs/interop: Change the vnc-ledstate-Pseudo-encoding doc into .rst
i386: Deprecate the -no-hpet QEMU command line option
tests/qtest/bios-tables-test: Replace -no-hpet with hpet=off machine parameter
tests/readconfig: spice doesn't support unix socket on windows yet
target/s390x: Restrict sysemu/reset.h to system emulation
target/s390x/tcg/excp_helper: Restrict system headers to sysemu
target/s390x/tcg/misc_helper: Remove unused "memory.h" include
hw/s390x/pv: Restrict Protected Virtualization to sysemu
exec/memory: Expose memory_region_access_valid()
MAINTAINERS: Add MIPS-related docs and configs to the MIPS architecture section
tests/vm: Update get_default_jobs() to work on non-x86_64 non-KVM hosts
qemu-iotests/stream-under-throttle: do not shutdown QEMU
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When QEMU is started with `-daemonize`, all stdio descriptors get
redirected to `/dev/null`. This basically means that anything
printed with error_report() and friends is lost.
Current logging code allows to redirect to a file with `-D` but
this requires to enable some logging item with `-d` as well to
be functional.
Relax the check on the log flags when QEMU is daemonized, so that
other users of stderr can benefit from the redirection, without the
need to enable unwanted debug logs. Previous behaviour is retained
for the non-daemonized case. The logic is unrolled as an `if` for
better readability. The qemu_log_level and log_per_thread globals
reflect the state we want to transition to at this point : use
them instead of the intermediary locals for correctness.
qemu_set_log_internal() is adapted to open a per-thread log file
when '-d tid' is passed. This is done by hijacking qemu_try_lock()
which seems simpler that refactoring the code.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20221108140032.1460307-3-groug@kaod.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
log_append makes sure that if you turn off the logging (which clears
log_flags and makes need_to_open_file false) the old log is not
overwritten. The usecase is that if you remove or move the file
QEMU will not keep writing to the old file. However, this is
not always the desited behavior, in particular having log_append==1
after changing the file name makes little sense.
When qemu_set_log_internal is called from the logfile monitor
command, filename must be non-NULL and therefore changed_name must
be true. Therefore, the only case where the file is closed and
need_to_open_file == false is indeed when log_flags becomes
zero. In this case, just flush the file and do not bother
closing it, thus faking the same append behavior as previously.
The behavioral change is that changing the logfile twice, for
example log1 -> log2 -> log1, will cause log1 to be overwritten.
This can simply be documented, since it is not a particularly
surprising behavior.
Suggested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20221025092119.236224-1-pbonzini@redhat.com>
[groug: nullify global_file before actually closing the file]
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20221108140032.1460307-2-groug@kaod.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Copy and simplify the Linux kernel's interval_tree_generic.h,
instantiating for uint64_t.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Block layer patches
- Code cleanups around block graph modification
- Simplify drain
- coroutine_fn correctness fixes, including splitting generated
coroutine wrappers into co_wrapper (to be called only from
non-coroutine context) and co_wrapper_mixed (both coroutine and
non-coroutine context)
- Introduce a block graph rwlock
# gpg: Signature made Thu 15 Dec 2022 15:08:34 GMT
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* tag 'for-upstream' of https://repo.or.cz/qemu/kevin: (50 commits)
block: GRAPH_RDLOCK for functions only called by co_wrappers
block: use co_wrapper_mixed_bdrv_rdlock in functions taking the rdlock
block-coroutine-wrapper.py: introduce annotations that take the graph rdlock
Mark assert_bdrv_graph_readable/writable() GRAPH_RD/WRLOCK
graph-lock: TSA annotations for lock/unlock functions
block: assert that graph read and writes are performed correctly
block: remove unnecessary assert_bdrv_graph_writable()
block: wrlock in bdrv_replace_child_noperm
block: Fix locking in external_snapshot_prepare()
test-bdrv-drain: Fix incorrrect drain assumptions
clang-tsa: Add macros for shared locks
clang-tsa: Add TSA_ASSERT() macro
Import clang-tsa.h
async: Register/unregister aiocontext in graph lock list
graph-lock: Implement guard macros
graph-lock: Introduce a lock to protect block graph operations
block: Factor out bdrv_drain_all_begin_nopoll()
block/dirty-bitmap: convert coroutine-only functions to co_wrapper
block: convert bdrv_create to co_wrapper
block-coroutine-wrapper.py: support also basic return types
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add/remove the AioContext in aio_context_list in graph-lock.c when it is
created/destroyed. This allows using the graph locking operations from
this AioContext.
