For userland builds calls will normally be in range,
and for the exit_tb opcode the branch to the epilogue.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This assures us use of J for exit_tb and goto_tb, and JAL for calling
into the generated bswap helpers.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Choosing good addresses for them means we can use JAL for helper calls.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Bailing out when PK11_FindGenericObjects() returns null ensures the
loop that follows it executes at least once. The "loop did not
execute" test right after it is useless. Drop it.
Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
We suppress some code when we got unexpected status and assertion
checking is off:
assert(card_status == VCARD_DONE);
if (card_status == VCARD_DONE) {
int size = MIN(*receive_buf_len, response->b_total_len);
memcpy(receive_buf, response->b_data, size);
*receive_buf_len = size;
}
Such "recovery" is of dubious value even when it works. This one
doesn't: it fails to assign to receive_buf[] and *receive_buf_len,
which the callers expect.
Make the code unconditional.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The 'name' option silently failed when used in config files
( http://lists.gnu.org/archive/html/qemu-devel/2014-04/msg00378.html )
-readconfig stores the configuration read in QemuOpts. Command line
option parsing should do the same, and no more. In particular it should
not act upon the option. That needs to be done separately, where both
command line and -readconfig settings are visible in QemuOpts.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reported-by: William Dauchy <william@gandi.net>
Tested-by: William Dauchy <william@gandi.net>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(mjt: added commit message by ambru@ and subject prefix)
When libtool support was added to configure, the new temporary files
were left out of the list of files cleaned up on exit; this results
in a lot of stale .lo files being left around in /tmp. Worse, libtool
creates a /tmp/.libs directory which we can't easily clean up.
Put all our temporary files in a single temporary directory created
as a subdirectory of the build directory, so we can easily clean it up,
and don't need fragile or complicated code for creation to avoid it
clashing with temporary directories from other instances of QEMU
configure or being subject to attack from adversaries who can write
to /tmp.
Since the temporaries now live in the build tree, we have no
need to jump through hoops with a trap handler to try to remove
them when configure exits; this fixes some weird bugs where hitting
^C during a configure run wouldn't actually make it stop, because
we would run the trap handler but then not stop. (It is possible
to get the trap handler semantics right but it is convoluted largely
because of bugs in dash, so it is simpler to just avoid it.)
Note that "temporary files go in the build directory, not /tmp" is
the way autoconf behaves.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Calling dma_bdrv_unmap() twice is not necessary and may cause
potential problems if some code changes.
Signed-off-by: Jules Wang <junqing.wang@cs2c.com.cn>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Replace fprintf(stderr,...) with error_report() in the file
arch_init.c. The trailing "\n"s of the @fmt argument have been removed
because @fmt of error_report() should not contain newline.
Signed-off-by: Le Tan <tamlokveer@gmail.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
We have an unfortunate naming clash between the functions
ldl_p, stl_p, etc defined in bswap.h (which have semantics
"load/store in host endianness") and the #defines of the same
name in cpu-all.h (which have the semantics "load/store in
target endianness").
Fortunately it turns out that the only users of the bswap.h
functions are all within bswap.h itself, so we can simply
rename them to include a _he_ infix for "host endianness".
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The configure option --with-gtkabi=3.0 is still supported, but no longer
needed when GTK+-2.0 is missing. When no GTK+ ABI is selected by the
user, configure first tries 2.0, then 3.0.
For some platforms (e.g. Windows) newer binaries of GTK+ are only
available for GTK+ 3.0. Now building on these platforms is a little bit
easier.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Otherwise, the nbd client may hang waiting for the server response.
Signed-off-by: Hani Benhabiles <hani@linux.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The code in qemu_init_child_watch() wasn't clearing the 'struct
sigaction' before passing it to sigaction(); this meant that we
would block a random set of signals while executing the SIGCHLD
handler. Initialize properly by using memset() on the struct,
as we do in similar cases elsewhere.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This patch replaces g_malloc() in libcacard into g_new()
or g_new0() where appropriate (removing some init-to-zero
surrounding code), g_malloc+memcpy into g_memdup() and the
like.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Alon Levy <alevy@redhat.com>
Broken since dddbb2e1e3.
Do all the rest of the things that tcg_out_op did before
and after the big switch statement.
Signed-off-by: Richard Henderson <rth@twiddle.net>
* remotes/qmp-unstable/queue/qmp:
qapi: zero-initialize all QMP command parameters
scripts/qapi.py: Avoid syntax not supported by Python 2.4
doc: add "setup" to list of migration states
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
some s390 patches:
- Enable irqfds on s390 via the new adapter interrupt routing type.
As a prereq, fix the kvm enable_cap helpers for some compilers and
split the s390 flic into kvm and non-kvm parts.
- Enable software and hardware debugging support on s390. This needs a
kernel headers update.
