Nemonics E1000_STATUS_LAN_INIT_DONE and E1000_STATUS_ASDV_1000 have
the same value, and E1000_STATUS_ASDV_1000 should be used here because
E1000_STATUS_ASDV_1000 represents the auto-detected speed tested here
while E1000_STATUS_LAN_INIT_DONE is a value used for a different purpose
with a variant of e1000e family different from the one implemented in
QEMU.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20221103083425.100590-1-akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The register definitions in tests/qtest/e1000e-test.c had names
different from hw/net/e1000_regs.h, which made it hard to understand
what test codes corresponds to the implementation. Use
hw/net/e1000_regs.h from tests/qtest/libqos/e1000e.c to remove
these duplications.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20221103095416.110162-1-akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The later device status check depends on E1000_STATUS_LU, which is
enabled by E1000_CTRL_SLU. Though E1000_STATUS_LU is not implemented
and E1000_STATUS_LU is always available in the current implementation,
be a bit nicer and set E1000_CTRL_SLU just in case the bit is
implemented in the future.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20221103025451.27446-1-akihiko.odaki@daynix.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This introduces QEMU acpi/smbios biosbits avocado test which is run
from within the python virtual environment. When the bits tests are run, bits
binaries are downloaded from an external repo/location, bios bits iso is
regenerated containing the acpi/smbios bits tests that are maintained as a part
of the QEMU source under tests/avocado/acpi-bits/bits-test . When the VM is
spawned with the iso, it runs the tests in batch mode and the results are pushed
out from the VM to the test machine where they are analyzed by this script and
pass/fail results are reported.
Cc: Daniel P. Berrangé <berrange@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Maydell Peter <peter.maydell@linaro.org>
Cc: John Snow <jsnow@redhat.com>
Cc: Thomas Huth <thuth@redhat.com>
Cc: Alex Bennée <alex.bennee@linaro.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Michael Tsirkin <mst@redhat.com>
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20221021095108.104843-6-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
PSS tests in acpi test suite seems to be failing in biosbits. This is because
the test is unable to find PSS support in QEMU bios. Let us disable
them for now so that make check does not fail. We can fix the tests and
re-enable them later.
Example failure:
---- ACPI _PSS (Pstate) table conformance tests ----
[assert] _PSS must exist FAIL
\_SB_.CPUS.C000
No _PSS exists
Summary: 1 passed, 1 failed
---- ACPI _PSS (Pstate) runtime tests ----
[assert] _PSS must exist FAIL
\_SB_.CPUS.C000
No _PSS exists
Summary: 0 passed, 1 failed
Cc: Daniel P. Berrangé <berrange@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Maydell Peter <peter.maydell@linaro.org>
Cc: John Snow <jsnow@redhat.com>
Cc: Thomas Huth <thuth@redhat.com>
Cc: Alex Bennée <alex.bennee@linaro.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Michael Tsirkin <mst@redhat.com>
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221021095108.104843-4-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add encoding interfaces for DER encoding:
1. support decoding of 'bit string', 'octet string', 'object id'
and 'context specific tag' for DER encoder.
2. implemented a simple DER encoder.
3. add more testsuits for DER encoder.