In order to allow linking util/async.c with binaries that don't include
the block layer, introduce stubs for (un)register_aiocontext().
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20221207131838.239125-5-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The comment about g_poll is not required here anymore since
the corresponding code has been removed a while ago already.
Fixes: b4c6036faa ("configure: bump min required glib version to 2.56")
Message-Id: <20221208133257.95673-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The "query-command-line-options" command uses a hand-crafted list
of options that should be returned for the "machine" parameter.
This is pretty much out of sync with reality, for example settings
like "kvm_shadow_mem" or "accel" are not parameters for the machine
anymore. Also, there is no distinction between the targets here, so
e.g. the s390x-specific values like "loadparm" in this list also
show up with the other targets like x86_64.
Let's fix this now by geting rid of the hand-crafted list and by
querying the properties of the machine classes instead to assemble
the list.
Fixes: 0a7cf217d8 ("fix regression of qmp_query_command_line_options")
Message-Id: <20221111141323.246267-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Miscellaneous patches for 2022-12-14
# gpg: Signature made Wed 14 Dec 2022 15:23:02 GMT
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* tag 'pull-misc-2022-12-14' of https://repo.or.cz/qemu/armbru:
ppc4xx_sdram: Simplify sdram_ddr_size() to return
block/vmdk: Simplify vmdk_co_create() to return directly
cleanup: Tweak and re-run return_directly.cocci
io: Tidy up fat-fingered parameter name
qapi: Use returned bool to check for failure (again)
sockets: Use ERRP_GUARD() where obviously appropriate
qemu-config: Use ERRP_GUARD() where obviously appropriate
qemu-config: Make config_parse_qdict() return bool
monitor: Use ERRP_GUARD() in monitor_init()
monitor: Simplify monitor_fd_param()'s error handling
error: Move ERRP_GUARD() to the beginning of the function
error: Drop a few superfluous ERRP_GUARD()
error: Drop some obviously superfluous error_propagate()
Drop more useless casts from void * to pointer
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The has_FOO for pointer-valued FOO are redundant, except for arrays.
They are also a nuisance to work with. Recent commit "qapi: Start to
elide redundant has_FOO in generated C" provided the means to elide
them step by step. This is the step for qapi/misc.json.
Said commit explains the transformation in more detail. The invariant
violations mentioned there do not occur here.
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20221104160712.3005652-18-armbru@redhat.com>
Commit 012d4c96e2 changed the visitor functions taking Error ** to
return bool instead of void, and the commits following it used the new
return value to simplify error checking. Since then a few more uses
in need of the same treatment crept in. Do that. All pretty
mechanical except for
* balloon_stats_get_all()
This is basically the same transformation commit 012d4c96e2 applied
to the virtual walk example in include/qapi/visitor.h.
* set_max_queue_size()
Additionally replace "goto end of function" by return.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221121085054.683122-10-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Since we already have bitmap_mutex to protect either the dirty bitmap or
the clear log bitmap, we don't need atomic operations to set/clear/test on
the clear log bitmap. Switching all ops from atomic to non-atomic
versions, meanwhile touch up the comments to show which lock is in charge.
