commit 9b70c1790a
virtio-serial: switch to standard-headers
changes virtio_console_config size from 8 to 12 bytes:
it adds an optional 4 byte emerg_wr field.
As this crosses a power of two boundary, this changes the PCI BAR size,
which breaks migration compatibility with old qemu machine types.
It's probably a problem for other transports as well.
As a temporary fix, as we don't yet support this new field anyway,
simply make the config size smaller at init time.
Long terms we probably want something along the lines
of virtio_net_set_config_size.
Reported-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Cole Robinson <crobinso@redhat.com>
virtio-serial api: guest_writable callback for users
# gpg: Signature made Thu Mar 19 12:06:55 2015 GMT using RSA key ID 854083B6
# gpg: Good signature from "Amit Shah <amit@amitshah.net>"
# gpg: aka "Amit Shah <amit@kernel.org>"
# gpg: aka "Amit Shah <amitshah@gmx.net>"
* remotes/amit/tags/vser-for-2.3-3:
virtio: serial: expose a 'guest_writable' callback for users
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Users of virtio-serial may want to know when a port becomes writable. A
port can stop accepting writes if the guest port is open but not being
read from. In this case, data gets queued up in the virtqueue, and
after the vq is full, writes to the port do not succeed.
When the guest reads off a vq element, and adds a new one for the host
to put data in, we can tell users the port is available for more writes,
via the new ->guest_writable() callback.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
target-arm queue:
* fix a bug in bitops.h
* implement SD card support on integratorcp
* add a missing 'compatible' property for Cortex-A57
* add Netduino 2 machine model
* fix command line parsing bug for CPU options with multiple CPUs
# gpg: Signature made Wed Mar 11 14:14:22 2015 GMT using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
* remotes/pmaydell/tags/pull-target-arm-20150311:
bitops.h: sextract64() return type should be int64_t, not uint64_t
integrator/cp: Implement CARDIN and WPROT signals
integrator/cp: Model CP control registers as sysbus device
target-arm: Add missing compatible property to A57
netduino2: Add the Netduino 2 Machine
stm32f205: Add the stm32f205 SoC
stm32f2xx_SYSCFG: Add the stm32f2xx SYSCFG
stm32f2xx_USART: Add the stm32f2xx USART Controller
stm32f2xx_timer: Add the stm32f2xx Timer
hw/arm/virt: fix cmdline parsing bug with CPU options and smp > 1
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Bonus fix: always set an error on failure. Some failures were silent
before, except for the generic error set by device_realize().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
pci, pc, virtio fixes and cleanups
A bunch of fixes all over the place.
All of ACPI refactoring has been merged.
Legacy pci commands have been dropped.
virtio header cleanup
initial patches from virtio-1.0 branch
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* remotes/mst/tags/for_upstream: (130 commits)
acpi: drop unused code
aml-build: comment fix
acpi-build: fix typo in comment
acpi: update generated files
vhost user:support vhost user nic for non msi guests
aml-build: fix build for glib < 2.22
acpi: update generated files
Makefile.target: binary depends on config-devices
acpi-test-data: update after pci rewrite
acpi, mem-hotplug: use PC_DIMM_SLOT_PROP in acpi_memory_plug_cb().
pci-hotplug-old: Has been dead for five major releases, bury
pci: Give a few helpers internal linkage
acpi: make build_*() routines static to aml-build.c
pc: acpi: remove not used anymore ssdt-[misc|pcihp].hex.generated blobs
pc: acpi-build: drop template patching and create PCI bus tree dynamically
tests: ACPI: update pc/SSDT.bridge due to new alg of PCI tree creation
pc: acpi-build: simplify PCI bus tree generation
tests: add ACPI blobs for qemu with bridge cases
tests: bios-tables-test: add support for testing bridges
tests: ACPI test blobs update due to PCI0._CRS changes
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Conflicts:
hw/pci/pci-hotplug-old.c
Add a helper function for checking whether a bit is set in the guest
features for a vdev as well as one that works on a feature bit set.
Convert code that open-coded this: It cleans up the code and makes it
easier to extend the guest feature bits.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add virtio_{add,clear}_feature helper functions for manipulating a
feature bits variable. This has some benefits over open coding:
- add check that the bit is in a sane range
- make it obvious at a glance what is going on
- have a central point to change when we want to extend feature bits
Convert existing code manipulating features to use the new helpers.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It's the same old loop copied five times, plus another instance where
it's clipped to two iterations and unrolled.