# gpg: Signature made Tue 20 May 2014 12:30:54 BST using RSA key ID C6F02FAF
# gpg: Can't check signature: public key not found
* remotes/cohuck/tags/s390x-20140520:
s390x/kvm: hw debugging support via guest PER facility
s390x/kvm: software breakpoint support
s390x: remove duplicate definitions of DIAG 501
linux-headers: update
s390x/virtio-ccw: wire up irq routing and irqfds
s390x/virtio-ccw: reference-counted indicators
s390x: add I/O adapter registration
s390x: split flic into kvm and non-kvm parts
kvm: Fix enable_cap helpers on older gcc
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* remotes/bonzini/scsi-next:
megasas: remove buildtime strings
block: iscsi build fix if LIBISCSI_FEATURE_IOVECTOR is not defined
virtio-scsi: Plug memory leak on virtio_scsi_push_event() error path
scsi: Document intentional fall through in scsi_req_length()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In general QMP command parameter values are specified by consumers of the
QMP/HMP interface, but in the case of optional parameters these values may
be left uninitialized.
It is considered a bug for code to make use of optional parameters that have
not been flagged as being present by the marshalling code (via corresponding
has_<parameter> parameter), however our marshalling code will still pass
these uninitialized values on to the corresponding QMP function (to then
be ignored). Some compilers (clang in particular) consider this unsafe
however, and generate warnings as a result. As reported by Peter Maydell:
This is something clang's -fsanitize=undefined spotted. The
code generated by qapi-commands.py in qmp-marshal.c for
qmp_marshal_* functions where there are some optional
arguments looks like this:
bool has_force = false;
bool force;
mi = qmp_input_visitor_new_strict(QOBJECT(args));
v = qmp_input_get_visitor(mi);
visit_type_str(v, &device, "device", errp);
visit_start_optional(v, &has_force, "force", errp);
if (has_force) {
visit_type_bool(v, &force, "force", errp);
}
visit_end_optional(v, errp);
qmp_input_visitor_cleanup(mi);
if (error_is_set(errp)) {
goto out;
}
qmp_eject(device, has_force, force, errp);
In the case where has_force is false, we never initialize
force, but then we use it by passing it to qmp_eject.
I imagine we don't then actually use the value, but clang
complains in particular for 'bool' variables because the value
that ends up being loaded from memory for 'force' is not either
0 or 1 (being uninitialized stack contents).
Fix this by initializing all QMP command parameters to {0} in the
marshalling code prior to passing them on to the QMP functions.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The Python "except Foo as x" syntax was only introduced in
Python 2.6, but we aim to support Python 2.4 and later.
Use the old-style "except Foo, x" syntax instead, thus
fixing configure/compile on systems with older Python.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Character backend open hasn't been fully converted to the Error API.
Some opens fail without setting an error. qmp_chardev_add() needs to
detect when that happens, and set a generic error. Explain that in a
comment, and inline error_is_set() for clarity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Using error_is_set(ERRP) to find out whether a function failed is
either wrong, fragile, or unnecessarily opaque. It's wrong when ERRP
may be null, because errors go undetected when it is. It's fragile
when proving ERRP non-null involves a non-local argument. Else, it's
unnecessarily opaque (see commit 84d18f0).
The error_is_set(errp) in qemu_chr_new_from_opts() is merely fragile,
because the callers never pass a null errp argument.
Make the code more robust and more obviously correct: receive the
error in a local variable, then propagate it through the parameter.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Using error_is_set(errp) to check whether a function call failed is
fragile: it breaks when errp is null. Check perfectly suitable return
values instead when possible. As far as I can tell, errp can't be
null there, but this is more robust and more obviously correct
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Separate the search for a working addrinfo from the code that does
something with it. Makes for a clearer search loop.
Use a local Error * to simplify resetting the error in the search
loop.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
On a slow VM (e.g., nested), you see the "setup" state when you query the
migration status.
Signed-off-by: Peter Feiner <peter@gridcentric.ca>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Using __DATE__ or __TIME__ in binary pkgs changes the checksum of
compiled binaries if they get rebuilt, even if there are no other
source changes. Replace the dynamic strings with some equally
informative static strings.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch makes use of the hw debugging support in kvm (provided by the guest's
PER facility) on s390. It enables the following features, available using the
gdbserver:
- single-stepping
- hw breakpoints
- hw watchpoints
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
This patch allows to insert and remove sw breakpoints using the QEMU gdbserver
on s390 as well as to interrupt execution on a breakpoint hit when running
with KVM enabled.
Whenever a software breakpoint is inserted, common code calls kvm ioctl
KVM_UPDATE_GUEST_DEBUG. As this method's default on s390 is to return an error
if not implement, the insertion will fail. Therefore, KVM also has to be
updated in order to make use of software breakpoints.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
When restoring the previously saved instruction in
kvm_arch_remove_sw_breakpoint(), we only restored one byte. Let's use
the sizeof() operator to make sure we restore the entire instruction.