Signed-off-by: lei he <helei.sig11@bytedance.com>
Message-Id: <20221008085030.70212-3-helei.sig11@bytedance.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
testing and plugin updates for 7.2:
- cleanup win32/64 docker files
- update test-mingw test
- add flex/bison to debian-all-test
- handle --enable-static/--disable-pie in config
- extend timeouts on x86_64 avocado tests
- add flex/bison to debian-hexagon-cross
- use regular semihosting for nios2 check-tcg
- fix obscure linker error to nios2 softmmu tests
- various windows portability fixes for tests
- clean-up of MAINTAINERS
- use -machine none when appropriate in avocado
- make raspi2_initrd test detect shutdown
- disable sh4 rd2 tests on gitlab
- re-enable threadcount/linux-test for sh4
- clean-up s390x handling of "ex" instruction
- better handle new CPUs in execlog plugin
- pass CONFIG_DEBUG_TCG to plugin builds
- try and avoid races in test-io-channel-command
- speed up ssh key checking for tests/vm
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmNhI/MACgkQ+9DbCVqe
# KkSFXggAg0HIpBDcNz0V5Mh5p69F14pwbDSygKqGDFBebdOHeL7f+WCvQPUGEWxp
# 814zjvRY3SC4Mo4mtzguRvNu0styaUpemvRw5FDYK48GpEjg2eVxTnAFD4nr7ud0
# dhw3iaHP+RjA6s3EpPUqQ5nlZEgFJ+Tvkckk3wKSpksBYA4tJra6Uey5kpZ27x0T
# KOzB2P6w+9B/B11n/aeSxvRPZdnXt2MyfS/3pwwfoFYioEyaEQ3Ie6ooachtdSL3
# PEvnJVK0VVYbZQwBXJlycNLlK/D++s4AEwmnZ5GmvDFuXlkRO9YMy9Wa5TKJl7gz
# 76Aw1KHsE03SyAPvH4bE7eGkIwhJOQ==
# =6hXE
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 01 Nov 2022 09:49:39 EDT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-testing-for-7.2-011122-3' of https://github.com/stsquad/qemu: (31 commits)
tests/vm: use -o IdentitiesOnly=yes for ssh
tests/unit: cleanups for test-io-channel-command
contrib/plugins: protect execlog's last_exec expansion
contrib/plugins: enable debug on CONFIG_DEBUG_TCG
tests/tcg: include CONFIG_PLUGIN in config-host.mak
target/s390x: fake instruction loading when handling 'ex'
target/s390x: don't probe next pc for EXecuted insns
target/s390x: don't use ld_code2 to probe next pc
tests/tcg: re-enable threadcount for sh4
tests/tcg: re-enable linux-test for sh4
tests/avocado: disable sh4 rd2 tests on Gitlab
tests/avocado: raspi2_initrd: Wait for guest shutdown message before stopping
tests/avocado: set -machine none for userfwd and vnc tests
MAINTAINERS: fix-up for check-tcg Makefile changes
MAINTAINERS: add features_to_c.sh to gdbstub files
MAINTAINERS: add entries for the key build bits
hw/usb: dev-mtp: Use g_mkdir()
block/vvfat: Unify the mkdir() call
tcg: Avoid using hardcoded /tmp
semihosting/arm-compat-semi: Avoid using hardcoded /tmp
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When one has a lot of keys in ~/.ssh directory, the ssh command will
try all of them before the one specified on the command line, and this
may cause the remote ssh server to reject the connection due to too
many failed authentication attempts.
Fix by adding -o IdentitiesOnly=yes, which makes the ssh client
consider only the keys specified on the command line.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20221027113026.2280863-1-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221027183637.2772968-31-alex.bennee@linaro.org>
This test is hanging under heavy load when the two socats race while
trying to create the socket. I've tried various approaches to avoid
the race but it seems "creat=0" won't stop socat trying to create a
pipe if it executes first. In the end I just use a small sleep which
seems to be reliable enough on the load situations I've tried.
While I was there I also properly created a tmpdir for the socket to
live in which is cleaned up at the end of the test.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Cc: Thomas Huth <thuth@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Juan Quintela <quintela@redhat.com>
Message-Id: <20221027183637.2772968-30-alex.bennee@linaro.org>
Running repeated invocations on a number of test boxes show a fairly
high error rate:
$ retry.py -n 100 -c -- ./tests/venv/bin/avocado run tests/avocado/boot_linux_console.py:BootLinuxConsole.test_sh4_r2d
retry.py called with ['./tests/venv/bin/avocado', 'run', 'tests/avocado/boot_linux_console.py:BootLinuxConsole.test_sh4_r2d']
Results:
Run, Ret, Pass/Fail, Time, Total Pass, Total Run
...