No external users of serial_isa_init() are left, so give it internal
linkage.
Maintainers of affected machines cc'ed.
Cc: Richard Henderson <rth@twiddle.net>
Cc: Anthony Liguori <aliguori@amazon.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Warning from the Sparse static analysis tool:
hw/char/virtio-serial-bus.c:31:3:
warning: symbol 'vserdevices' was not declared. Should it be static?
Cc: Amit Shah <amit.shah@redhat.com>
Cc: Anthony Liguori <aliguori@amazon.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Warnings from the Sparse static analysis tool:
hw/char/serial.c:630:26: warning: symbol
'vmstate_serial_thr_ipending' was not declared. Should it be static?
hw/char/serial.c:646:26: warning: symbol
'vmstate_serial_tsr' was not declared. Should it be static?
hw/char/serial.c:665:26: warning: symbol
'vmstate_serial_recv_fifo' was not declared. Should it be static?
hw/char/serial.c:681:26: warning: symbol
'vmstate_serial_xmit_fifo' was not declared. Should it be static?
hw/char/serial.c:697:26: warning: symbol
'vmstate_serial_fifo_timeout_timer' was not declared. Should it be static?
hw/char/serial.c:713:26: warning: symbol
'vmstate_serial_timeout_ipending' was not declared. Should it be static?
hw/char/serial.c:729:26: warning: symbol
'vmstate_serial_poll' was not declared. Should it be static?
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Migration fix for virtio-serial devices on bi-endian targets by David
Gibson.
# gpg: Signature made Mon 05 Jan 2015 07:26:07 GMT using RSA key ID 854083B6
# gpg: Good signature from "Amit Shah <amit@amitshah.net>"
# gpg: aka "Amit Shah <amit@kernel.org>"
# gpg: aka "Amit Shah <amitshah@gmx.net>"
* remotes/amit/tags/for-2.3:
virtio-serial: Don't keep a persistent copy of config space
virtio_serial: Don't use vser->config.max_nr_ports internally
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The 'config' field in the VirtIOSerial structure keeps a copy of the virtio
console's config space as visible to the guest, that is to say, in guest
endianness. This is fiddly to maintain, because on some targets, such as
powerpc, the "guest endianness" can change when a new guest OS boots.
In fact, there's no need to maintain such a guest view of config space -
instead we can reconstruct it from host-format data when it is accessed
with get_config.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
A number of places in the virtio_serial driver retrieve the number of ports
from vser->config.max_nr_ports, which is guest-endian. But for internal
users, we already have a host-endian copy of the number of ports in
vser->serial.max_virtserial_ports. Using that instead of the config field
removes the need for easy-to-forget byteswapping.
In particular this fixes a bug on incoming migration, where we don't adjust
the endianness vser->config correctly, because it hasn't yet been loaded
from the migration stream when virtio_serial_load_device() is called.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
If the THR interrupt is disabled, there is no need to migrate thr_ipending
because LSR.THRE will be sampled again when the interrupt is enabled.
(This is the behavior that is not documented in the datasheet, but
relied on by Windows!)
Note that in this case IIR will never be 0x2 so, if thr_ipending were
to be one, QEMU would produce the subsection.
Reported-by: Igor Mammedov <imammedo@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is disagreement on whether LSR.THRE should be resampled when
IER.THRI goes from 1 to 1. Bochs only does it if IER.THRI goes from 0
to 1; PCE does it even if IER.THRI is unchanged. But the Windows driver
seems to always go from 1 to 0 and back to 1, so do things in agreement
with Bochs, because the handling of thr_ipending was reported in 2010
(https://lists.gnu.org/archive/html/qemu-devel/2010-03/msg01914.html)
as breaking DR-DOS Plus.
Reported-by: Roy Tam <roytam@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When the transmit FIFO is emptied or enabled, the transmitter
hold register is empty. When it is disabled, it is also emptied and
in addition the previous contents of the transmitter hold register
are discarded. In either case, the THRE bit in LSR must be set and
THRI raised.
When the receive FIFO is emptied or enabled, the data ready and break
bits must be cleared in LSR. Likewise when the receive FIFO is disabled.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- assert TEMT is cleared before sending a character; we'll get one from
TSR if tsr_retry > 0, from the FIFO or THR otherwise
- assert THRE cleared and FIFO not empty (if enabled) before fetching a
character to send. This effectively reverts dffacd46, but the check
makes no sense and commit f702e62 (serial: change retry logic to avoid
concurrency, 2014-07-11) must have made it unnecessary. The commit
message for f702e62 talks about multiple calls to qemu_chr_fe_add_watch
triggering s->tsr_retry >= MAX_XMIT_RETRY, but other failures were
possible. For example, if you have multiple calls, the subsequent ones
will see s->tsr_retry == 0 and will find THRE and/or TEMT on entry.
