Under KVM these registers are written by the hardware.
Restrict the writefn handlers to TCG to avoid when building
without TCG:
LINK aarch64-softmmu/qemu-system-aarch64
target/arm/helper.o: In function `do_ats_write':
target/arm/helper.c:3524: undefined reference to `raise_exception'
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200423073358.27155-2-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The RX ring descriptors control field is used for setting
SOF and EOF (start of frame and end of frame).
The SOF and EOF weren't cleared from the previous descriptors,
causing inconsistencies in ring buffer.
Fix that by clearing the control field of every descriptors we're
processing.
Signed-off-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20200418085145.489726-1-rfried.dev@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This prints the clocks attached to a DeviceState when using
"info qtree" monitor command. For every clock, it displays the
direction, the name and if the clock is forwarded. For input clock,
it displays also the frequency.
This is based on the original work of Frederic Konrad.
Here follows a sample of `info qtree` output on xilinx_zynq machine
after linux boot with only one uart clocked:
> bus: main-system-bus
> type System
> [...]
> dev: cadence_uart, id ""
> gpio-out "sysbus-irq" 1
> clock-in "refclk" freq_hz=0.000000e+00
> chardev = ""
> mmio 00000000e0001000/0000000000001000
> dev: cadence_uart, id ""
> gpio-out "sysbus-irq" 1
> clock-in "refclk" freq_hz=1.375661e+07
> chardev = "serial0"
> mmio 00000000e0000000/0000000000001000
> [...]
> dev: xilinx,zynq_slcr, id ""
> clock-out "uart1_ref_clk" freq_hz=0.000000e+00
> clock-out "uart0_ref_clk" freq_hz=1.375661e+07
> clock-in "ps_clk" freq_hz=3.333333e+07
> mmio 00000000f8000000/0000000000001000
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20200406135251.157596-10-damien.hedde@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Switch the cadence uart to multi-phase reset and add the
reference clock input.
The input clock frequency is added to the migration structure.
The reference clock controls the baudrate generation. If it disabled,
any input characters and events are ignored.
If this clock remains unconnected, the uart behaves as before
(it default to a 50MHz ref clock).
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200406135251.157596-8-damien.hedde@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add some clocks to zynq_slcr
+ the main input clock (ps_clk)
+ the reference clock outputs for each uart (uart0 & 1)
This commit also transitional the slcr to multi-phase reset as it is
required to initialize the clocks correctly.
The clock frequencies are computed using the internal pll & uart configuration
registers and the input ps_clk frequency.
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200406135251.157596-7-damien.hedde@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce a function and macro helpers to setup several clocks
in a device from a static array description.
An element of the array describes the clock (name and direction) as
well as the related callback and an optional offset to store the
created object pointer in the device state structure.
The array must be terminated by a special element QDEV_CLOCK_END.
This is based on the original work of Frederic Konrad.
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20200406135251.157596-5-damien.hedde@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
QAPI patches for 2020-04-30
# gpg: Signature made Thu 30 Apr 2020 06:29:18 BST
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-qapi-2020-04-30:
qapi: Generate simpler marshalling code when no arguments
qapi: Disallow qmp_marshal_FOO(NULL, ...)
qom: Simplify object_property_get_enum()
qapi: Only input visitors can actually fail
qapi: Assert non-input visitors see only valid alternate tags
qapi: Clean up visitor's recovery from input with invalid type
qapi: Assert non-input visitors see only valid narrow integers
qapi: Assert output visitors see only valid enum values
qapi: Fix Visitor contract for start_alternate()
qapi: Assert incomplete object occurs only in dealloc visitor
qapi: Polish prose in visitor.h
qapi: Document @errp usage more thoroughly in visitor.h
qapi: Fix typo in visit_start_list()'s contract
qapi: Fix the virtual walk example in visitor.h's big comment
qapi: Belatedly update visitor.h's big comment for QAPI modules
qemu-option: Clean up after the previous commit
qobject: Eliminate qdict_iter(), use qdict_first(), qdict_next()
qobject: Eliminate qlist_iter(), use QLIST_FOREACH_ENTRY() instead
qobject: Factor out helper json_pretty_newline()
qobject: Clean up QLIST_FOREACH_ENTRY()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This object may be used to represent a clock inside a clock tree.
