When an IOThread is configured, the ctrl virtqueue is processed in the
IOThread. TMFs that reset SCSI devices are currently called directly
from the IOThread and trigger an assertion failure in blk_drain() from
the following call stack:
virtio_scsi_handle_ctrl_req -> virtio_scsi_do_tmf -> device_code_reset
-> scsi_disk_reset -> scsi_device_purge_requests -> blk_drain
../block/block-backend.c:1780: void blk_drain(BlockBackend *): Assertion `qemu_in_main_thread()' failed.
The blk_drain() function is not designed to be called from an IOThread
because it needs the Big QEMU Lock (BQL).
This patch defers TMFs that reset SCSI devices to a Bottom Half (BH)
that runs in the main loop thread under the BQL. This way it's safe to
call blk_drain() and the assertion failure is avoided.
Introduce s->tmf_bh_list for tracking TMF requests that have been
deferred to the BH. When the BH runs it will grab the entire list and
process all requests. Care must be taken to clear the list when the
virtio-scsi device is reset or unrealized. Otherwise deferred TMF
requests could execute later and lead to use-after-free or other
undefined behavior.
The s->resetting counter that's used by TMFs that reset SCSI devices is
accessed from multiple threads. This patch makes that explicit by using
atomic accessor functions. With this patch applied the counter is only
modified by the main loop thread under the BQL but can be read by any
thread.
Reported-by: Qing Wang <qinwang@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230221212218.1378734-4-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_is_inserted() need to hold a reader lock for the graph.
blk_is_inserted() is done as a co_wrapper_mixed_bdrv_rdlock (unlike most
other blk_* functions) because it is called a lot from other blk_co_*()
functions that already hold the lock. These calls go through
blk_is_available(), which becomes a co_wrapper_mixed_bdrv_rdlock, too,
for the same reason.
Functions that run in a coroutine and can call bdrv_co_is_available()
directly are changed to do so, which results in better TSA coverage.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-19-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_pwrite_sync() need to hold a reader lock for the graph.
For some places, we know that they will hold the lock, but we don't have
the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock()
with a FIXME comment. These places will be removed once everything is
properly annotated.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-13-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_pread*/pwrite*() need to hold a reader lock for the graph.
For some places, we know that they will hold the lock, but we don't have
the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock()
with a FIXME comment. These places will be removed once everything is
properly annotated.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-12-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_driver_*() need to hold a reader lock for the graph. It doesn't add
the annotation to public functions yet.
For some places, we know that they will hold the lock, but we don't have
the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock()
with a FIXME comment. These places will be removed once everything is
properly annotated.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-11-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_pwrite_zeroes() need to hold a reader lock for the graph.
For some places, we know that they will hold the lock, but we don't have
the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock()
with a FIXME comment. These places will be removed once everything is
properly annotated.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-10-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_pdiscard() need to hold a reader lock for the graph.
For some places, we know that they will hold the lock, but we don't have
the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock()
with a FIXME comment. These places will be removed once everything is
properly annotated.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-9-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_flush() need to hold a reader lock for the graph.
For some places, we know that they will hold the lock, but we don't have
the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock()
with a FIXME comment. These places will be removed once everything is
properly annotated.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-8-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_block_status() need to hold a reader lock for the graph.
For some places, we know that they will hold the lock, but we don't have
the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock()
with a FIXME comment. These places will be removed once everything is
properly annotated.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-5-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_truncate() need to hold a reader lock for the graph.
For some places, we know that they will hold the lock, but we don't have
the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock()
with a FIXME comment. These places will be removed once everything is
properly annotated.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-4-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The QERR_ macros are leftovers from the days of "rich" error objects.
We've been trying to reduce their remaining use.