Introduced non-atomic version of bitmap_test_and_clear_atomic(), mostly the
same as the atomic version but simplified a few places, e.g. dropped the
"old_bits" variable, and also the explicit memory barriers.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
If configuring with "--disable-system --disable-user --enable-guest-agent"
the linking currently fails with:
qga/qemu-ga.p/commands.c.o: In function `qmp_command_info':
build/../../home/thuth/devel/qemu/qga/commands.c:70: undefined reference to `qmp_command_name'
build/../../home/thuth/devel/qemu/qga/commands.c:71: undefined reference to `qmp_command_is_enabled'
build/../../home/thuth/devel/qemu/qga/commands.c:72: undefined reference to `qmp_has_success_response'
qga/qemu-ga.p/commands.c.o: In function `qmp_guest_info':
build/../../home/thuth/devel/qemu/qga/commands.c:82: undefined reference to `qmp_for_each_command'
qga/qemu-ga.p/commands.c.o: In function `qmp_guest_exec':
build/../../home/thuth/devel/qemu/qga/commands.c:410: undefined reference to `qbase64_decode'
qga/qemu-ga.p/channel-posix.c.o: In function `ga_channel_open':
build/../../home/thuth/devel/qemu/qga/channel-posix.c:214: undefined reference to `unix_listen'
build/../../home/thuth/devel/qemu/qga/channel-posix.c:228: undefined reference to `socket_parse'
build/../../home/thuth/devel/qemu/qga/channel-posix.c:234: undefined reference to `socket_listen'
qga/qemu-ga.p/commands-posix.c.o: In function `qmp_guest_file_write':
build/../../home/thuth/devel/qemu/qga/commands-posix.c:527: undefined reference to `qbase64_decode'
Let's make sure that we also compile and link the required files if
the system emulators have not been enabled.
Message-Id: <20221110083626.31899-1-thuth@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
If QEMU is started with `-D qemu.log.%d` without any `-d` option,
doing `log all` in the monitor fails with:
Filename template with '%d' required for 'tid'
It is confusing since '%d' was actually passed.
This happens because QEMU caches the log file name with %d converted
to getpid() since `tid` wasn't required. This name isn't suitable
for a subsequent enablement of per-thread logs. There's little cause
to change the behavior as `-d tid` is mostly used at user-only startup.
Drop the per-thread from the requested flags in this case : `log all`
will thus enable everything except `tid` instead of failing. This is
preferable over forcing the user to enable each log item individually.
With this patch, `tid` is now truely immutable : it can only be set
or unset from the command line and never changed afterwards.
Fixes: 4e51069d67 ("util/log: Support per-thread log files")
Cc: richard.henderson@linaro.org
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221104120059.678470-3-groug@kaod.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Per-thread logging was implemented under the assumption that once
enabled, it is not possible to switch back to single file logging.
This isn't enforced though and it is possible to go through the
global file opening sequence in per-thread mode. The code isn't
ready for this and produces unexpected results as detailed below.
Start QEMU in system emulation mode with `-D ./qemu.log.%d -d tid`
and then change the log level from the monitor to something that
doesn't have tid, e.g. `log cpu_reset`. The value of log_flags
is zero and per_thread is set to false : the rest of the code
then assumes it is running in the global log case and opens a
file named `qemu.log.%d`, which is obviously not an expected
behavior.
Enforce the immutability of the flag early in qemu_set_log_internal()
so that its value is correct for all subsequent users.
Fixes: 4e51069d67 ("util/log: Support per-thread log files")
Cc: richard.henderson@linaro.org
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221104120059.678470-2-groug@kaod.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
improve error handling during module load, by changing:
bool module_load(const char *prefix, const char *lib_name);
void module_load_qom(const char *type);
to:
int module_load(const char *prefix, const char *name, Error **errp);
int module_load_qom(const char *type, Error **errp);
where the return value is:
-1 on module load error, and errp is set with the error
0 on module or one of its dependencies are not installed
1 on module load success
2 on module load success (module already loaded or built-in)
module_load_qom_one has been introduced in:
commit 28457744c3 ("module: qom module support"), which built on top of
module_load_one, but discarded the bool return value. Restore it.
Adapt all callers to emit errors, or ignore them, or fail hard,
as appropriate in each context.
Replace the previous emission of errors via fprintf in _some_ error
conditions with Error and error_report, so as to emit to the appropriate
target.
A memory leak is also fixed as part of the module_load changes.
audio: when attempting to load an audio module, report module load errors.
Note that still for some callers, a single issue may generate multiple
error reports, and this could be improved further.
Regarding the audio code itself, audio_add() seems to ignore errors,
and this should probably be improved.
block: when attempting to load a block module, report module load errors.
For the code paths that already use the Error API, take advantage of those
to report module load errors into the Error parameter.
For the other code paths, we currently emit the error, but this could be
improved further by adding Error parameters to all possible code paths.
console: when attempting to load a display module, report module load errors.
qdev: when creating a new qdev Device object (DeviceState), report load errors.