- for clarity, raise THRI immediately after the code sets THRE
- check THRE to see if another character has to be sent. This makes
the assertions more obvious and also means TEMT has to be set as soon as
the loop ends. It makes the loop send both TSR and THR if flow-control
happens in non-FIFO mode. Previously, THR would be lost.
- clear TEMT together with THRE even in the non-FIFO case
The last two items are bugfixes, but they were just found by inspection
and do not squash known bugs.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is responsible for failure of migration from 2.2 to 2.1, because
thr_ipending is always one in practice.
serial.c is setting thr_ipending unconditionally. However, thr_ipending
is not used at all if THRI=0, and it will be overwritten again the next
time THRE or THRI changes. For that reason, we can set thr_ipending to
zero every time THRI is reset.
There is disagreement on whether LSR.THRE should be resampled when IER.THRI
goes from 1 to 1. This patch does not touch the code, leaving that for
QEMU 2.3+.
This has no semantic change and is enough to fix migration in the common
case where the interrupt is not pending or is reported in IIR. It does not
change the migration format, so 2.2.0 -> 2.1 will remain broken but we
can fix 2.2.1 -> 2.1 without breaking 2.2.1 <-> 2.2.0.
The case that remains broken (the one in which the subsection is strictly
necessary) is when THRE=1, the THRI interrupt has *not* been acknowledged
yet, and a higher-priority interrupt comes. In this case, you need the
subsection to tell the source that the lower-priority THRI interrupt is
pending. The subsection's breakage of migration, in this case, prevents
continuing the VM on the destination with an invalid state.
Cc: qemu-stable@nongnu.org
Reported-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Several bugfixes for s390x:
- instruction decoding and sparse warning in kvm
- overlong input and hangs in the sclp consoles
# gpg: Signature made Wed 05 Nov 2014 15:42:14 GMT using RSA key ID C6F02FAF
# gpg: Good signature from "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
* remotes/cohuck/tags/s390x-20141105:
s390x/sclpconsole: Avoid hanging SCLP ASCII console
s390x/sclpconsole-lm: Fix hanging SCLP line mode console
s390x/sclpconsole-lm: truncate input if line is too long
s390x/kvm: Fix warning from sparse
s390x/kvm: Fix opcode decoding for eb instruction handler
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It seems "name" is not mandatory, and the following command line (based
on one generated by current libvirt) will crash qemu at start:
qemu-system-x86_64 \
-device virtio-serial-pci \
-device virtserialport,name=foo \
-device virtconsole
Program received signal SIGSEGV, Segmentation fault.
__strcmp_ssse3 () at ../sysdeps/x86_64/strcmp.S:210
210 movlpd (%rsi), %xmm2
Missing separate debuginfos, use: debuginfo-install
python-libs-2.7.5-13.fc20.x86_64
(gdb) bt
#0 __strcmp_ssse3 () at ../sysdeps/x86_64/strcmp.S:210
#1 0x000055555566bdc6 in find_port_by_name (name=0x0) at /home/elmarco/src/qemu/hw/char/virtio-serial-bus.c:67
Signed-off-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Reviewed-by: Amos Kong <akong@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Force recalculation of file descriptor sets for main loop's poll(),
in order to be able to readd a possibly removed input file descriptor
after can_read() returned 0 (zero).
Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Trigger recalculating sets of file descriptors for the main loop's poll()
in order to make sure a possibly removed FD 0 from the poll() file
descriptor array is re-added. FD 0 is removed from the decriptor array
when the console's can_read() callback returns 0.
Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
As the SCLP line mode console input length is limited by the available
SCCB buffer space, it might lock up if the input does not fit into the
buffer.
With this patch, characters that don't fit are 'eaten' up to the next
CR/LF and the input line is sent truncated to the guest.
Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Right now, s->poll_msl may linger at "0" value for an arbitrarily long
time, until serial_update_msl is called for the first time. This is
unnecessary, and will lead to the s->poll_msl field being unnecessarily
migrated.