The stubbed out Rocker monitor commands are the last remaining users
of QERR_FEATURE_DISABLED. They fail like this:
(qemu) info rocker mumble
Error: The feature 'rocker' is not enabled
The real rocker commands fail like this when the named object doesn't
exist:
Error: rocker mumble not found
If that's good enough when Rocker is enabled, then it's good enough
when it's disabled, so replace QERR_FEATURE_DISABLED with that, and
drop the macro.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230207075115.1525-13-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
replay_add_blocker() takes an Error *. All callers pass one created
like this:
error_setg(&blocker, QERR_REPLAY_NOT_SUPPORTED, "some feature");
Folding this into replay_add_blocker() simplifies the callers, losing
a bit of generality we haven't needed in more than six years.
Since there are no other uses of macro QERR_REPLAY_NOT_SUPPORTED,
replace the remaining one by its expansion, and drop the macro.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230207075115.1525-10-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Windows implementation of setjmp/longjmp is done in
C:/WINDOWS/system32/ucrtbase.dll. Alas, on arm64, it seems to *always*
perform stack unwinding, which crashes from generated code.
By using alternative implementation built in mingw, we avoid doing stack
unwinding and this fixes crash when calling longjmp.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230221153006.20300-3-pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Currently dying to one of the core_dump_signal()s deadlocks, because
dump_core_and_abort() calls start_exclusive() two times: first via
stop_all_tasks(), and then via preexit_cleanup() ->
qemu_plugin_user_exit().
There are a number of ways to solve this: resume after dumping core;
check cpu_in_exclusive_context() in qemu_plugin_user_exit(); or make
{start,end}_exclusive() recursive. Pick the last option, since it's
the most straightforward one.
Fixes: da91c19202 ("linux-user: Clean up when exiting due to a signal")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230214140829.45392-3-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
# -----BEGIN PGP SIGNATURE-----
# Version: GnuPG v1
#
# iQEcBAABAgAGBQJj7xKYAAoJEO8Ells5jWIRDZQH/Rao24sq3j97qE5RzekvANzq
# GnHUyLnl3yeOSNumv2BJInZTvgUpYL2etGQr3DtGRwOrr7w1vKB3zhY3V3jQefkh
# f4rsEGkamL/qM2N2cGUIUSqevo7OGnP8aQojpEi4MWWZ30B3L6jqd4NqyA1gyndV
# 1eBkpR+BY2PjcLbgvFUZEXeAn/vapE5NKULXUGhg5mMvgwYH3CgZXpqqkxr876za
# S4rZMtReXKNeid14Z35SUjJdV2WKYmo/lN9+GQxF2YNLmDC3RtuFQVm038erSqvs
# uLVSg8tiIlCyOcSDpR/BARNrxVwzlJp5X6ocapHubS/i0Rp/Zo7ezSk/XWH1gfU=
# =UbzF
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 17 Feb 2023 05:37:28 GMT
# gpg: using RSA key EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* tag 'net-pull-request' of https://github.com/jasowang/qemu:
vdpa: fix VHOST_BACKEND_F_IOTLB_ASID flag check
net: stream: add a new option to automatically reconnect
vmnet: stop recieving events when VM is stopped
net: Increase L2TPv3 buffer to fit jumboframes
hw/net/vmxnet3: allow VMXNET3_MAX_MTU itself as a value
hw/net/lan9118: log [read|write]b when mode_16bit is enabled rather than abort
net: Replace "Supported NIC models" with "Available NIC models"
net: Restore printing of the help text with "-nic help"
net: Move the code to collect available NIC models to a separate function
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Block layer patches
- configure: Enable -Wthread-safety if present
- no_co_wrapper to fix bdrv_open*() calls from coroutine context
- curl fixes, including enablement of newer libcurl versions