If a module cannot be loaded to create that device, now abort execution
(if no CONFIG_MODULE) or exit (if CONFIG_MODULE).
qom/object.c: when initializing a QOM object, or looking up class_by_name,
report module load errors.
qtest: when processing the "module_load" qtest command, report errors
in the load of the module.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220929093035.4231-4-cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix the logic in qemu_add_wait_object() to avoid adding the same
HANDLE twice, as the behavior is undefined when passing an array
that contains same HANDLEs to WaitForMultipleObjects() API.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Message-Id: <20221019102015.2441622-2-bmeng.cn@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Fix and test the VISTR instruction on s390x
* Some more small s390x fixes and maintainer updates
* Make sure to remove all temporary files from qtests
* OpenBSD VM test update to version 7.2
* Add sndio to FreeBSD tests
* More patches to enable the qtests on Windows
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmNb1x8RHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbXmcA//TCliiFkhprVxzIqy7zb9uz2Odu+sS4dT
# azUSlXvC14fECm/Rb/rd2VLqCu5x2er8CYauxKQ4VhRImzcDta4kvpt/HKIppN2t
# sqw5tipJL0DYcWBwYL1llvfutM26M+Oh0igwR8uV7b+W1FjojEZdcOr9IZ6E6V55
# wQCE5OHm0VCr61QeI5IBfZTsiPo+DFomUCpj7w66j6i0CVDvmpoe36tCmvGgrcpZ
# SP7ep7/Iq+dnGh2YnJyoUOPlXeeiBCxAygOVnIRXptDeniGoliCFn7ksLdKDQ9qY
# 69pSPR/W7mTZB/HkCRalAbYuYrI9Rcqxdu6c9vcyB8Pr0snQLTf8qThY+BJ2oC4w
# JSGgWVniAk5MmrDazwNRkSbgngYLYf+CcT1h5AANuU5Kt50Bdy9Y3TuL5YVmofEp
# N4bypV0ICImQyDECz76+i5/iJOcWiRyjMfLT6y00dspeuy983xHakrsHGD8xj0U/
# 3IVxnF9bDnUSVg6lFhYrgCB3dRG1TNPJoYQOM7raS5MAPRrDtIuSabwtyn84jo4+
# 9kZRPJBriMBHNsCjGVlJ9CATmaK1SKVAbRcabjgOKoIwhZTpAe6JalykREUJlTys
# hB2V//lWWYPaSpzwY+OkvxoOmJIziixEskOmx6hPcoxID5v/bqlR69W15aUlKuLq
# VWFb+/yMvaE=
# =h0Ep
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 28 Oct 2022 09:20:31 EDT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2022-10-28' of https://gitlab.com/thuth/qemu: (21 commits)
tests/qtest: libqtest: Correct the timeout unit of blocking receive calls for win32
tests/qtest: libqos: Do not build virtio-9p unconditionally
tests/qtest: migration-test: Make sure QEMU process "to" exited after migration is canceled
tests/qtest: libqtest: Introduce qtest_wait_qemu()
tests/qtest: Use EXIT_FAILURE instead of magic number
tests/qtest: device-plug-test: Reverse the usage of double/single quotes
tests/qtest: Support libqtest to build and run on Windows
tests/qtest: Use send/recv for socket communication
accel/qtest: Support qtest accelerator for Windows
tests: Add sndio to the FreeBSD CI containers / VM
tests/vm: update openbsd to release 7.2
tests/qtest/libqos/e1000e: Use e1000_regs.h
tests/qtest/cxl-test: Remove temporary directories after testing
tests/qtest/tpm: Clean up remainders of swtpm
MAINTAINERS: target/s390x/: add Ilya as reviewer
tests/tcg/s390x: Add a test for the vistr instruction
target/s390x: Fix emulation of the VISTR instruction
tests/tcg/s390x: Test compiler flags only once, not every time
s390x/tod-kvm: don't save/restore the TOD in PV guests
s390x: step down as general arch maintainer
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When `-D ${logfile} -d tid` is passed, qemu_log_trylock() creates
a dedicated log file for the current thread and opens it. The
corresponding file descriptor is cached in a __thread variable.
Nothing is done to close the corresponding file descriptor when the
thread terminates though and the file descriptor is leaked.
The issue was found during code inspection and reproduced manually.
Fix that with an atexit notifier.