We can call serial_update_msl immediately at realize time (via
serial_reset) and be done with it. The memory-mapped UART was already
doing that, but not the ISA and PCI variants.
Regarding the delta bits, be consistent with what serial_reset does when
the serial port is not backed by a physical serial port, and always clear
them at reset time.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When a serial port is started, its initial state is all zero. Make
it consistent with reset state instead.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some fields were added to VMState by this patch to preserve correct
loading of the serial port controller state.
Updating FCR value while loading was also modified to disable generating
an interrupt by loadvm.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SCSI changes that enable sending vendor-specific commands via virtio-scsi.
Memory changes for QOMification and automatic tracking of MR lifetime.
# gpg: Signature made Mon 18 Aug 2014 13:03:09 BST using RSA key ID 9B4D86F2
# gpg: Good signature from "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: aka "Paolo Bonzini <bonzini@gnu.org>"
* remotes/bonzini/tags/for-upstream:
mtree: remove write-only field
memory: Use canonical path component as the name
memory: Use memory_region_name for name access
memory: constify memory_region_name
exec: Abstract away ref to memory region names
loader: Abstract away ref to memory region names
tpm_tis: remove instance_finalize callback
memory: remove memory_region_destroy
memory: convert memory_region_destroy to object_unparent
ioport: split deletion and destruction
nic: do not destroy memory regions in cleanup functions
vga: do not dynamically allocate chain4_alias
sysbus: remove unused function sysbus_del_io
qom: object: move unparenting to the child property's release callback
qom: object: delete properties before calling instance_finalize
virtio-scsi: implement parse_cdb
scsi-block, scsi-generic: implement parse_cdb
scsi-block: extract scsi_block_is_passthrough
scsi-bus: introduce parse_cdb in SCSIDeviceClass and SCSIBusInfo
scsi-bus: prepare scsi_req_new for introduction of parse_cdb
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Before adding new ports to VirtIOSerial devices, check if there's a
conflict in the 'name' parameter. This ensures two virtserialports with
identical names are not initialized.
Reported-by: <mazhang@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
To ensure two virtserialports don't get added to the system with the
same 'name' parameter, we need to access all the ports on all the
devices added, and compare the names.
We currently don't have a list of all VirtIOSerial devices added to the
system. This commit adds a simple linked list in which devices are put
when they're initialized, and removed when they go away.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
We keep port 0 reserved for compat with older guests, where only
virtio-console was expected. Even if a system is started without a
virtio-console port, port #0 is kept aside. However, after a
virtconsole port is unplugged, port id 0 became available, and the next
hotplug of a virtserialport caused failure due to it not being a console
port.
Steps to reproduce:
$ ./x86_64-softmmu/qemu-system-x86_64 -m 512 -cpu host -enable-kvm -device virtio-serial-pci -monitor stdio -vnc :1
QEMU 2.0.91 monitor - type 'help' for more information
(qemu) device_add virtconsole,id=p1
(qemu) device_del p1
(qemu) device_add virtserialport,id=p1
Port number 0 on virtio-serial devices reserved for virtconsole devices for backward compatibility.
Device 'virtserialport' could not be initialized
(qemu) quit
Reported-by: dengmin <mdeng@redhat.com>
Reviewed-by: Amos Kong <akong@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Whenever serial_xmit fails to transmit a byte it adds a watch that would
call it again when the "line" becomes ready. This results in a retry
chain:
serial_xmit -> add_watch -> serial_xmit
Each chain is able to transmit one character, and for every character
passed to serial by the guest driver a new chain is spawned.
The problem lays with the fact that a new chain is spawned even when
there is one already waiting on the watch. So there can be several retry
chains waiting concurrently on one "line". Every chain tries to transmit
current character, so character order is not messed up. But also every
chain increases retry counter (tsr_retry). If there are enough
concurrent chains this counter will hit MAX_XMIT_RETRY value and
the character will be dropped.
To reproduce this bug you need to feed serial output to some program
consuming it slowly enough. A python script from bug #1335444
description is an example of such program.
This commit changes retry logic in the following way to avoid
concurrency: instead of spawning a new chain for each character being
transmitted spawn only one and make it transmit characters until FIFO is
empty.
The change consists of two parts:
- add a do {} while () loop in serial_xmit (diff is a bit erratic
for this part, diff -w will show actual change),
- do not call serial_xmit from serial_ioport_write if there is one
waiting on the watch already.
This should fix another issue causing bug #1335444.
Signed-off-by: Kirill Batuzov <batuzovk@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
