- Guard Linux only headers.
- Add qemu/statfs.h header to abstract over the which
headers are needed for struct statfs
- Define `ENOATTR` only if not only defined
(it's defined in system headers on Darwin).
Signed-off-by: Keno Fischer <keno@juliacomputing.com>
[Michael Roitzsch: - Rebase for NixOS]
Signed-off-by: Michael Roitzsch <reactorcontrol@icloud.com>
While it might at first appear that fsdev/virtfs-proxy-header.c would
need similar adjustment for darwin as file-op-9p here, a later patch in
this series disables virtfs-proxy-helper for non-Linux. Allowing
virtfs-proxy-helper on darwin could potentially be an additional
optimization later.
[Will Cohen: - Fix headers for Alpine
- Integrate statfs.h back into file-op-9p.h
- Remove superfluous header guards from file-opt-9p
- Add note about virtfs-proxy-helper being disabled
on non-Linux for this patch series]
Signed-off-by: Will Cohen <wwcohen@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20220227223522.91937-2-wwcohen@gmail.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
The new block driver simply utilizes snapshot-access API of underlying
block node.
In further patches we want to use it like this:
[guest] [NBD export]
| |
| root | root
v file v
[copy-before-write]<------[snapshot-access]
| |
| file | target
v v
[active-disk] [temp.img]
This way, NBD client will be able to read snapshotted state of active
disk, when active disk is continued to be written by guest. This is
known as "fleecing", and currently uses another scheme based on qcow2
temporary image which backing file is active-disk. New scheme comes
with benefits - see next commit.
The other possible application is exporting internal snapshots of
qcow2, like this:
[guest] [NBD export]
| |
| root | root
v file v
[qcow2]<---------[snapshot-access]
For this, we'll need to implement snapshot-access API handlers in
qcow2 driver, and improve snapshot-access block driver (and API) to
make it possible to select snapshot by name. Another thing to improve
is size of snapshot. Now for simplicity we just use size of bs->file,
which is OK for backup, but for qcow2 snapshots export we'll need to
imporve snapshot-access API to get size of snapshot.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20220303194349.2304213-12-vsementsov@virtuozzo.com>
[hreitz: Rebased on block GS/IO split]
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Add new block driver handlers and corresponding generic wrappers.
It will be used to allow copy-before-write filter to provide
reach fleecing interface in further commit.
In future this approach may be used to allow reading qcow2 internal
snapshots, for example to export them through NBD.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220303194349.2304213-11-vsementsov@virtuozzo.com>
[hreitz: Rebased on block GS/IO split]
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
There is a bug in handling BDRV_REQ_NO_WAIT flag: we still may wait in
wait_serialising_requests() if request is unaligned. And this is
possible for the only user of this flag (preallocate filter) if
underlying file is unaligned to its request_alignment on start.
So, we have to fix preallocate filter to do only aligned preallocate
requests.
Next, we should fix generic block/io.c somehow. Keeping in mind that
preallocate is the only user of BDRV_REQ_NO_WAIT and that we have to
fix its behavior now, it seems more safe to just assert that we never
use BDRV_REQ_NO_WAIT with unaligned requests and add corresponding
comment. Let's do so.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Message-Id: <20220215121609.38570-1-vsementsov@virtuozzo.com>
[hreitz: Rebased on block GS/IO split]
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
ArchCPU is our interface with target-specific code. Use it as
a forward-declared opaque pointer (abstract type), having its
structure defined by each target.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-15-f4bug@amsat.org>
While CPUState is our interface with generic code, CPUArchState is
our interface with target-specific code. Use CPUArchState as an
abstract type, defined by each target.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-13-f4bug@amsat.org>
This can allow the guest OS to determine more easily if i8042 controller
is present in the system or not, so it doesn't need to do probing of the
controller, but just initialize it immediately, before enumerating the
ACPI AML namespace.
The 8042 bit in IAPC_BOOT_ARCH was introduced from ACPI spec v2 (FADT
revision 2 and above). Therefore, in this change, we only enable this bit for
x86/q35 machine types since x86/i440fx machines use FADT ACPI table with
revision 1.
Signed-off-by: Liav Albani <liavalb@gmail.com>
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20220304154032.2071585-3-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
module_allow_arch() is the single target-specific call in the
whole vl.c file. Move the module initialization out to arch_init.c,
that way we'll be able to build vl.o once for all targets (the
next commit).
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220207075426.81934-21-f4bug@amsat.org>
cpu_address_space_init() and cpu_reloading_memory_map() are
target-agnostic, but are declared in "exec/exec-all.h" which
contains target-specific declarations. Any target-agnostic
source including "exec/exec-all.h" becomes target-specific and
we have to compile it N times for the N targets built. In order
to avoid that, move the declarations to "exec/cpu-common.h" which
only contains target-agnostic declarations.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220207075426.81934-20-f4bug@amsat.org>
target_ulong is target-specific, while vaddr isn't.
Remove the unnecessary "exec/cpu-defs.h" target-speficic header
from "memory_mapping.h" and use the target-agnostic "hw/core/cpu.h"
locally in memory_mapping.c.
Remove "exec/memory.h" since MemoryRegion is forward-declared in
"qemu/typedefs.h".