Fixes: 4e51069d67 ("util/log: Support per-thread log files")
Cc: richard.henderson@linaro.org
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20221021105734.555797-1-groug@kaod.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds support for asynchronously tearing down a VM on Linux.
When qemu terminates, either naturally or because of a fatal signal,
the VM is torn down. If the VM is huge, it can take a considerable
amount of time for it to be cleaned up. In case of a protected VM, it
might take even longer than a non-protected VM (this is the case on
s390x, for example).
Some users might want to shut down a VM and restart it immediately,
without having to wait. This is especially true if management
infrastructure like libvirt is used.
This patch implements a simple trick on Linux to allow qemu to return
immediately, with the teardown of the VM being performed
asynchronously.
If the new commandline option -async-teardown is used, a new process is
spawned from qemu at startup, using the clone syscall, in such way that
it will share its address space with qemu.The new process will have the
name "cleanup/<QEMU_PID>". It will wait until qemu terminates
completely, and then it will exit itself.
This allows qemu to terminate quickly, without having to wait for the
whole address space to be torn down. The cleanup process will exit
after qemu, so it will be the last user of the address space, and
therefore it will take care of the actual teardown. The cleanup
process will share the same cgroups as qemu, so both memory usage and
cpu time will be accounted properly.
If possible, close_range will be used in the cleanup process to close
all open file descriptors. If it is not available or if it fails, /proc
will be used to determine which file descriptors to close.
If the cleanup process is forcefully killed with SIGKILL before the
main qemu process has terminated completely, the mechanism is defeated
and the teardown will not be asynchronous.
This feature can already be used with libvirt by adding the following
to the XML domain definition to pass the parameter to qemu directly:
<commandline xmlns="http://libvirt.org/schemas/domain/qemu/1.0">
<arg value='-async-teardown'/>
</commandline>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Tested-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Message-Id: <20220812133453.82671-1-imbrenda@linux.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
pull: crypto and io queue
* Many LUKS header robustness checks
* Fix TLS PSK error reporting
* Enable LUKS creation on macOS
* Report useful errnos from seccomp
* I/O chanel Windows portability fix
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE2vOm/bJrYpEtDo4/vobrtBUQT98FAmNawAcACgkQvobrtBUQ
# T9/pWA/9FXE6kvkv9YQhb/h1rMALO1aLKqUG/jWKP/mzqqLpDKHxxPin/nw8RYff
# xyHt5mC7t1g7a8FFMlXxFHw1WE9o46j3tQg2IokWlX2ossYaZQx+BVv4s1zjTxcK
# KPVKWoEqN5sfa2T7gUGbfZ+dH9LSZ29DRT+GrO9YEvjdSg0yUKHXPetjw6iw5OVT
# GuI22xOVKbuCBf7PW/nvUe/6prxAfc7IavvAusrdkMFXymcys87q7ZCxGYEsDxyC
# vUkLdAoB9kcjwvmU+sZl9WhjasRQkUxW8zCToKea4TSS1fp5pgVL0TT4x7yq7ts4
# nqnaqiSTBfRda62lF64A9lM91K7hbDqPC33FkCNKWJGsQAYIFvdVJdqJsvZHUr1/
# 3KyHkXMsyzRfGnT7MHK+GpwcgvTupBP8ceiyYq28CLNAKXpXb6vmJIsIAdF3UaYi
# N320ogiU3iRmkqdbbbGTpBB40UQvQvdbmqKTTDmigLdpDL2TLzAqfpu1zepg+7xE
# wcXoPM9ZcRSwM7i9QyPMtjharCTeVR/QPlUN9agDGOlzNpUahIC5YrmCVKXNunnE
# M259Ytyb6ymaMrsHgshW1gJP3327N/lIOp5yLLHEzgLM1xAGOaDP83FsF8JA/Zsd
# f1he75N3KbDPYhgrdfFfitcO8F8zvhK3AqyqNDPCpJKVSeKKqFE=
# =qrzm
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 27 Oct 2022 13:29:43 EDT
# gpg: using RSA key DAF3A6FDB26B62912D0E8E3FBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full]
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>" [full]
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF
* tag 'misc-next-pull-request' of https://gitlab.com/berrange/qemu:
crypto: add test cases for many malformed LUKS header scenarios
crypto: ensure LUKS tests run with GNUTLS crypto provider
crypto: quote algorithm names in error messages
crypto: split off helpers for converting LUKS header endianess
crypto: split LUKS header definitions off into file
crypto: check that LUKS PBKDF2 iterations count is non-zero
crypto: strengthen the check for key slots overlapping with LUKS header
crypto: validate that LUKS payload doesn't overlap with header
crypto: enforce that key material doesn't overlap with LUKS header
crypto: enforce that LUKS stripes is always a fixed value
crypto: sanity check that LUKS header strings are NUL-terminated
tests: avoid DOS line endings in PSK file
crypto: check for and report errors setting PSK credentials
scripts: check if .git exists before checking submodule status
seccomp: Get actual errno value from failed seccomp functions
io/channel-watch: Fix socket watch on Windows
io/channel-watch: Drop the unnecessary cast
io/channel-watch: Drop a superfluous '#ifdef WIN32'
util/qemu-sockets: Use g_get_tmp_dir() to get the directory for temporary files
crypto/luks: Support creating LUKS image on Darwin
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Socket communication in the libqtest and libqmp codes uses read()
and write() which work on any file descriptor on *nix, and sockets
in *nix are an example of a file descriptor.