Results summary:
0: 94 times (94.00%), avg time 2.254 (0.00 varience/0.04 deviation)
1: 3 times (3.00%), avg time 1.837 (0.02 varience/0.14 deviation)
8: 3 times (3.00%), avg time 91.288 (0.02 varience/0.15 deviation)
Examining the logs they fall into various categories of un-handled
unaligned access by user space and unexpected FPU usage by the kernel
which ultimately lead to the failure to reach the login prompt. This
could be bugs in the translator that only get hit occasionally or just
a flaky kernel - its hard to tell. To avoid these failures gating CI
lets skip on GitLab.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Thomas Huth <thuth@redhat.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Magnus Damm <magnus.damm@gmail.com>
Message-Id: <20221027183637.2772968-21-alex.bennee@linaro.org>
The avocado test
tests/avocado/boot_linux_console.py:BootLinuxConsole.test_arm_raspi2_initrd
finishes with
exec_command(self, 'halt')
# Wait for VM to shut down gracefully
self.vm.wait()
In theory this should be fine. In practice it runs into two bugs:
* when the test calls self.vm.wait() Avocado closes the socket
connection to the guest serial console immediately, so the
avocado logs don't have the last part of the guest output:
https://gitlab.com/qemu-project/qemu/-/issues/1265
* when the socket is closed, a bug in the QEMU socket chardev
means that it loses any data that the guest UART has not
yet consumed. This means that the guest doesn't always read
the full 'halt' command string, so the test intermittently
fails with a timeout:
https://gitlab.com/qemu-project/qemu/-/issues/1264
Work around both of these by waiting for the guest to print the
string that means it has completed the shutdown process. This fixes
a very long standing intermittent failure in this test.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/636
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20221020102012.3015662-1-peter.maydell@linaro.org>
Message-Id: <20221027183637.2772968-20-alex.bennee@linaro.org>
debian-hexagon-cross contains two images, one to build the toolchain
used for building the Hexagon tests themselves, and one image to build
QEMU and run the tests.
This commit adds flex/bison to the final image that builds QEMU so that
it can also build idef-parser.
Note: This container is not built by the CI and needs to be rebuilt and
updated manually.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20221014223642.147845-1-anjo@rev.ng>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221027183637.2772968-8-alex.bennee@linaro.org>
While the test-build test happily run for mingw the test-mingw case
runs more of the packaging inline with what our CI does. It however
fails if we don't find both compilers and expects to be run on a
docker image with both.
Remove that distinction and make it work more like the other build
test scripts.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221027183637.2772968-3-alex.bennee@linaro.org>
* Fix and test the VISTR instruction on s390x
* Some more small s390x fixes and maintainer updates
* Make sure to remove all temporary files from qtests
* OpenBSD VM test update to version 7.2
* Add sndio to FreeBSD tests
* More patches to enable the qtests on Windows
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmNb1x8RHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbXmcA//TCliiFkhprVxzIqy7zb9uz2Odu+sS4dT
# azUSlXvC14fECm/Rb/rd2VLqCu5x2er8CYauxKQ4VhRImzcDta4kvpt/HKIppN2t
# sqw5tipJL0DYcWBwYL1llvfutM26M+Oh0igwR8uV7b+W1FjojEZdcOr9IZ6E6V55
# wQCE5OHm0VCr61QeI5IBfZTsiPo+DFomUCpj7w66j6i0CVDvmpoe36tCmvGgrcpZ
# SP7ep7/Iq+dnGh2YnJyoUOPlXeeiBCxAygOVnIRXptDeniGoliCFn7ksLdKDQ9qY
# 69pSPR/W7mTZB/HkCRalAbYuYrI9Rcqxdu6c9vcyB8Pr0snQLTf8qThY+BJ2oC4w
# JSGgWVniAk5MmrDazwNRkSbgngYLYf+CcT1h5AANuU5Kt50Bdy9Y3TuL5YVmofEp
# N4bypV0ICImQyDECz76+i5/iJOcWiRyjMfLT6y00dspeuy983xHakrsHGD8xj0U/
# 3IVxnF9bDnUSVg6lFhYrgCB3dRG1TNPJoYQOM7raS5MAPRrDtIuSabwtyn84jo4+
# 9kZRPJBriMBHNsCjGVlJ9CATmaK1SKVAbRcabjgOKoIwhZTpAe6JalykREUJlTys
# hB2V//lWWYPaSpzwY+OkvxoOmJIziixEskOmx6hPcoxID5v/bqlR69W15aUlKuLq
# VWFb+/yMvaE=
# =h0Ep
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 28 Oct 2022 09:20:31 EDT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2022-10-28' of https://gitlab.com/thuth/qemu: (21 commits)
tests/qtest: libqtest: Correct the timeout unit of blocking receive calls for win32