A clock may be connected to another clock so that it receives update,
through a callback, whenever the source/parent clock is updated.
Although only the root clock of a clock tree controls the values
(represented as periods) of all clocks in tree, each clock holds
a local state containing the current value so that it can be fetched
independently. It will allows us to fullfill migration requirements
by migrating each clock independently of others.
This is based on the original work of Frederic Konrad.
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20200406135251.157596-2-damien.hedde@greensocs.com
[PMM: Use uint64_t rather than unsigned long long in trace events;
the dtrace backend can't handle the latter]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
NRF51_GPIO_REG_CNF_END doesn't actually refer to the start of the last
valid CNF register: it's referring to the last byte of the last valid
CNF register.
This hasn't been a problem up to now, as current implementation in
memory.c turns an unaligned 4-byte read from 0x77f to a single byte read
and the qtest only looks at the least-significant byte of the register.
But when running with patches which fix unaligned accesses in memory.c,
the qtest breaks.
Considering NRF51 doesn't support unaligned accesses, the simplest fix
is to actually set NRF51_GPIO_REG_CNF_END to the start of the last valid
CNF register: 0x77c.
Now, qtests work with or without the unaligned access patches.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Cameron Esfahani <dirty@apple.com>
Message-id: 51b427f06838622da783d38ba56e3630d6d85c60.1586925392.git.dirty@apple.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When command FOO has no arguments, its generated qmp_marshal_FOO() is
a bit confusing. Make it simpler:
visit_start_struct(v, NULL, NULL, 0, &err);
if (err) {
goto out;
}
-
- if (!err) {
- visit_check_struct(v, &err);
- }
+ visit_check_struct(v, &err);
visit_end_struct(v, NULL);
if (err) {
goto out;
}
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200424084338.26803-16-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
For QMP commands without arguments, gen_marshal() laboriously
generates a qmp_marshal_FOO() that copes with null @args. Turns
there's just one caller that passes null instead of an empty QDict.
Adjust that caller, and simplify gen_marshal().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200424084338.26803-15-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The previous few commits have made this more obvious, and removed the
one exception. Time to clarify the documentation, and drop dead error
checking.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200424084338.26803-13-armbru@redhat.com>
An alternate type's visit_type_FOO() fails when it runs into an
invalid ->type.
This is appropriate with an input visitor: visit_start_alternate()
sets ->type according to the input, and bad input can lead to bad
->type.
It should never happen with an output, clone or dealloc visitor: if it
did, the alternate being output, cloned or deallocated would be messed
up beyond repair. Assert that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200424084338.26803-12-armbru@redhat.com>
An alternate type's visit_type_FOO() fails when it runs into an
invalid ->type. If it's an input visit, we then need to free the the
object we got from visit_start_alternate(). We do that with
qapi_free_FOO(), which uses the dealloc visitor.
Trouble is that object is in a bad state: its ->type is invalid. So
the dealloc visitor will run into the same error again, and the error
recovery skips deallocating the alternate's (invalid) alternative.
Works, because qapi_free_FOO() ignores the error.
Avoid it instead: free the messed up object with by g_free().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200424084338.26803-11-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
visit_type_intN() and visit_type_uintN() fail when the value is out of
bounds.
This is appropriate with an input visitor: the value comes from input,
and input may be bad.
It should never happen with the other visitors: the value comes from
the caller, and callers must keep it within bounds. Assert that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200424084338.26803-10-armbru@redhat.com>
output_type_enum() fails when *obj is not a valid value of the enum
type. Should not happen. Drop the check, along with its unit tests.
This unmasks qapi_enum_lookup()'s assertion.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200424084338.26803-9-armbru@redhat.com>
[Commit message tweaked]
The contract demands v->start_alternate() for input and dealloc
visitors, but visit_start_alternate() actually requires it for input
and clone visitors. Fix the contract, and delete superfluous
qapi_dealloc_start_alternate().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200424084338.26803-8-armbru@redhat.com>