While we are at it, let's remove the duplicate definitions of DIAG 501
and replace its size (used when reading/writing the instruction) with
a sizeof() operator to make the code self explaining and less error-prone.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Make use of the new s390 adapter irq routing support to enable real
in-kernel irqfds for virtio-ccw with adapter interrupts.
Note that s390 doesn't provide the common KVM_CAP_IRQCHIP capability, but
rather needs KVM_CAP_S390_IRQCHIP to be enabled. This is to ensure backward
compatibility.
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Make code using the same indicators point to a single allocated structure
that is freed when the last user goes away.
This will be used by the irqfd code to unmap addresses after the last user
is gone.
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Introduce a common parent class for both cases, where kvm and non-kvm
can hook up callbacks. This will be used by follow-on patches for
adapter registration and mapping.
We now always have a flic, regardless of whether we use kvm; the
non-kvm implementation just doesn't do anything.
Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Commit 40f1ee27aa introduced handy helpers for enable_cap calls on
vcpu and vm level. Unfortunately some older gcc versions (4.7.1, 4.6)
seem to choke on signedness detection in inline created variables:
target-ppc/kvm.c: In function 'kvmppc_booke_watchdog_enable':
target-ppc/kvm.c:1302:21: error: comparison of unsigned expression < 0 is always false [-Werror=type-limits]
target-ppc/kvm.c: In function 'kvmppc_set_papr':
target-ppc/kvm.c:1504:21: error: comparison of unsigned expression < 0 is always false [-Werror=type-limits]
However - thanks to Thomas Huth for the suggestion - we can just cast the
offending potentially 0 value to a signed type, making the comparison signed.
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Block patches
# gpg: Signature made Mon 19 May 2014 15:21:14 BST using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream: (22 commits)
block: optimize zero writes with bdrv_write_zeroes
blockdev: add a function to parse enum ids from strings
util: add qemu_iovec_is_zero
qcow1: Stricter backing file length check
qcow1: Validate image size (CVE-2014-0223)
qcow1: Validate L2 table size (CVE-2014-0222)
qcow1: Check maximum cluster size
qcow1: Make padding in the header explicit
curl: Add usage documentation
curl: Add sslverify option
curl: Remove broken parsing of options from url
curl: Fix build when curl_multi_socket_action isn't available
qemu-iotests: Fix blkdebug in VM drive in 030
qemu-iotests: Fix core dump suppression in test 039
iotests: Add test for the JSON protocol
block: Allow JSON filenames
check-qdict: Add test for qdict_join()
qdict: Add qdict_join()
block: add test for vhdx image created by Disk2VHD
block: vhdx - account for identical header sections
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit b03c380 introduced the function
iscsi_allocationmap_is_allocated(), however it is only used within a
code block that is conditionally compiled. This produces a warning
(error with -werror) of "defined but not used" for the the function, if
LIBISCSI_FEATURE_IOVECTOR is not defined.
This wraps iscsi_allocationmap_is_allocated() in the same conditional.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a U suffix to avoid shifting into the sign bit (which is
undefined behaviour in C).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
linux kernel 3.12 has changed intel-hda
driver to always check for FIFORDY, this
causes long hangs in guest since QEMU
always has this bit set to 0. We now simply set
it to 1 always, since we're synchronous anyway
and always ready to receive the stream
Signed-off-by: Stanislav Vorobiov <s.vorobiov@samsung.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* remotes/qmp-unstable/queue/qmp:
qapi: skip redundant includes
monitor: Add netdev_del id argument completion.
monitor: Add netdev_add type argument completion.
monitor: Add set_link arguments completion.
monitor: Add chardev-add backend argument completion.
monitor: Add chardev-remove command completion.
monitor: Convert sendkey to use command_completion.
qapi: Show qapi-commands.py invocation in qapi-code-gen.txt
qapi: Replace uncommon use of the error API by the common one
tests: Don't call visit_end_struct() after visit_start_struct() fails
hw: Don't call visit_end_struct() after visit_start_struct() fails
hmp: Call visit_end_struct() after visit_start_struct() succeeds
qapi: Un-inline visit of implicit struct
qapi-visit.py: Clean up a sloppy use of field prefix
qapi: Clean up shadowing of parameters and locals in inner scopes
qapi-visit.py: Clean up confusing push_indent() / pop_indent() use
qapi: Replace start_optional()/end_optional() by optional()
qapi: Remove unused Visitor callbacks start_handle(), end_handle()
qapi: Normalize marshalling's visitor initialization and cleanup
qapi: Update qapi-code-gen.txt example to match current code
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
