When using clang, we get
ERROR: configure test passed without -Werror but failed with -Werror.
This is probably a bug in the configure script. The failing command
will be at the bottom of config.log.
You can run configure with --disable-werror to bypass this check.
What we really want from these two tests is whether the
entire code sequence is supported, including pragmas.
Adding -Werror makes the test properly fail for clang.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210719200112.295316-1-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The vhost_kernel and vhost_vdpa variables should be pre-initialized with
the $default_feature setting so that these features get disabled when
the user runs the configure scripts with --without-default-features.
Reported-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210713093155.677589-5-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The "xen" variable should either contain "enabled", "disabled" or
nothing (for auto detection). But when the user currently runs the
configure script with --without-default-features, it gets set to
"no" instead. This does not work as expected, the feature will still
be enabled if the Xen headers are present. Thus set the variable
to "disabled" instead if default_feature switch has been set.
Reported-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210713093155.677589-4-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, the block driver whitelists are only applied for the system
emulator. All other binaries still give unrestricted access to all block
drivers. There are use cases where this made sense because the main
concern was avoiding customers running VMs on less optimised block
drivers and getting bad performance. Allowing the same image format e.g.
as a target for 'qemu-img convert' is not a problem then.
However, if the concern is the supportability of the driver in general,
either in full or when used read-write, not applying the list driver
whitelist in tools doesn't help - especially since qemu-nbd and
qemu-storage-daemon now give access to more or less the same operations
in block drivers as running a system emulator.
In order to address this, introduce a new configure option that enforces
the driver whitelist in all binaries.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210709164141.254097-1-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If a user is trying to compile QEMU with link-time optimization
enabled by running the configure script like this:
.../configure --extra-cflags="-flto"
then the endianess test is failing since the magic values do not
show up in the intermediate object files there. If the host is
a big endian machine (like s390x), the QEMU binary is then unusable
since the corresponding variable "bigendian" is pre-initialized
with "no".
To fix this issue, we should rather create a full binary and look
for the magic strings there instead.
And we really should not continue the build if the endianess check
failed, to make it clear right from the start that something went
wrong here, thus let's also add some "exit 1" statements here
after emitting the error message.
Message-Id: <20210715083928.933806-1-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Aside from a minor bloat to file size the ability to have TCG plugins
has no real impact on performance unless a plugin is actively loaded.
Even then the libempty.so plugin shows only a minor degradation in
performance caused by the extra book keeping the TCG has to do to keep
track of instructions. As it's a useful feature lets just enable it by
default and reduce our testing matrix a little.
We need to move our linker testing earlier so we can be sure we can
enable the loader module required. As we have ruled out static &
plugins in an earlier patch we can also reduce the indent a little.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210709143005.1554-33-alex.bennee@linaro.org>
The next version of lttng-libs will not require liburcu at run time anymore.
Therefore, it is expected that distros will not include the urcubp libraries
anymore when installing lttng-ust-devel.
To avoid future problems, just require pkg-config to detect lttng-ust.
The .pc files for lttng-ust correctly include liburcubp.a for static
builds, and have always done since pkg-config files were added in 2011.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20210712155710.520889-1-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
While the default config works well enough it does end up enabling a
lot of stuff. For more minimal builds we can select a different list
of devices and let Kconfig work out what we want. For example:
../../configure --without-default-features \
--target-list=arm-softmmu,aarch64-softmmu \
--with-devices-aarch64=minimal
will override the aarch64-softmmu default set of devices with a more
minimal set of devices that just enables the virt and sbsa-ref models.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210707131744.26027-6-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While most libraries do not need a CONFIG_* symbol because the
"when:" clauses are enough, some do. Add them back or stop
using them if possible.
In the case of libpmem, the statement to add the CONFIG_* symbol
was still in configure, but could not be triggered because it
checked for "no" instead of "disabled" (and it would be wrong anyway
since the test for the library has not been done yet).
Reported-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Fixes: 587d59d6cc ("configure, meson: convert virgl detection to meson", 2021-07-06)
Fixes: 83ef16821a ("configure, meson: convert libdaxctl detection to meson", 2021-07-06)
Fixes: e36e8c70f6 ("configure, meson: convert libpmem detection to meson", 2021-07-06)
Fixes: 53c22b68e3 ("configure, meson: convert liburing detection to meson", 2021-07-06)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For some reason, libdaxctl option setting was set to work in an opposite
way (--enable-libdaxctl disabled it and vice versa). Fixing this so
configuration works properly.
Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210707063124.81954-1-mrezanin@redhat.com>
Fixes: 83ef16821a ("configure, meson: convert libdaxctl detection to meson", 2021-07-06)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Most of the build is not done via Makefiles, therefore the toolchain
variables are mostly unused. They are still used by tests/tcg
and pc-bios/roms, but most of them are not needed there.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
And remove them from the summary, since now their outcome is verbosely
included in the meson output.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is a duplicate of CONFIG_EVENTFD, handle it directly in meson.build.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All currently supported distros have vte 0.37 or newer, which is where the
ABI changed from 2.90 to 2.91. So drop support for the older ABI.
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All XTS configuration uses qemu_private_xts. Drop other variables as
they have only ever been used to generate the summary (which has since
been moved to meson.build).
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@liaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linux-user pull request 20210621
# gpg: Signature made Mon 21 Jun 2021 12:03:53 BST
# gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg: issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* remotes/vivier2/tags/linux-user-for-6.1-pull-request:
linux-user: Use public sigev_notify_thread_id member if available
linux-user: Fix incorrect use of feature-test-macros
linux-user: Check for ieee128 fpbits in PPC64 HWCAP2 feature list
tests/tcg/linux-test: Check that sigaction can query SIGKILL/SIGSTOP
linux-user: Let sigaction query SIGKILL/SIGSTOP
linux-user: Implement pivot_root
linux-user/trace-events: fix minor typo in format string
linux-user: Disable static assert involving __SIGRTMAX if it is missing
linux-user: Set CF_PARALLEL when mapping shared memory
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
s390x update:
- tcg: implement the vector enhancements facility and bump the
'qemu' cpu model to a stripped-down z14 GA2
- fix psw.mask handling in signals
- fix vfio-ccw sense data handling
# gpg: Signature made Mon 21 Jun 2021 10:53:00 BST
# gpg: using RSA key C3D0D66DC3624FF6A8C018CEDECF6B93C6F02FAF
# gpg: issuer "cohuck@redhat.com"
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>" [unknown]
# gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>" [full]
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>" [full]
# gpg: aka "Cornelia Huck <cohuck@kernel.org>" [unknown]
# gpg: aka "Cornelia Huck <cohuck@redhat.com>" [unknown]
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF
* remotes/cohuck-gitlab/tags/s390x-20210621: (37 commits)
s390x/css: Add passthrough IRB
s390x/css: Refactor IRB construction
s390x/css: Split out the IRB sense data
s390x/css: Introduce an ESW struct
linux-user/s390x: Save and restore psw.mask properly
target/s390x: Use s390_cpu_{set_psw, get_psw_mask} in gdbstub
target/s390x: Improve s390_cpu_dump_state vs cc_op
target/s390x: Do not modify cpu state in s390_cpu_get_psw_mask
target/s390x: Expose load_psw and get_psw_mask to cpu.h
configure: Check whether we can compile the s390-ccw bios with -msoft-float
s390x/cpumodel: Bump up QEMU model to a stripped-down IBM z14 GA2
s390x/tcg: We support Vector enhancements facility
linux-user: elf: s390x: Prepare for Vector enhancements facility
s390x/tcg: Implement VECTOR FP (MAXIMUM|MINIMUM)
s390x/tcg: Implement VECTOR FP NEGATIVE MULTIPLY AND (ADD|SUBTRACT)
s390x/tcg: Implement 32/128 bit for VECTOR FP MULTIPLY AND (ADD|SUBTRACT)
s390x/tcg: Implement 32/128 bit for VECTOR FP TEST DATA CLASS IMMEDIATE
s390x/tcg: Implement 32/128 bit for VECTOR FP PERFORM SIGN OPERATION
s390x/tcg: Implement 128 bit for VECTOR FP LOAD ROUNDED
s390x/tcg: Implement 64 bit for VECTOR FP LOAD LENGTHENED
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The -msoft-float switch is not available in older versions of Clang.
Since we rely on the compiler to not generate floating point instructions
unexpectedly, we block those old compilers now via a test in the configure
script. Note that for some weird reasons, the Clang compiler only complains
about the missing soft-float support if no other flags are passed via
"-Wl,..." to the linker. So we have to use "compile_object" instead of
"compile_prog" for this check.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210525142032.156989-1-thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