tests/qtest: libqos: Do not build virtio-9p unconditionally
tests/qtest: migration-test: Make sure QEMU process "to" exited after migration is canceled
tests/qtest: libqtest: Introduce qtest_wait_qemu()
tests/qtest: Use EXIT_FAILURE instead of magic number
tests/qtest: device-plug-test: Reverse the usage of double/single quotes
tests/qtest: Support libqtest to build and run on Windows
tests/qtest: Use send/recv for socket communication
accel/qtest: Support qtest accelerator for Windows
tests: Add sndio to the FreeBSD CI containers / VM
tests/vm: update openbsd to release 7.2
tests/qtest/libqos/e1000e: Use e1000_regs.h
tests/qtest/cxl-test: Remove temporary directories after testing
tests/qtest/tpm: Clean up remainders of swtpm
MAINTAINERS: target/s390x/: add Ilya as reviewer
tests/tcg/s390x: Add a test for the vistr instruction
target/s390x: Fix emulation of the VISTR instruction
tests/tcg/s390x: Test compiler flags only once, not every time
s390x/tod-kvm: don't save/restore the TOD in PV guests
s390x: step down as general arch maintainer
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
pull: crypto and io queue
* Many LUKS header robustness checks
* Fix TLS PSK error reporting
* Enable LUKS creation on macOS
* Report useful errnos from seccomp
* I/O chanel Windows portability fix
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE2vOm/bJrYpEtDo4/vobrtBUQT98FAmNawAcACgkQvobrtBUQ
# T9/pWA/9FXE6kvkv9YQhb/h1rMALO1aLKqUG/jWKP/mzqqLpDKHxxPin/nw8RYff
# xyHt5mC7t1g7a8FFMlXxFHw1WE9o46j3tQg2IokWlX2ossYaZQx+BVv4s1zjTxcK
# KPVKWoEqN5sfa2T7gUGbfZ+dH9LSZ29DRT+GrO9YEvjdSg0yUKHXPetjw6iw5OVT
# GuI22xOVKbuCBf7PW/nvUe/6prxAfc7IavvAusrdkMFXymcys87q7ZCxGYEsDxyC
# vUkLdAoB9kcjwvmU+sZl9WhjasRQkUxW8zCToKea4TSS1fp5pgVL0TT4x7yq7ts4
# nqnaqiSTBfRda62lF64A9lM91K7hbDqPC33FkCNKWJGsQAYIFvdVJdqJsvZHUr1/
# 3KyHkXMsyzRfGnT7MHK+GpwcgvTupBP8ceiyYq28CLNAKXpXb6vmJIsIAdF3UaYi
# N320ogiU3iRmkqdbbbGTpBB40UQvQvdbmqKTTDmigLdpDL2TLzAqfpu1zepg+7xE
# wcXoPM9ZcRSwM7i9QyPMtjharCTeVR/QPlUN9agDGOlzNpUahIC5YrmCVKXNunnE
# M259Ytyb6ymaMrsHgshW1gJP3327N/lIOp5yLLHEzgLM1xAGOaDP83FsF8JA/Zsd
# f1he75N3KbDPYhgrdfFfitcO8F8zvhK3AqyqNDPCpJKVSeKKqFE=
# =qrzm
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 27 Oct 2022 13:29:43 EDT
# gpg: using RSA key DAF3A6FDB26B62912D0E8E3FBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full]
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>" [full]
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF
* tag 'misc-next-pull-request' of https://gitlab.com/berrange/qemu:
crypto: add test cases for many malformed LUKS header scenarios
crypto: ensure LUKS tests run with GNUTLS crypto provider
crypto: quote algorithm names in error messages
crypto: split off helpers for converting LUKS header endianess
crypto: split LUKS header definitions off into file
crypto: check that LUKS PBKDF2 iterations count is non-zero
crypto: strengthen the check for key slots overlapping with LUKS header
crypto: validate that LUKS payload doesn't overlap with header
crypto: enforce that key material doesn't overlap with LUKS header
crypto: enforce that LUKS stripes is always a fixed value
crypto: sanity check that LUKS header strings are NUL-terminated
tests: avoid DOS line endings in PSK file
crypto: check for and report errors setting PSK credentials
scripts: check if .git exists before checking submodule status
seccomp: Get actual errno value from failed seccomp functions
io/channel-watch: Fix socket watch on Windows
io/channel-watch: Drop the unnecessary cast
io/channel-watch: Drop a superfluous '#ifdef WIN32'
util/qemu-sockets: Use g_get_tmp_dir() to get the directory for temporary files
crypto/luks: Support creating LUKS image on Darwin
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Some qtest cases don't get response from the QEMU executable under
test in time on Windows. It turns out that the socket receive call
got timeout before it receive the complete response.
The timeout value is supposed to be set to 50 seconds via the
setsockopt() call, but there is a difference among platforms.
The timeout unit of blocking receive calls is measured in
seconds on non-Windows platforms but milliseconds on Windows.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20221028045736.679903-10-bin.meng@windriver.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