- MAINTAINERS: drop Vladimir from parallels block driver
- hbitmap: fix hbitmap_status() return value for first dirty bit case
- file-posix: Fix assertion failure in write_zeroes after moving
bdrv_getlength() to co_wrapper
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEE3D3rFZqa+V09dFb+fwmycsiPL9YFAmPvgm0RHGt3b2xmQHJl
# ZGhhdC5jb20ACgkQfwmycsiPL9ZxQg//ZWwwh/s/P1PnKAjInNZZNklAWKThNEbZ
# cF1S94w26IhEQqM0i6MflqcDsPU5t4xZtBUOizx++9M4G8amWnomJSdczUcKULla
# Az9yweFC1Gu6ENdw+ql5VOzCfpdH5Bn9Jkly5fxuI4vmnBz1PH1Dnd3P4wuLq2sL
# xna5dijVEhRc5mTKWjbp4nFfvQhucuEBPSNjgnZwEPbhciWxTMmB1GmyRvTxZy8v
# UY8PcoTlxdKeVQ6DTmkOirphpGj7HeNCEQnZppWs7vHys2oGi9kmR5qTKUNZxGrY
# 8yWiCiVDqbb50fhEC1srhph79bCij87QC1N33Bm+NuGjnjG4bKVx2B9DC8+6S/JS
# e3x6u+r0dd6/t0rjKnt1+inYqmM+i5lBJ7+R0yhWUQ+DYkvttNf5yiotD8qvccWJ
# Kcx14lfjPLK7siAMEY5K0bNMimhN4RR9oCLoPTOHei+vlxdfiMm2XPN61NNht5gD
# lYZ8JMBsEF/o2ebqTgsJrIHS+Q/8MqcwSunBc54fcXZoF+eiza3W2ArXLNfAEfGE
# U4JowNK2PrTIrpEjD+Vs0RsBBSmN5PcYIAz04ioODpDnYMq73/t3x9MKdVoxOT64
# AM7w58fSyWu8iwvkeA0d3XeVtSHFqZ49PqqIem4IegtnC/AXMUNrJ/VT99xHjeJY
# oLhOJz7LUg0=
# =FtaA
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 17 Feb 2023 13:34:37 GMT
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* tag 'for-upstream' of https://repo.or.cz/qemu/kevin: (22 commits)
hbitmap: fix hbitmap_status() return value for first dirty bit case
block/file-posix: don't use functions calling AIO_WAIT_WHILE in worker threads
MAINTAINERS: drop Vladimir from parallels block driver
block: temporarily hold the new AioContext of bs_top in bdrv_append()
block: Handle curl 7.55.0, 7.85.0 version changes
block: Assert non-coroutine context for bdrv_open_inherit()
block: Fix bdrv_co_create_opts_simple() to open images with no_co_wrapper
vpc: Fix .bdrv_co_create(_opts) to open images with no_co_wrapper
vmdk: Fix .bdrv_co_create(_opts) to open images with no_co_wrapper
vhdx: Fix .bdrv_co_create(_opts) to open images with no_co_wrapper
vdi: Fix .bdrv_co_create(_opts) to open images with no_co_wrapper
qed: Fix .bdrv_co_create(_opts) to open images with no_co_wrapper
qcow2: Fix open/create to open images with no_co_wrapper
qcow: Fix .bdrv_co_create(_opts) to open images with no_co_wrapper
parallels: Fix .bdrv_co_create(_opts) to open images with no_co_wrapper
luks: Fix .bdrv_co_create(_opts) to open images with no_co_wrapper
block: Create no_co_wrappers for open functions
block-coroutine-wrapper: Introduce no_co_wrapper
curl: Fix error path in curl_open()
configure: Enable -Wthread-safety if present
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Images can't be opened in coroutine context because opening needs to
change the block graph. Add no_co_wrappers so that coroutines have a
simple way of opening images in a BH instead.
At the same time, mark the wrapped functions as no_coroutine_fn.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230126172432.436111-3-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Some functions must not be called from coroutine context. The common
pattern to use them anyway from a coroutine is running them in a BH and
letting the calling coroutine yield to be woken up when the BH is
completed.
Instead of manually writing such wrappers, add support for generating
them to block-coroutine-wrapper.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230126172432.436111-2-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
FreeBSD implements pthread headers using TSA (thread safety analysis)
annotations, therefore when an application is compiled with
-Wthread-safety there are some locking/annotation requirements that the
user of the pthread API has to follow.