However sockets on Windows do not use *nix-style file descriptors,
so read() and write() cannot be used on sockets on Windows.
Switch over to use send() and recv() instead which work on both
Windows and *nix.
Signed-off-by: Xuzhou Cheng <xuzhou.cheng@windriver.com>
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20221028045736.679903-3-bin.meng@windriver.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
To be consistent with socket_uri(), add 'tcp:' prefix for inet type in
socket_parse(), by default socket_parse() use tcp when no prefix is
provided (format is host:port).
In socket_uri(), use 'vsock:' prefix for vsock type rather than 'tcp:'
because it makes a vsock address look like an inet address with CID
misinterpreted as host.
Goes back to commit 9aca82ba31 "migration: Create socket-address parameter"
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Rename SocketAddress_to_str() to socket_uri() and move it to
util/qemu-sockets.c close to socket_parse().
socket_uri() generates a string from a SocketAddress while
socket_parse() generates a SocketAddress from a string.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
... and implement it under POSIX. When a ThreadContext is provided,
create new threads via the context such that these new threads obtain a
properly configured CPU affinity.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Message-Id: <20221014134720.168738-6-david@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Let's make it easier to pin threads created via a ThreadContext to
all host CPUs currently belonging to a given set of host NUMA nodes --
which is the common case.
"node-affinity" is simply a shortcut for setting "cpu-affinity" manually
to the list of host CPUs belonging to the set of host nodes. This property
can only be written.
A simple QEMU example to set the CPU affinity to host node 1 on a system
with two nodes, 24 CPUs each, whereby odd-numbered host CPUs belong to
host node 1:
qemu-system-x86_64 -S \
-object thread-context,id=tc1,node-affinity=1
And we can query the cpu-affinity via HMP/QMP:
(qemu) qom-get tc1 cpu-affinity
[
1,
3,
5,
7,
9,
11,
13,
15,
17,
19,
21,
23,
25,
27,
29,
31,
33,
35,
37,
39,
41,
43,
45,
47
]
We cannot query the node-affinity:
(qemu) qom-get tc1 node-affinity
Error: Insufficient permission to perform this operation
But note that due to dynamic library loading this example will not work
before we actually make use of thread_context_create_thread() in QEMU
code, because the type will otherwise not get registered. We'll wire
this up next to make it work.
Note that if the host CPUs for a host node change due do CPU hot(un)plug
CPU onlining/offlining (i.e., lscpu output changes) after the ThreadContext
was started, the CPU affinity will not get updated.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221014134720.168738-5-david@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Setting the CPU affinity of QEMU threads is a bit problematic, because
QEMU doesn't always have permissions to set the CPU affinity itself,
for example, with seccomp after initialized by QEMU:
-sandbox enable=on,resourcecontrol=deny
General information about CPU affinities can be found in the man page of
taskset:
CPU affinity is a scheduler property that "bonds" a process to a given
set of CPUs on the system. The Linux scheduler will honor the given CPU
affinity and the process will not run on any other CPUs.