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220207075426.81934-6-f4bug@amsat.org>
cpu_memory_rw_debug() is declared in "exec/cpu-all.h" which
contains target-specific declarations. To be able to use it
from target agnostic source, move the declaration to the
generic "exec/cpu-common.h" header.
Replace the target-specific 'target_ulong' type by 'vaddr'
which better reflects the argument type, and is target agnostic.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220207075426.81934-5-f4bug@amsat.org>
event_notifier_get_fd(const EventNotifier *e) always returns
EventNotifier's read file descriptor (rfd). This is not a problem when
the EventNotifier is backed by a an eventfd, as a single file
descriptor is used both for reading and triggering events (rfd ==
wfd).
But, when EventNotifier is backed by a pipe pair, we have two file
descriptors, one that can only be used for reads (rfd), and the other
only for writes (wfd).
There's, at least, one known situation in which we need to obtain wfd
instead of rfd, which is when setting up the file that's going to be
sent to the peer in vhost's SET_VRING_CALL.
Add a new event_notifier_get_wfd(const EventNotifier *e) that can be
used to obtain wfd where needed.
Signed-off-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220304100854.14829-2-slp@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
commit
f862ddbb1a (hw/i386: Remove the deprecated pc-1.x machine types)
removed the last user of broken APIC ID compat knob,
but compat_apic_id_mode itself was forgotten.
Clean it up and simplify x86_cpu_apic_id_from_index()
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220228131634.3389805-1-imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
On some older software like Windows 7 installer, having both a PS/2
mouse and USB mouse results in only one device working property (which
might be a different device each boot). While the workaround to not use
a USB mouse with such software is valid, it creates an inconsistent
experience if the user wishes to always use a USB mouse.
This introduces a new machine property to inhibit the creation of the
i8042 PS/2 controller.
Signed-off-by: Joelle van Dyne <j@getutm.app>
Message-Id: <20220227210655.45592-1-j@getutm.app>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
on creation a PCIDevice has power turned on at the end of pci_qdev_realize()
however later on if PCIe slot isn't populated with any children
it's power is turned off. It's fine if native hotplug is used
as plug callback will power slot on among other things.
However when ACPI hotplug is enabled it replaces native PCIe plug
callbacks with ACPI specific ones (acpi_pcihp_device_*plug_cb) and
as result slot stays powered off. It works fine as ACPI hotplug
on guest side takes care of enumerating/initializing hotplugged
device. But when later guest is migrated, call chain introduced by]
commit d5daff7d31 (pcie: implement slot power control for pcie root ports)
pcie_cap_slot_post_load()
-> pcie_cap_update_power()
-> pcie_set_power_device()
-> pci_set_power()
-> pci_update_mappings()
will disable earlier initialized BARs for the hotplugged device
in powered off slot due to commit 23786d1344 (pci: implement power state)
which disables BARs if power is off.
Fix it by setting PCI_EXP_SLTCTL_PCC to PCI_EXP_SLTCTL_PWR_ON
on slot (root port/downstream port) at the time a device
hotplugged into it. As result PCI_EXP_SLTCTL_PWR_ON is migrated
to target and above call chain keeps device plugged into it
powered on.
Fixes: d5daff7d31 ("pcie: implement slot power control for pcie root ports")
Fixes: 23786d1344 ("pci: implement power state")
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=2053584
Suggested-by: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220301151200.3507298-3-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
QEMU side has already imported pvpanic.h from linux, remove bit
definitions from include/hw/misc/pvpanic.h, and use
include/standard-headers/linux/pvpanic.h instead.
Also minor changes for PVPANIC_CRASHLOADED -> PVPANIC_CRASH_LOADED.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20220221122717.1371010-2-pizhenwei@bytedance.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Currently the virtio-iommu device must be programmed before it allows
DMA from any PCI device. This can make the VM entirely unusable when a
virtio-iommu driver isn't present, for example in a bootloader that
loads the OS from storage.
Similarly to the other vIOMMU implementations, default to DMA bypassing
the IOMMU during boot. Add a "boot-bypass" property, defaulting to true,
that lets users change this behavior.
Replace the VIRTIO_IOMMU_F_BYPASS feature, which didn't support bypass
before feature negotiation, with VIRTIO_IOMMU_F_BYPASS_CONFIG.
We add the bypass field to the migration stream without introducing
subsections, based on the assumption that this virtio-iommu device isn't
being used in production enough to require cross-version migration at
the moment (all previous version required workarounds since they didn't
support ACPI and boot-bypass).
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-Id: <20220214124356.872985-3-jean-philippe@linaro.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
SC is required for some kernel features like vhost-vDPA. So this patch
implements basic SC feature. The idea is pretty simple, for software
emulated DMA it would be always coherent. In this case we can simple
advertise ECAP_SC bit. For VFIO and vhost, thing will be more much
complicated, so this patch simply fail the IOMMU notifier
registration.
In the future, we may want to have a dedicated notifiers flag or
similar mechanism to demonstrate the coherency so VFIO could advertise
that if it has VFIO_DMA_CC_IOMMU, for vhost kernel backend we don't
need that since it's a software backend.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220214060346.72455-1-jasowang@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Snapshots run also under the BQL, so they all are
in the global state API. The aiocontext lock that they hold
is currently an overkill and in future could be removed.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220303151616.325444-23-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