This will also be the case in QEMU, since bsd-user/mmap.c uses the
pthread API. Therefore when building it with -Wthread-safety the
compiler will throw warnings because the functions are not properly
annotated. We need TSA to be enabled because it ensures that the
critical sections of an annotated variable are properly locked.
In order to make the compiler happy and avoid adding all the necessary
macros to all callers (lock functions should use TSA_ACQUIRE, while
unlock TSA_RELEASE, and this applies to all users of pthread_mutex_lock
and pthread_mutex_unlock), simply use TSA_NO_TSA to supppress such
warnings.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20230117135203.3049709-3-eesposit@redhat.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
FreeBSD implements pthread headers using TSA (thread safety analysis)
annotations, therefore when an application is compiled with
-Wthread-safety there are some locking/annotation requirements that the
user of the pthread API has to follow.
This will also be the case in QEMU, since util/qemu-thread-posix.c uses
the pthread API. Therefore when building it with -Wthread-safety, the
compiler will throw warnings because the functions are not properly
annotated. We need TSA to be enabled because it ensures that the
critical sections of an annotated variable are properly locked.
In order to make the compiler happy and avoid adding all the necessary
macros to all callers (lock functions should use TSA_ACQUIRE, while
unlock TSA_RELEASE, and this applies to all users of pthread_mutex_lock
and pthread_mutex_unlock), simply use TSA_NO_TSA to supppress such
warnings.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20230117135203.3049709-2-eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The code that collects the available NIC models is not really specific
to PCI anymore and will be required in the next patch, too, so let's
move this into a new separate function in net.c instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Implement the basic mandatory part of VFIO migration protocol v2.
This includes all functionality that is necessary to support
VFIO_MIGRATION_STOP_COPY part of the v2 protocol.
The two protocols, v1 and v2, will co-exist and in the following patches
v1 protocol code will be removed.
There are several main differences between v1 and v2 protocols:
- VFIO device state is now represented as a finite state machine instead
of a bitmap.
- Migration interface with kernel is now done using VFIO_DEVICE_FEATURE
ioctl and normal read() and write() instead of the migration region.
- Pre-copy is made optional in v2 protocol. Support for pre-copy will be
added later on.
Detailed information about VFIO migration protocol v2 and its difference
compared to v1 protocol can be found here [1].
[1]
https://lore.kernel.org/all/20220224142024.147653-10-yishaih@nvidia.com/
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>.
Link: https://lore.kernel.org/r/20230216143630.25610-9-avihaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Currently VFIO migration doesn't implement some kind of intermediate
quiescent state in which P2P DMAs are quiesced before stopping or
running the device. This can cause problems in multi-device migration
where the devices are doing P2P DMAs, since the devices are not stopped
together at the same time.
Until such support is added, block migration of multiple devices.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Link: https://lore.kernel.org/r/20230216143630.25610-6-avihaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
GBPA register can be used to globally abort all
transactions.
It is described in the SMMU manual in "6.3.14 SMMU_GBPA".
ABORT reset value is IMPLEMENTATION DEFINED, it is chosen to
be zero(Do not abort incoming transactions).
Other fields have default values of Use Incoming.
If UPDATE is not set, the write is ignored. This is the only permitted
behavior in SMMUv3.2 and later.(6.3.14.1 Update procedure)
As this patch adds a new state to the SMMU (GBPA), it is added
in a new subsection for forward migration compatibility.
GBPA is only migrated if its value is different from the reset value.
It does this to be backward migration compatible if SW didn't write
the register.
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20230214094009.2445653-1-smostafa@google.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The microchip_icicle_kit, sifive_u, spike and virt boards are now doing
the same steps when '-kernel' is used:
- execute load_kernel()
- load init_rd()
- write kernel_cmdline
Let's fold everything inside riscv_load_kernel() to avoid code
repetition. To not change the behavior of boards that aren't calling
riscv_load_init(), add an 'load_initrd' flag to riscv_load_kernel() and
allow these boards to opt out from initrd loading.
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230206140022.2748401-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