While upper layers are already aware of how to handle CPU affinities for
long-lived threads like iothreads or vcpu threads, especially short-lived
threads, as used for memory-backend preallocation, are more involved to
handle. These threads are created on demand and upper layers are not even
able to identify and configure them.
Introduce the concept of a ThreadContext, that is essentially a thread
used for creating new threads. All threads created via that context
thread inherit the configured CPU affinity. Consequently, it's
sufficient to create a ThreadContext and configure it once, and have all
threads created via that ThreadContext inherit the same CPU affinity.
The CPU affinity of a ThreadContext can be configured two ways:
(1) Obtaining the thread id via the "thread-id" property and setting the
CPU affinity manually (e.g., via taskset).
(2) Setting the "cpu-affinity" property and letting QEMU try set the
CPU affinity itself. This will fail if QEMU doesn't have permissions
to do so anymore after seccomp was initialized.
A simple QEMU example to set the CPU affinity to host CPU 0,1,6,7 would be:
qemu-system-x86_64 -S \
-object thread-context,id=tc1,cpu-affinity=0-1,cpu-affinity=6-7
And we can query it via HMP/QMP:
(qemu) qom-get tc1 cpu-affinity
[
0,
1,
6,
7
]
But note that due to dynamic library loading this example will not work
before we actually make use of thread_context_create_thread() in QEMU
code, because the type will otherwise not get registered. We'll wire
this up next to make it work.
In general, the interface behaves like pthread_setaffinity_np(): host
CPU numbers that are currently not available are ignored; only host CPU
numbers that are impossible with the current kernel will fail. If the
list of host CPU numbers does not include a single CPU that is
available, setting the CPU affinity will fail.
A ThreadContext can be reused, simply by reconfiguring the CPU affinity.
Note that the CPU affinity of previously created threads will not get
adjusted.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221014134720.168738-4-david@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Usually, we let upper layers handle CPU pinning, because
pthread_setaffinity_np() (-> sched_setaffinity()) is blocked via
seccomp when starting QEMU with
-sandbox enable=on,resourcecontrol=deny
However, we want to configure and observe the CPU affinity of threads
from QEMU directly in some cases when the sandbox option is either not
enabled or not active yet.
So let's add a way to configure CPU pinning via
qemu_thread_set_affinity() and obtain CPU affinity via
qemu_thread_get_affinity() and implement them under POSIX using
pthread_setaffinity_np() + pthread_getaffinity_np().
Implementation under Windows is possible using SetProcessAffinityMask()
+ GetProcessAffinityMask(), however, that is left as future work.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Message-Id: <20221014134720.168738-3-david@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Let's
* give the function a "qemu_*" style name
* make sure the parameters in the implementation match the prototype
* rename smp_cpus to max_threads, which makes the semantics of that
parameter clearer
... and add a function documentation.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Message-Id: <20221014134720.168738-2-david@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
When a RAMBlockNotifier is added, ->ram_block_added() is called with all
existing RAMBlocks. There is no equivalent ->ram_block_removed() call
when a RAMBlockNotifier is removed.
The util/vfio-helpers.c code (the sole user of RAMBlockNotifier) is fine
with this asymmetry because it does not rely on RAMBlockNotifier for
cleanup. It walks its internal list of DMA mappings and unmaps them by
itself.
Future users of RAMBlockNotifier may not have an internal data structure
that records added RAMBlocks so they will need ->ram_block_removed()
callbacks.
This patch makes ram_block_notifier_remove() symmetric with respect to
callbacks. Now util/vfio-helpers.c needs to unmap remaining DMA mappings
after ram_block_notifier_remove() has been called. This is necessary
since users like block/nvme.c may create additional DMA mappings that do
not originate from the RAMBlockNotifier.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20221013185908.1297568-4-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When a coroutine wakes up it may determine that it must re-queue.
Normally coroutines are pushed onto the back of the CoQueue, but for
fairness it may be necessary to push it onto the front of the CoQueue.
Add a flag to specify that the coroutine should be pushed onto the front
of the CoQueue. A later patch will use this to ensure fairness in the
bounce buffer CoQueue used by the blkio BlockDriver.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20221013185908.1297568-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Replace the existing logic to get the directory for temporary files
with g_get_tmp_dir(), which works for win32 too.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
